BMW Intake Parts for BMW F87 M2 N55 3.0L

Turner Motorsport - Open Carbon Intake - F87 M2, F22, F30, F32 (N55) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:568168

Part#: 023661TMS16

In Stock

Sale - Save 10% $ 784.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 706.49 USD

Add to Wish List

Sale - Save 10%

$ 784.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 706.49 USD

Add to Wish List

We are proud to present you with our long-awaited Turner Motorsport Carbon Fiber N55 Intakes. Like all of our Turner Motorsport products, our N55 intake was CAD Designed in-house to give you the best performing, most beautiful intake we could possibly imagine for your N55 powered BMW. The best part? Our design seamlessly integrates with OEM ducting and stock mounting locations to give you a simple install and an OEM+ fit and finish. We believe this is the way the N55 engine bays should have come from the factory. It’s time to ditch all that plastic. Our higher flow filter and intake design gave our F30 335i an additional 7 WHP and 14 ft-lbs of torque over stock when we tested on our dyno. Our less restrictive intake design reduced post filter pressure by 0.2 psi over stock, allowing for gains across the entire RPM range - this reduced pressure drop also results in less stress on your N55’s turbo. We offer our N55 carbon intake in either gloss or matte finish, so you can choose what best suits your engine bay. Select either gloss or matte finish below, and then please select whether or not you are purchasing an intake for a manual transmission vehicle. If your vehicle has a manual transmission, it will require BMW Part # 13907515387. If you are looking for our Turner Motorsport Enclosed Carbon Intake, see T#568148. Note that we only offer Open intakes for F87 M2. Download PDF Installation Instructions Key Features & Benefits: 2x2 twill weave carbon fiber, clear coated for UV protection Wrinkle Black Powder Coated heat shield Ovaled Intake tube for OEM quality fitment High flow cleanable Turner Motorsport air filter Peak gains of +7 WHP / +14 lb-ft of torque (with max gains of +12 WHP / +15 WTQ) Special care instructions: If clear coat gets scratched, reseal affected area with clear coat touch up To retain UV resistance and protect finish, wax with high quality carnuba wax Our N55 Carbon Intake fits the following BMWs: 2016+ F87 M2 *WILL NOT FIT M2 CS (N55 only) 2014 - 2016 F22 M235i, M235i xDrive 2012 - 2015 F30 335i, 335i xDrive 2012 - 2015 F32 435i, 435i xDrive Want more in-depth details? We’ve got you covered below: Carbon Fiber Intake Tube: 2x2 twill weave carbon fiber, protected by a clear coat for UV protection Ovaled intake tube design allowing for ideal cross-sectional area and optimal flow MAF scaling matches factory intake MAF sensor flange machined from 6061-T6, black anodized and bonded to the intake tube directly in the center of the tube for accurate temp/airflow reading Vacuum line port machined from 6061-T6, black andozed and bonded to intake tube Integrated carbon flange allows secure mounting of intake tube to our heat shield Heat shield: One piece design manufactured from 12 gauge 5052 aluminum Wrinkle black powder coated Supplied gold heat shield tape High Flow Air Filter: Conical high flow cleanable air filer 8 ply oiled cotton gauze Bellmouth filter flange inlet reduces turbulence and maximizes flow

Show More Show Less

Upgraded N55 Silicone/Aluminum Turbo Inlet Hose Kit - F Chassis N55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:639115

Part#: 028145TMS09KT

In Stock

Sale - Save 20% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 249.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 249.99 USD

Add to Wish List

Owning a BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N55 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport F-Chassis N55 Upper Silicone & Lower Cast Aluminum Turbo Inlet Hoses!

Show More Show Less

Turner Charge Pipe Upgrade Kit - F22/23 F3X F87 N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
10X Entries For Our Spin To Win Sweepstakes!

T#:584163

Part#: 024592TMS01KT

In Stock

Sale - Save 25% $ 353.99

This product was last offered at the strikethrough price on
06-14-2026

$ 265.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 353.99

This product was last offered at the strikethrough price on
06-14-2026

$ 265.49 USD

Add to Wish List

The N55 OE charge pipe is prone to failure; after all it is plastic. With constant heat cycling, the factory plastic becomes very brittle over time, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner N55 Charge pipe for increased air flow, throttle response, and reliability. You can safely and reliably turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Upper & Lower Charge Pipe 6061-T6 Aluminum construction for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment. Billet CNC throttle body flange for OEM fitment Mandrel bent 2.85” tubing (larger than stock) for improved airflow and increased performance. Black powder coated for exceptional durability and corrosion resistance. 4-ply reinforced silicone hose and 6061-T6 powder coated aluminum coupler to retain factory fitment to intercooler. Silicone provides a smooth transition from intercooler outlet to throttle body diameter to maximize flow and volumetric efficiency NOTE: C-Clip is not included and must be re-used or purchased new!

