MMINT-F30-12BK - Mishimoto High Performance Intercooler - Black - F22/23 F3X F87 N20 N47 N55
Mishimoto High Performance Intercooler - Black - F22/23 F3X F87 N20 N47 N55
Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune.
Mishimoto is here to unlock the full potential of your N20/26 and N55 engines withtheir Performance Intercooler specifically designed for the F22/F30 chassis. Their unique 6” thick step-core design adds a 115° angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as Mishimoto engineered their intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop.
Coupled together, their features were able to drop intercooler outlet temperatures by 45°F, and add 10 whp and 8 wtq all on the stock tune of a 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty.
Features & Specifications:
Direct fit for the 2012-2016 BMW F22/F30 Chassis
Patent Pending
6” thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers
Max power gains of 10 whp and 8 wtq on stock tuning
Drops intercooler outlet temperature by 45°F on stock tuning
Optimal core design for maximum cooling efficiency with minimal pressure drop
Intercooler core volume increased by 96%
External fin surface area increased by 130%
Header plate includes shroud specifically designed to seal against curved factory crash beam
Retains factory quick-disconnect fittings for compatibility with stock piping
Available in silver or black
Mishimoto Lifetime Warranty
INSTALLATION INSTRUCTIONS
WARNING! Prop 65 may apply to this product.
Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California.
Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.
For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune.
Mishimoto is here to unlock the full potential of your N20/26 and N55 engines withtheir Performance Intercooler specifically designed for the F22/F30 chassis. Their unique 6” thick step-core design adds a 115° angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as Mishimoto engineered their intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop.
Coupled together, their features were able to drop intercooler outlet temperatures by 45°F, and add 10 whp and 8 wtq all on the stock tune of a 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty.
Features & Specifications:
Direct fit for the 2012-2016 BMW F22/F30 Chassis
Patent Pending
6” thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers
Max power gains of 10 whp and 8 wtq on stock tuning
Drops intercooler outlet temperature by 45°F on stock tuning
Optimal core design for maximum cooling efficiency with minimal pressure drop
Intercooler core volume increased by 96%
External fin surface area increased by 130%
Header plate includes shroud specifically designed to seal against curved factory crash beam
Retains factory quick-disconnect fittings for compatibility with stock piping
Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.
For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.
Prop 65 Warning
Cross Reference
MMINT-F30-12BK
Product Q&A
Lifetime Replacement
This Product Is Covered By Our Lifetime Replacement Program
Products protected by our Lifetime Replacement Program are covered for as long as you own the product, no need to worry about an expiration date. Purchase your products and enjoy some worry-free motoring, knowing we've got you covered.
If you have any questions, would like to learn more or are ready to place a replacement claim, click here!
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
Special Fitment Notes
BMW
F22
228i
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F22
228i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F22
M235i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F22
M235i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F23
228i
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F23
228i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F23
M235i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F23
M235i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F30
320i
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F30
320i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F30
328d
N47 2.0L
Use vehicle selector to confirm fitment
BMW
F30
328d xDrive
N47 2.0L
Use vehicle selector to confirm fitment
BMW
F30
328i
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F30
328i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F30
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F30
335i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F31
328d xDrive
N47 2.0L
Use vehicle selector to confirm fitment
BMW
F31
328i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F32
428i
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F32
428i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F32
435i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F32
435i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F33
428i
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F33
428i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F33
435i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F33
435i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F34
328i xDrive
N20 2.0L
Use vehicle selector to confirm fitment
BMW
F34
335i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F87
M2
N55 3.0L
Requires slight modification to the front core support brace for proper fitment
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.