BMW Engine Parts for BMW F87 M2 N55 3.0L

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.

Product Benefits:

Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of six for complete BMW Cooper replacement

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

• 3" Blade MINI Awl, 90°, Hook, and Curve
• 6" Blade Awl, 90°, Hook, and Curve
• 6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

F87 M2 N55 Race-Inspired Catback Exhaust System

Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.

BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.

Engineered for Power and Flow

Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.

Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits

Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes

3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils

For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.

Features and Benefits

Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade

Upgrade the sound of your BMW or MINI with the Hella Horn - High-Tone. This high-quality horn delivers a powerful and attention-grabbing sound, enhancing safety on the road. Designed for easy installation, it provides a quick and effective way to improve the audible presence of your vehicle.

• Powerful and attention-grabbing sound
• Enhances safety on the road
• Easy installation for convenience
• Compatible with BMW and MINI models
• High-quality construction for durability

Enhance the audible presence of your BMW or MINI with the Hella Horn - High-Tone, ensuring you're heard when it matters most.