BMW Engine Parts for BMW F83 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Bimmerworld - Corporate Logo
T#:39329309
Part#: 118.11.680.0001
Ships in 5 Business Days
$ 562.99 USD
Free Shipping on orders $49 and up
This kit includes the components needed to delete your factory oil level sensor and add a traditional oil dipstick instead. This is the oil dipstick tube used in the F82 M4 GT4 race car, which is bolted to the underside of the oil pan where the electronic oil level sensor would be installed normally.
Show More Show Less
Supertech - Corporate Logo
T#:21604322
Part#: RET-BMN54-TI-12
Ships in 8 Business Days
$ 197.99 USD
Free Shipping on orders $49 and up
7 Degree - 5mm valve stem - Single or Tripe Groove Valves
Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less

Supertech - Corporate Logo
T#:14783498
Part#: BMIVN-1055S-12
Ships in 8 Business Days
$ 310.99 USD
Free Shipping on orders $49 and up
Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Genuine BMW - Corporate Logo
T#:56724745
Part#: 83195B683D4
Ships in 6 Business Days
New Item
6% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
Proper surface preparation is vital when securing engine seals, oil pan gaskets, or plastic components on your BMW. Genuine BMW sourced Loctite 770 Surface Primer, designed to treat low-energy plastic and rubber elastomeric surfaces before applying bonding agents. Using this factory recommended primer ensures engine seals stay firmly positioned during assembly and holds up under rigorous engine bay heat and vibrations.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161745
Part#: 601-0331
Ships in 7 Business Days
$ 699.99 USD
Free Shipping on orders $49 and up
Designed for BMW F3x/F8x models, this billet top hat is the best solution for enthusiasts who demand more from their vehicle's fuel system. A quality upgrade engineered to deliver unparalleled fuel system reliability and versatility.
Show More Show Less

Supertech - Corporate Logo
T#:21604321
Part#: RET-BMN54-TE-12
Ships in 8 Business Days
$ 197.99 USD
Free Shipping on orders $49 and up
7 Degree - 6mm valve stem - Single or Tripe Groove Valves
Precision Raceworks - Corporate Logo
T#:38161705
Part#: 101-0258
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is designed for high-performance fuel systems, providing efficient filtration to protect vital components in your BMW. With a 6-micron filtration capability, this element ensures that harmful debris and contaminants are removed, safeguarding fuel pumps, injectors, and other critical parts from damage. Whether you're racing or daily driving, this filter helps maintain optimal fuel flow, ensuring consistent engine performance under all conditions.

This dual open design fits seamlessly into Precision Raceworks inline fuel filters, offering reliable and efficient performance for both street and track applications. Easy to replace and designed for maximum protection, this filter element helps keep your fuel system in top condition, ensuring long-lasting performance and reliability.

  • 6-micron filtration – Effectively removes harmful contaminants, improving fuel system longevity
  • Dual open design – Provides balanced flow and efficient filtration for superior fuel system protection
  • Precision-engineered – Custom fit for Precision Raceworks inline fuel filters, ensuring easy installation
  • Durable construction – Built with high-quality materials to withstand demanding driving conditions
  • Protects critical components – Safeguards fuel pumps, injectors, and more from debris and impurities
  • Simple maintenance – Quick and easy to replace, ensuring your system performs at its best
  • Versatile usage – Suitable for both high-performance racing and daily driving

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect twice per season and replace as needed to maintain peak performance
  • Daily driving: Inspect at least once per year or every 6,000 miles for preventative maintenance

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is an essential upgrade to keep your BMW’s fuel system running smoothly and protected from contaminants.

Show More Show Less

Supertech - Corporate Logo
T#:14816646
Part#: BMEVI-1055S-HS-1
Ships in 4 Business Days
$ 660.99 USD
Free Shipping on orders $49 and up
Single Groove sodium filled exhaust valve set for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm
Show More Show Less

NOCO - Corporate Logo
T#:641121
Part#: GBC010
Ships in 8 Business Days
24% off MSRP $ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.94 USD
Free Shipping on orders $49 and up
24% off MSRP
$ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.94 USD
Free Shipping on orders $49 and up

The NOCO GBC010 12V Accessory Kit is designed to connect directly to the XGC IN and OUT ports of NOCO Boost jump starters. This kit allows you to effortlessly power your preferred 12-volt devices directly from a GB70, GB150, GB250+, GB251+, or GB500+, such as a tire inflator, vacuum, coffee maker, fan, cooler, and more. Constructed from high-conductivity 16AWG 100% copper wire, it boasts a rated capacity of 15 amperes.


