VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 5 Business Days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

URO Fuel Vapor Detection Pump - F2X F3X F8X

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:37892132

Part#: 16137448092

In Stock

$ 78.19 USD

Add to Wish List

Qty

$ 78.19 USD

Add to Wish List

URO Fuel Vapor Detection Pump - F2X F3X F8X

Engineered to deliver accurate pressure for identifying emissions system leakage, the URO Fuel Vapor Detection Pump is a direct-fit OE replacement for BMW F2X, F3X, and F8X models. Its precise design ensures easy installation, while alloy conductors minimize electrical resistance, enabling efficient and reliable pump operation. This high-quality component helps maintain optimal emissions system performance, ensuring your vehicle meets environmental standards and operates at peak efficiency. A trusted solution for BMW owners, this pump is built for durability and performance.

Key Benefits:

Provides accurate pressure to detect emissions system leakage.
Direct-fit OE replacement design for easy and hassle-free installation.
Alloy conductors minimize electrical resistance for efficient operation.
Ensures optimal emissions system performance and compliance.
Compatible with BMW F2X, F3X, and F8X models.
Engineered for durability and long-lasting reliability.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

URO Drive Belt Tensioner W/ Pulley - BMW F8X M2 M3 M4

T#:50066851

Part#: 11288088632

In Stock

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Replaces broken or damaged drive belt tensioner.

Valve Cover Gasket - Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:586660

Part#: 11127587804

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

URO Valvetronic Actuator

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34549585

Part#: 11377603979

In Stock

Sale - Save 15% $ 303.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.62 USD

Add to Wish List

Qty

Sale - Save 15%

$ 303.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.62 USD

Add to Wish List

The URO Valvetronic Actuator is a high-quality replacement part for BMW engines, designed to restore precise control over valve timing and lift, enhancing engine performance, fuel efficiency, and responsiveness. Built to meet strict OEM standards, this actuator helps optimize the power and efficiency of BMW engines, making it an ideal solution for maintenance or repair. Available from Turner Motorsport, the URO Valvetronic Actuator ensures a reliable fit and excellent performance for BMW owners.

Restores optimal control over valve timing for enhanced engine efficiency
Improves throttle response and provides smoother acceleration
Contributes to lower emissions and better fuel economy
High-quality construction built for long-lasting durability
Direct-fit replacement compatible with select BMW models
Available from Turner Motorsport, a trusted source for BMW parts

The URO Valvetronic Actuator is a cost-effective replacement that delivers the reliable, high-performance operation BMW owners expect.

Show More Show Less

Oil Filter Cap

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:381079

Part#: 11427525334

In Stock

$ 43.55

This product was last offered at the strikethrough price on
03-09-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Includes sealing o-ring

URO Manifold Absolute Pressure (MAP) Sensor - BMW N54 N20 N26 S55 S63...

For vehicles with a production date from 07/2018+

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:36032311

Part#: 13628644433

In Stock

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54

Show More Show Less

Oil Pan Gasket - Multiple BMWs

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:24145943

Part#: 11137600482

In Stock

$ 25.57 USD

Add to Wish List

Qty

$ 25.57 USD

Add to Wish List

Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.

URO Fuel Pump O-Ring - 16117188567

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:28271184

Part#: 16117188567

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Key Features:

Ensures a perfect fit for your vehicle Instantly restores proper sealing and fuel delivery by replacing the failed fuel pump o-ring Features a direct-fit OE-style design for easy installation and extended durability Crafted from high-quality elastomer material capable of withstanding exposure to corrosive hydrocarbon fuel and intense vehicle heat

Show More Show Less

URO Parts Replacement Valve Cover Assembly - 11127846359

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:29466800

Part#: 11127846359

In Stock

$ 359.94

This product was last offered at the strikethrough price on
07-14-2026

$ 305.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 359.94

This product was last offered at the strikethrough price on
07-14-2026

$ 305.99 USD

Limited Qty Sale

Add to Wish List

A cracked valve cover is often the culprit behind engine oil leaks, as prolonged exposure to extreme temperature fluctuations deteriorates the gaskets, leading to failure. Ensure your engine oil stays where it belongs by replacing your valve cover.

This comprehensive valve cover kit includes all necessary gaskets and hardware for a seamless, hassle-free installation.

Key Benefits:

Perfect Fit: Designed to match OE specifications for a straightforward installation and optimal valvetrain protection. Prevent Leaks: Cracked valve covers can cause problematic vacuum leaks and allow oil to damage engine components. Premium Quality: Made from high-grade metal or plastic materials, this valve cover is corrosion-resistant and can withstand intense engine heat and oil vapor. URO Parts Excellence: With a catalog of over 8,000 premium spare parts, URO Parts specializes in high-precision, durable replacements for factory BMW components. Each part is meticulously evaluated to ensure the perfect balance of durability, functionality, and cost. For top-quality replacement parts that won't break the bank, trust URO Parts.