Show More Show Less

Turner Turbo Boost Pipe Upgrade - F22/23 F3X F87 N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584162

Part#: 024592TMS03KT

Ships on Sep 29, 2026

Sale - Save 25% $ 203.99

This product was last offered at the strikethrough price on
06-14-2026

$ 152.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 203.99

This product was last offered at the strikethrough price on
06-14-2026

$ 152.99 USD

Add to Wish List

The N55 OE boost pipe is often prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE boost pipe has also been proven to break once under increased boost pressure. Replace the weak OE boost pipe with the new Turner N55 Boost Pipe for increased air flow, increased throttle response, and increased reliability. You can also safely turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Turbo Outlet Boost Pipe (AKA "Hot Side Charge Pipe") 4-ply reinforced silicone for increased durability over the factory rubber hose. 6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

Turner Complete Charge Pipe Upgrade Kit - F22/23 F3X F87 N55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
10X Entries For Our Spin To Win Sweepstakes!

T#:584164

Part#: 024592TMS09KT

Ships on Sep 29, 2026

Sale - Save 25% $ 479.99

This product was last offered at the strikethrough price on
06-14-2026

$ 359.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 479.99

This product was last offered at the strikethrough price on
06-14-2026

$ 359.99 USD

Add to Wish List

Huge upgrade to brittle factory plastic pipes that are prone to failure.

Turner Motorsport Stepped Intercooler - F2x F3x 228i 235i 328i 335i 4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:557526

Part#: 024703TMS02

In Stock

Sale - Save 20% $ 744.99

This product was last offered at the strikethrough price on
06-14-2026

$ 595.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 744.99

This product was last offered at the strikethrough price on
06-14-2026

$ 595.99 USD

Add to Wish List

Engines make more power when you're able to move as much air and fuel as possible through them. However, air density is just as important as air volume. Cooler air is denser air, so in addition to keeping your engine cool, it's important to make sure that your intake charge is as cool as possible. Turner Motorsport's upgraded intercooler works to reduce air temperatures with a bare minimum of pressure drop. Less pressure drop means less restriction, and a turbocharger that doesn't have to work as hard. This results not only in a longer service life for your turbocharger, but a substantial increase in performance as well.

The stepped design increases volume and surface are in a limited space by adding an additional smaller core at the top of the intercooler. Both cross sectional area and frontal surface area are increased by a whopping 56%, with a design that still weighs under 20 pounds. On the stock intercooler, the temperature differential between the inlet and outlet sides of the intercooler represented a 95 degree drop. With the Turner Motorsport intercooler, that drop was increased to a chilling 140 degrees. The dyno results don't lie: as a bolt-in upgrade, expect gains of 18 wheel horsepower and 10 lb/ft of torque. With a tune and supporting modifications, further gains are possible, up to 36 horsepower and 28 lb/ft of torque.

This cast aluminum intercooler features an attractive, easy to clean matte black finish, with etched Turner logos on the front and bottom. If you're looking for the ultimate cooling system upgrade for your turbo BMW, look no further.

Cast aluminum construction
Bar and plate design
56% increase in frontal surface area & cross sectional area
Decrease in temperature of 45 degrees from inlet side to outlet side (95 degree drop stock on outlet side vs. 140 degree drop on Turner outlet side)
Significantly less restriction (pressure drop of consistently 0.75 psi vs. 1.5-2.5 psi stock)
+18HP/10TQ (+36HP/28TQ with tune and supporting mods)
Weighs under 20 lbs.
Overall size: 520mm wide, 210mm tall
Mounting hardware inlcuded

Upgrade to the following OE Intercoolers: 17517600531, 17517600530, 17517618809

Fits the Following BMWs:

F22 F23 228i 228i M235i M235ix

F30 F31 F32 F33 F34 F36 328i 328ix 335i 335ix 428i 428ix 435i 435ix

Show More Show Less

F22/23 F3x Turner Motorsport Charge Pipes & Intercooler Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599060

Part#: 024592TMS09KT2

Ships on Sep 29, 2026

Sale - Save 20% $ 1,262.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,010.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 1,262.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,010.39 USD

Add to Wish List

The N55 OE charge pipe is prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner Motorsport N55 Charge pipe for increased air flow, and increased throttle response. You can also safely turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. The perfect compliment to the increased airflow form the Turner Motorsport charge pipes is a intercooler. Turner Motorsport has developed an intercooler upgrade that is far superior to the stock unit. Constructed from cast aluminum with a bar and plate design, this intercooler increases both cross sectional area and frontal surface area by 56%. This increase in area has shown a 45 degree decrees in intake temperature resulting in 18 wheel horsepower and 10 lb/ft of torque on its own.