Features: 

  • Recharge NOCO Boost UltraSafe Lithium Jump Starters from a vehicles 12-volt power source.
  • Compatible with NOCO Boost UltraSafe Lithium Jump Starter models GB70, GB150 GB250+, GB251+ and GB500+.
  • Power 12-volt device like a tire inflator, vacuum and more.
  • High-conductivity 16 AWG copper wire and rated capacity of 15-amperes.
  • Molded strain reliefs prevent unwanted strain on the XGC wire connections.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
NOCO - Corporate Logo
T#:855031
Part#: GENPRO10X2
Ships in 8 Business Days
21% off MSRP $ 284.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping on orders $49 and up
21% off MSRP
$ 284.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping on orders $49 and up

The GENPRO10X2 is an upgraded version of our GEN2 with enhanced features. This model is 19% smaller yet delivers 33% more power, making it one of the most high-performing onboard marine battery chargers NOCO has ever produced. It's a two-bank onboard battery charger with a 20-amp rating (10 amps per bank) designed for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. You can independently charge and control each battery bank using selectable charging modes such as 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, suitable for all types of lead-acid and lithium-ion batteries.


Features: 

  • A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
  • Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid batteries.
  • An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
  • Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
  • Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
  • It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
  • A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
  • A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094344
Part#: 201-0177
Ships in 10 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds


Precision Raceworks - Corporate Logo
T#:38094345
Part#: 601-0189
Ships in 10 Business Days
$ 999.99 USD
Free Shipping on orders $49 and up
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1200cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less
Supertech - Corporate Logo
T#:21604309
Part#: SPRKFE20N54BE2
Ships in 5 Business Days
$ 965.99 USD
Free Shipping on orders $49 and up
Supertech has the high performance valvetrain components you need to take your build to the next level. ​​Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161752
Part#: 201-0148
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161737
Part#: 201-0406
Ships on Oct 21, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Mosselman Turbosystems - Corporate Logo
T#:37183640
Part#: 030210063RED
Special Order: No Guaranteed ETA
$ 459.00 USD
Free Shipping on orders $49 and up
The S55 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.
Show More Show Less
BMW F8X M3 M4 ECS Magnetic Oil Drain Plug (10 Washers)
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:386494
Part#: 013862ECS02A
Special Order: No Guaranteed ETA
Sale - Save 25% $ 36.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 36.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.74 USD
Free Shipping on orders $49 and up

Enhance your BMW's engine protection with the BMW F8X M3 M4 ECS Magnetic Oil Drain Plug. Engineered for superior performance, this magnetic oil drain plug effectively traps metal particles and debris in the engine oil, preventing them from circulating and causing damage. With its durable construction and easy installation, it offers added peace of mind for BMW F8X M3 and M4 owners. Keep your BMW's engine running smoothly and efficiently with this essential oil drain plug.

  • Traps metal particles and debris in engine oil
  • Prevents damage to engine components
  • Durable construction for long-lasting use
  • Easy installation for added convenience
Show More Show Less

Febi Oil Pan Gasket
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16375133
Part#: 11137600482
Ships on Dec 23, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.
MMX Performance - Corporate Logo
T#:4552049
Part#: MMR03-0502-KP
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less

Valve Cover Gasket - Set
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:54068660
Part#: 11127587804
In Stock
New Item
Sale - Save 15% $ 26.99

This product was last offered at the strikethrough price on
09-16-2026

$ 22.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 26.99

This product was last offered at the strikethrough price on
09-16-2026

$ 22.94 USD
Free Shipping on orders $49 and up

Kolbenschmidt - Corporate Logo
T#:31092510
Part#: 11367583208
Special Order: No Guaranteed ETA
$ 103.99