Show More Show Less

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

T#:22196341

Part#: VTTS55CLCNV

Ships in 10 Business Days

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 6 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

URO Oxygen Sensor - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:38094317

Part#: 11787848482

In Stock

$ 109.25 USD

Add to Wish List

Qty

$ 109.25 USD

Add to Wish List

Located before the catalytic converter on the longer downpipe, also considered the upstream O2 sensor.

Idler Pulley

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:26271781

Part#: 11288673720

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 1-2 days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

T#:5122280

Part#: TRIPLECAPRED1

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

S55 Turbocharger Install Kit

T#:597534

Part#: VTT-S55-INSTL

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Show More Show Less

VTT “GCMAX” Turbocharger Upgrade Kit - BMW S55

T#:14816664

Part#: VTT-S55-GC-1-1

Ships in 10 Business Days

$ 5,512.99 USD

Add to Wish List

Qty

$ 5,512.99 USD

Add to Wish List

VTT is hitting the ground running in 2023 with the F8X platforms. We are proud to introduce our “GCMAX” evolution of our insanely popular and record-holding GC Series of S55 turbocharger upgrades. We took what we learned from those, and take these to the next level! We increased all the internal flow channels, optimized AR ratios, maxed out the inlet size at 2.5', and increased the compressor wheel to 67mm. Last but not least, the biggest difference maker! We had to completely retool our turbine housings to take our 54mm G25 series turbine. This wheel absolutely outflows everything on the market and is what we use on our G8X S58 GC+ and F9X M5/8 GC. This wheel is proven to spool faster and flow more than any other wheel in its size range. This is the KEY to making big power while keeping back pressure down. This same wheel combo has seen 1000WHP on the F9X platforms and has more still on top. This setup, also went 9.44@146 in the G80 with a completely stock motor, and drivetrain. If you are looking to take your F8X to the next level whether built motor or stock without breaking the bank, THIS is the ticket. Don’t mess around with overpriced slow spooling twins, or the hassle of going single, ending up with a laggy car, and hacked-up connections. These bolt-on like FACTORY. A plug, and play 1000WHP option! Key Design Elements: All new castings with larger flow channels, AR Ratio changes, and improved Aero over Current GC/GC+ housings 310 Stainless Steel Turbine housing for the ultimate in heat, and corrosion resistance 54mm G25 Spec 9 blade Superalloy Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 67mm 9-blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next-day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT set “GCMAX” turbochargers 1- VTT set of “GCMAX” Silicone intakes As with any turbocharger upgrade it should be coupled with complimenting upgrades such as fuel system upgrades, intake, downpipe, intercooler, tune, etc. While you will see gains going from stock turbo to a GCMAX with no other changes, to realize the full potential of the upgrade other parts/tune must be added.

Show More Show Less

S55 Cold Side J-Pipe Charge Pipe

T#:597645

Part#: VTT-S55-CHARGE-1

Ships in 10 Business Days

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Replace your plastic OEM charge pipe with the aluminum charge pipe from Vargas Turbo Technologies. Once you start turning up the boost on the S55 the stock charge pipe from the intercooler to the throttle body becomes a ticking time bomb until it explodes leaving your stranded. This Charge pipe is made from mandrel bent aluminum with CNC flange, and 1/8' NPT port for methanol injection.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

S55 Billet Motor Mount Inserts

T#:597677

Part#: VTT-INSERT-2

Ships in 10 Business Days

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.

Show More Show Less

VTT S55 Red Billet CNC Valve Cover

T#:640082

Part#: VTTS55VLVRED

Ships in 6 Business Days

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Replace your plastic valve cover with this red anodized billet aluminum from Vargas Turbo Technologies. VTT created these for the S55 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which can crack with higher mileage. These will work with the stock PCV hose, or an aftermarket catch can, such as the VTT S55 engine catch can kit.

