Showing 7420 results for ""

Amplify your driving experience with heightened turbo/induction sound, along with increased air flow, throttle response, and overall performance.

Discover a whole new driving experience, complete with captivating induction sounds, heightened throttle response, and noises you have not yet heard from your turbo. Unleash the full potential of your turbo and engine by ditching the restrictive enclosed intake box. The factory intake is no match for your N55 paired with the Luft-Technik Intak Intake.

It is important to highlight the distinctive dual-cone filter design, featuring a standard conical shape with a smaller inverted cone in the center. This configuration produces an exhilarating sound when lifting off the throttle. The airflow pattern as air exits the filter creates a unique turbo flutter sound, adding to the excitement of the driving experience.

The stock intake box, often labeled as a muffler/silencer, is engineered to dampen induction noise for a more refined ride. However, as enthusiasts, we crave the exhilarating sound of our induction as we accelerate. Our ECS intake is tailored for enthusiasts who seek a heightened driving experience. Crafted with function in mind, it features a silicone coupler, rotomolded inlet tube, heat shield, and filter, seamlessly integrating with the OE fresh air scoop and utilizing stock mounting locations. Experience enhanced performance and a renewed passion for driving with the ECS Luft-Technik Intake for your N55.

Key benefits:

Increased induction noise
Enhanced throttle response
+7 WHP / +14 FT-LBS TQ(peak gains) and +12 WHP / +15 FT-LBS (max gains)
Free-flowing for decreased strain on the turbo
Unique sounds from the dual-cone filter
Factory MAF scaling
Mounts to factory locations
Online installation instructions
Design:

Durable, lightweight 5052 heat-shield, finished in wrinkle black powder coat
4 Ply silicone coupler
Billet aluminum MAF flange
Rotomolded intake tube with smooth internal tubing for uninterrupted flow
Installs in front of the factory cold air duct
Kit Contents:

Silicone turbo coupler
Rotomolded inlet tube
Powder coated heatshield
Dual cone filter
Seals, clamps and hardware for installation

• 60MM, 75MM, 82MM, OR 90MM OVERALL LENGTH
• EASY INSTALL WITH ALLEN SOCKET
• CERTIFIED ISO/TS 16949 AND ISO 9001 BY TUV
• MANUFACTURED IN EUROPE
• BLACK M-PHOSPHATE COATING
• CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
• STUD FOR MIXED STREET/TRACK USE

• Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
  
  Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
  
  Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.
   Turner Bullet Nose Wheel Stud Features:

• Black phosphorous corrosion resistant coating
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel
• Installation Instructions
  Click here for installation instructions and more information.
  
  
  
  Sold per stud.

Water Pump And Thermostat Kit - BMW N55 F Chassis

Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.

This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.

Signs Your Water Pump and Thermostat May Need Replacement:

• Engine overheating or failing to reach operating temperature
• Water pump running intermittently or erratically
• Cooling fans operating at maximum output
• Engine fault codes, including 20A804

Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.

BMW F87 M2 DO88 Racing Oil Cooler is designed to significantly enhance engine cooling performance. Featuring a 134% larger core volume, 84% increased cooling area, and a 25% higher oil capacity, this high-performance oil cooler delivers superior cooling efficiency. Engineered for both track and road use, the DO88 Racing Oil Cooler ensures optimal performance without compromising on quality.

• Increased Core Volume: 134% larger core volume for improved cooling capacity.
• Expanded Cooling Area: 84% larger cooling area for enhanced heat dissipation.
• Higher Oil Volume: 25% increased oil volume to maintain optimal temperatures.
• Track and Road Ready: Built to handle high-performance demands on and off the track.
• Top-Quality Engineering: Designed by DO88 for maximum durability and efficiency.

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)