This product was last offered at the strikethrough price on
03-31-2026

$ 94.99 USD
Free Shipping on orders $49 and up
$ 94.99 USD
Free Shipping on orders $49 and up
This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the exhaust camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.
Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:25009257
Part#: 29523TMS01EBKT
Back Ordered
Sale - Save 19% $ 700.93

This product was last offered at the strikethrough price on
05-05-2026

$ 566.98 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 700.93

This product was last offered at the strikethrough price on
05-05-2026

$ 566.98 USD
Free Shipping on orders $49 and up

Enhance your S55 equipped BMW with the Turner Carbon Fiber Engine Cover, a stunning direct replacement for the factory plastic cover. This carbon fiber upgrade fits just like OE, offering a reversible design that can be effortlessly removed in seconds. Crafted entirely from authentic, hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, and finished in a beautiful gloss clear coat for UV-protection and extra durability. Elevate your engine bay's aesthetics with this sleek factory look that's sure to turn heads. Transform your engine bay today and enjoy the following features:

  • Direct replacement for factory plastic engine cover
  • Authentic hand-laid carbon fiber material
  • Reversible and easily removable design
  • Gloss clear coat for UV-protection and durability

Set of 6 Blue Performance Ignition Coils

Designed for performance and efficiency, Turner BMW ignition coils are modified to increase energy output, resulting in a faster, more efficient, and consistent burn. The blue housing adds both performance and aesthetic appeal to your engine. Ignition coils are crucial for your engine's health, performance, and efficiency, and Turner Ignition Coils are the ideal choice for maintaining a strong and healthy engine.

  • Increased performance
  • Direct fitment
  • Signature Turner Blue finish
Show More Show Less
Corteco - Corporate Logo
T#:15478721
Part#: 11127587804
Back Ordered
$ 28.99 USD
Free Shipping on orders $49 and up
A leaky valve cover gasket makes a mess of your engine, your garage, and allows the life-blood of your engine to escape. Replace leaky valve cover gaskets and always start with a fresh gasket after valve cover removal. Trouble trying to track down your leak? The easiest way to do so is by cleaning your engine, then examining for leaks.
Show More Show Less


Nostrum - Corporate Logo
T#:26771703
Part#: H750-1605
Back Ordered
$ 2,199.00 USD
Free Shipping on orders $49 and up
WHP potential on Gasoline: 1000 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) WHP potential on E85: 730 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) Flow Rate: 20.2 g/s @ 100 bar Flow rate increase over Stock:85% Max Operating Pressure: 250bar / 25MPa / 3625psi Tune required?: Yes Recommended Tuning Suite: Ecutek & Bootmod3
Show More Show Less
Genuine BMW - Corporate Logo
T#:34635
Part#: 11367524954
In Stock
10% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.48 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.48 USD
Free Shipping on orders $49 and up


Genuine BMW Collar Screw - M10X1X94
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less
Rubber O-Ring - Bremmen Parts
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:22525960
Part#: 11531435808
In Stock
Sale - Save 20% $ 2.03

This product was last offered at the strikethrough price on
05-03-2026

$ 1.62 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 2.03

This product was last offered at the strikethrough price on
05-03-2026

$ 1.62 USD
Free Shipping on orders $49 and up
Useful for fixing leaks on air conditioning, fuel, and vacuum systems. Measures 20x3.

1/2"/12mm Band Hose Clamp - 20-32mm
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:363015
Part#: 003402ECS05A-05
In Stock
Sale - Save 25% $ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD
Free Shipping on orders $49 and up

ECS 1/2"/12mm Band Hose Clamp - 20-32mm

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

  • Premium 304 stainless steel construction for durability
  • German-style T-bolt design for easy size adjustment
  • Versatile band widths cater to different hose sizes
  • Eliminates the need for expensive dealership purchases
  • Ensures secure and reliable hose connections
Show More Show Less

Genuine BMW - Corporate Logo
T#:181155
Part#: 31306863134
In Stock
$ 7.40 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Bolt With Washer - M10X30-10.9
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Elring Turbo O-Ring - N54 BMW
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:363384
Part#: 11427558936
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up

Used to seal the oil lines and water coolant lines of the turbo. We recommend replacing these with any and all turbo services or whenever these lines need to be removed from the turbo.