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Vargas S55 "GC" Turbo Upgrade - F8X S55 3.0L

T#:638924

Part#: VTTS55GC

Ships in 10 Business Days

Starting at $ 4,052.99 USD

Add to Wish List

Starting at $ 4,052.99 USD

Add to Wish List

VTT S55 GC Turbochargers. GC stands for “Game Changers” and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single-piece high flow inlet, as well as Vargas' tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock, etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point! WHP Level supported (with proper fuel, upgrades, and tuning): 800WHP S55 GC turbocharger Features: Mar-M246: Every set of GC Turbochargers comes with a Mar-M26 Superalloy turbine wheel for unmatched durability Upgraded thrust: Every set of stage GC turbos comes with a performance upgraded thrust to extend the life of the turbochargers. Billet Compressor wheels: Billet compressor wheels are used to maximize flow per shaft revolution GC+ Compressor option available 15-20% flow increase over Standard Billet GC Wheel The turbine housing is cast from 316 Stainless Steel We also suggest picking up the Turbo Installation Kit. This kit includes: 2 – Exhaust manifold gaskets 20 – Exhaust manifold nuts 2 – Oil Drain Gaskets 2 – Oil drain O-rings 4 – Oil Feed O-rings 6 – Coolant connection O-rings 2 – Turbo to downpipe gaskets 2 – Downpipe to Exhaust gaskets

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT S55 Billet CNC Valve Cover - Black

T#:640081

Part#: VTTS55VLVBLACK

Ships in 10 Business Days

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Replace your plastic valve cover with this black anodized billet aluminum from Vargas Turbo Technologies. VTT created these for the S55 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which can crack with higher mileage. These will work with the stock PCV hose, or an aftermarket catch can, such as the VTT S55 engine catch can kit.

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

VTT N5X/S55/N2X Triple Billet Cap Kit - Blue - BMW N20/52/54/55 ...

T#:5122282

Part#: TRIPLECAPBLUE1

In Stock

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Valve Cover Bolt - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:32781449

Part#: 11129454322

In Stock

$ 9.59 USD

Add to Wish List

Qty

$ 9.59 USD

Add to Wish List

Intake Gasket Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:585910

Part#: 11617547242

In Stock

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Intake gaskets go in between the head and the intake runners. ECS recommends replacing these gaskets when doing removal and re-install of intake manifolds.

URO Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

T#:50031925

Part#: 11128655331

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replaces broken or damaged oil filler cap.

Oil Filter Housing Gasket - Upgraded Rubber

2X Entries For Our G87 M2 Sweepstakes!

T#:598883

Part#: 11427537293

In Stock

$ 11.89 USD

Add to Wish List

Qty

$ 11.89 USD

Add to Wish List

This gasket seals the oil filter housing to the attachment point on the side of the block

Electrical Connector - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:367145

Part#: 61132359999

Ships in 1-3 days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

2 pin used in many locations on late model BMWs

URO Valve Cover Bolt - BMW

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:32781448

Part#: 11127584156

In Stock

Sale - Save 12% $ 9.99

This product was last offered at the strikethrough price on
05-15-2026

$ 8.84 USD

Add to Wish List

Qty

Sale - Save 12%

$ 9.99

This product was last offered at the strikethrough price on
05-15-2026

$ 8.84 USD

Add to Wish List

Replace your stripped or missing valve cover bolt to ensure a tight seal of the valve cover to the cylinder head. Guaranteed fitment Broken valve cover bolts can create troublesome vacuum leaks and allow leaking oil to damage engine components URO valve cover bolts are precisely manufactured to OE dimensions for easy installation and secure attachment Durable high-quality material withstands oil vapor and intense engine heat 24-Month Unlimited Mileage Warranty

Show More Show Less

URO Impulse Sender - Timing Chain Sprocket - N52, N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:6795782

Part#: 11367578877

Ships in 1 Business Day

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

The impulse sending wheel is used to send timing information to the cam sensor to ensure your VANOS timing is correct. Replace your damaged or stripped impulse sending wheel with a quality URO part.

Intake Manifold Gasket

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:641260

Part#: 11617588624

Ships in 1 Business Day

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

URO Variable Timing Solenoid Seal / O-Ring

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:37892094

Part#: 11367561852

Ships in 1 Business Day

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

URO Variable Timing Solenoid Seal / O-Ring

URO Variable Timing Solenoid Seal / O-Ring is a direct replacement designed to eliminate oil leaks caused by worn or cracked original seals in BMW engines. Engineered for durability, this high-quality O-ring withstands extreme engine heat and continuous oil exposure, ensuring a long-lasting and reliable seal.

Instantly resolves troublesome oil leaks by replacing worn or hardened OE seals
Direct-fit design allows for easy installation without modifications
Manufactured from high-quality materials to resist cracking and deterioration from heat and oil exposure
Ensures proper sealing of the variable timing solenoid for optimal engine performance
Backed by a 24-month unlimited mileage warranty for reliability and peace of mind

The URO Variable Timing Solenoid Seal / O-Ring is a cost-effective solution to maintain peak engine efficiency and prevent potential oil leaks in BMW vehicles.

Show More Show Less