Show More Show Less

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CARB certified for sale in all 50 states

T#:637356

Part#: MMHE-F80-15

EO#: D-759-13

In Stock

$ 725.99 USD

Add to Wish List

Qty

$ 725.99 USD

Add to Wish List

Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Carbon Corner Braces & N55 Carbon Open Intake

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590895

Part#: 028148TMS11KTKT

Ships in 6 Business Days

Sale - Save 20% $ 1,901.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,521.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 1,901.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,521.59 USD

Add to Wish List

Mishimoto High Performance Intercooler - Black - F22/23 F3X F87 N20 N...

Requires slight modification to the front core support brace for proper fitment

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588087

Part#: MMINT-F30-12BK

Ships in 3 Business Days

$ 887.99 USD

Add to Wish List

Qty

$ 887.99 USD

Add to Wish List

Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune. Mishimoto is here to unlock the full potential of your N20/26 and N55 engines withtheir Performance Intercooler specifically designed for the F22/F30 chassis. Their unique 6” thick step-core design adds a 115° angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as Mishimoto engineered their intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop. Coupled together, their features were able to drop intercooler outlet temperatures by 45°F, and add 10 whp and 8 wtq all on the stock tune of a 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty. Features & Specifications: Direct fit for the 2012-2016 BMW F22/F30 Chassis Patent Pending 6” thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers Max power gains of 10 whp and 8 wtq on stock tuning Drops intercooler outlet temperature by 45°F on stock tuning Optimal core design for maximum cooling efficiency with minimal pressure drop Intercooler core volume increased by 96% External fin surface area increased by 130% Header plate includes shroud specifically designed to seal against curved factory crash beam Retains factory quick-disconnect fittings for compatibility with stock piping Available in silver or black Mishimoto Lifetime Warranty INSTALLATION INSTRUCTIONS WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25241773

Part#: MMCP-3035B

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

Mishimoto High Performance Intercooler - Silver - F22/23 F3X F87 N20 ...

Requires slight modification to the front core support brace for proper fitment

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588088

Part#: MMINT-F30-12SL

Ships in 3 Business Days

$ 887.99 USD

Add to Wish List

Qty

$ 887.99 USD

Add to Wish List

Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune. Mishimoto is here to unlock the full potential of your N20/26 and N55 engines withtheir Performance Intercooler specifically designed for the F22/F30 chassis. Their unique 6” thick step-core design adds a 115° angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as Mishimoto engineered their intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop. Coupled together, their features were able to drop intercooler outlet temperatures by 45°F, and add 10 whp and 8 wtq all on the stock tune of a 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty. Features & Specifications: Direct fit for the 2012-2016 BMW F22/F30 Chassis Patent Pending 6” thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers Max power gains of 10 whp and 8 wtq on stock tuning Drops intercooler outlet temperature by 45°F on stock tuning Optimal core design for maximum cooling efficiency with minimal pressure drop Intercooler core volume increased by 96% External fin surface area increased by 130% Header plate includes shroud specifically designed to seal against curved factory crash beam Retains factory quick-disconnect fittings for compatibility with stock piping Available in silver or black Mishimoto Lifetime Warranty INSTALLATION INSTRUCTIONS WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F87 M2 N55 3.0L

Sub-Categories

Turner Motorsport - Open Carbon Intake - F87 M2, F22, F30, F32 (N55) ...

Upgraded N55 Silicone/Aluminum Turbo Inlet Hose Kit - F Chassis N55 ...

Turner Charge Pipe Upgrade Kit - F22/23 F3X F87 N55

Turner Turbo Boost Pipe Upgrade - F22/23 F3X F87 N55

Turner Complete Charge Pipe Upgrade Kit - F22/23 F3X F87 N55 ...

Turner Motorsport Stepped Intercooler - F2x F3x 228i 235i 328i 335i 4...

F22/23 F3x Turner Motorsport Charge Pipes & Intercooler Kit

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

Carbon Corner Braces & N55 Carbon Open Intake

Mishimoto High Performance Intercooler - Black - F22/23 F3X F87 N20 N...

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

Mishimoto High Performance Intercooler - Silver - F22/23 F3X F87 N20 ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results