With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time.

Fits the following BMW's:
E60 E61 E71 E82 E88 E90 E92 E93 F01 F02 F25 Z4 - With the N54 engine

Show More Show Less

Genuine BMW - Corporate Logo
T#:19275
Part#: 11127593376
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
Nuts, bolts, washers, and clips are used to keep your car together, but when you decide to do work on your vehicle, these small components can easily go missing. These ASA Stud Bolts are used in your cylinder head, so needless to say, they are vital to your motor's health. Fits BMW Engines including: N20,N26,N51,N52,N52N,N54,N54T,N55,S55
Show More Show Less
Performance Work Gloves - XL
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:32284516
Part#: 3422SCH03A
In Stock
Sale - Save 25% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.74 USD
Free Shipping on orders $49 and up

Schwaben Professional Mechanic's Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

Designed for precision, these gloves offer high dexterity, making it easy to handle even the smallest parts. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Note: See manufacturers information tab for sizing chart.


Key Features:

  • High Dexterity: Perfect for picking up small parts with ease.
  • Secure Fit: Tailored elastic cuff with a hook-and-loop closure.
  • Enhanced Grip: Textured latex coating on palm and fingertips.
  • All-Day Comfort: Breathable spandex backing and knit top.
  • Durable Design: Synthetic leather palm for extended wear.
  • Unique Style: Graphic design inspired by the drifting culture of Euro owners.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Genuine BMW - Corporate Logo
T#:42226
Part#: 13537577649
In Stock
$ 16.76 USD
Free Shipping on orders $49 and up


Genuine BMW Decoupling Element -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less

Genuine BMW - Corporate Logo
T#:12681
Part#: 21207548052
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
GENUINE BMW FILLISTER-HEAD SCREW, MICRO-:219500
Elring Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:590266
Part#: 11127589830
In Stock
$ 4.58 USD
Free Shipping on orders $49 and up
$ 4.58 USD
Free Shipping on orders $49 and up
Seals the spark plug recess insert to the valve cover
Elring Oil Filter Housing Gasket - N52 N54 N55
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362586
Part#: 11427537293
In Stock
$ 13.39

This product was last offered at the strikethrough price on
09-09-2026

$ 13.25 USD
Free Shipping on orders $49 and up
$ 13.25 USD
Free Shipping on orders $49 and up
If your oil filter housing is leaking oil, it is probably the gasket. Replace the faulty gasket with this Elring gasket to ensure your oil filter housing stay well sealed.


ECS - Corporate Logo
T#:585807
Part#: 11217849234WPC
In Stock
Sale - Save 35% $ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.63 USD
Free Shipping on orders $49 and up
Sale - Save 35%
$ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.63 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:54035
Part#: 31106797237
In Stock
5% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.88 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.88 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Screw With Collar - M12X1,5X85-10.9
This item fits the following BMW Chassis:
E90,E92,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

ECS - Corporate Logo
T#:637408
Part#: 028092ECS11AKT
Ships on Nov 3, 2026
Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD
Free Shipping on orders $49 and up

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

  • Made from high-quality stainless steel for durability and corrosion resistance
  • M18x1.5mm threads ensure compatibility with most oxygen sensors
  • Ideal for custom exhaust setups or replacing damaged bungs
  • Essential for automotive enthusiasts looking to upgrade their exhaust system
Show More Show Less

Schwaben Black Mechanics Gloves - Large
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:366782
Part#: 010337SCH02A
In Stock
Sale - Save 25% $ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD
Free Shipping on orders $49 and up

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Show More Show Less

Genuine BMW - Corporate Logo
T#:19658
Part#: 11117589711
In Stock
13% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.19 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.19 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Bolt - M10X100
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less
Genuine BMW - Corporate Logo
T#:12358
Part#: 07149126885
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
GENUINE BMW HEX BOLT:079510

Schwaben Performance Work Gloves - Choose Your Size
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:36100141
Part#: 3422SCH05
In Stock
Sale - Save 25% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 12.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 12.74 USD
Free Shipping on orders $49 and up

Schwaben Performance Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

These gloves are designed for precision and offer high dexterity, making it easy to handle even the smallest automotive components. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Key Features:

High Dexterity: Perfect for picking up small parts with ease. Secure Fit: Tailored elastic cuff with a hook-and-loop closure. Enhanced Grip: Textured latex coating on palm and fingertips. All-Day Comfort: Breathable spandex backing and knit top. Durable Design: Synthetic leather palm for extended wear. Unique Style: Graphic design inspired by the drifting culture of Euro owners.

Check which size you need here!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Genuine BMW - Corporate Logo
T#:27597
Part#: 07119904670
Ships in 1 Business Day
$ 3.48 USD
Free Shipping on orders $49 and up


Genuine BMW Flange Nut
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E83 X3,E89 Z4,E90,E92,E93,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Show More Show Less

Genuine BMW - Corporate Logo
T#:35393
Part#: 11427577017
In Stock
21% off MSRP $ 13.63

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.76 USD
Free Shipping on orders $49 and up
21% off MSRP
$ 13.63

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.76 USD
Free Shipping on orders $49 and up


Genuine BMW Gasket Asbestos Free -
This item fits the following BMW Chassis:
E89 Z4,F02,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,S55

Show More Show Less

CTA Tools - Corporate Logo
T#:641669
Part#: CTA2028
In Stock
$ 9.27 USD
Free Shipping on orders $49 and up
Installs and removes piston rings without damaging
Universal Piston Ring Compressor
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:25805755
Part#: 3592SCH01A
In Stock
Sale - Save 23% $ 20.99

This product was last offered at the strikethrough price on
04-26-2026

$ 16.14 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 20.99

This product was last offered at the strikethrough price on
04-26-2026

$ 16.14 USD
Free Shipping on orders $49 and up

The Schwaben Universal Piston Ring Compressor is a must-have tool for easily and precisely compressing piston rings.

Standing 4 inches high, this compressor features two spring steel bands that provide evenly distributed pressure across all piston rings, accommodating pistons ranging from 60 mm to 175 mm in diameter. Designed for use on all passenger vehicles, this tool ensures efficient and reliable compression.

**Note** For the Schwaben Piston Ring Filer, check out T25805754!


Key Features:

  • Versatile Capacity: Handles most pistons from 60 mm to 175 mm in diameter.
  • Even Pressure Distribution: Two spring steel bands equally distribute tension for easy and effective compression.
  • Durable Construction: Made from sheet steel for long-lasting performance.
  • User-Friendly: Features an easy thumb release locking mechanism for quick and secure operation.
  • Universal Application: Suitable for use on all passenger vehicles.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Genuine BMW - Corporate Logo
T#:78250
Part#: 51127070202
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up


Genuine BMW Clip Nut - M6-Zns3
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E39 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i12

Show More Show Less


Impulse Sender - Timing Chain Sprocket - N52 N55 S55
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:43784125
Part#: 11367578877
In Stock
Sale - Save 22% $ 22.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.94 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 22.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.94 USD
Free Shipping on orders $49 and up

The impulse sending wheel, located on both the intake and exhaust camshaft adjustment units, provides critical timing data to the camshaft position sensor, keeping your VANOS system synchronized. A worn or malfunctioning impulse sender can cause a myriad of performance issues, including hard starts and rough idle.

Whether you are performing a proactive timing system overhaul or addressing a component failure, Bremmen Parts offers a high-quality replacement designed for a precise fit and long-term durability.

Show More Show Less
Genuine BMW - Corporate Logo
T#:28823
Part#: 07129904819
In Stock
$ 2.50 USD
Free Shipping on orders $49 and up


Genuine BMW Torx-Bolt With Washer
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E53 X5 X5,E63,E65,E70 X5,E71 X6,E83 X3,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F30,F33,F80 M3,F82 M4,F83,i3

Show More Show Less