Schwaben for BMW F93 M8 S63 4.4L

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 30mm 12-point socket
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome vanadium steel

• E36 3 series (1992-1999) -- no M3
• E46 323/325 (1999-2005) -- no 330/M3

The Schwaben 10 Piece 10mm Master Socket Set is a comprehensive socket solution brimming with robust 1/4 inch and 3/8 inch 10mm sockets, all neatly arranged on a single, convenient rail. Meticulously fashioned from premium chrome vanadium steel, this set is thoughtfully curated with your needs in mind, ensuring you always have the most sought-after socket sizes within arm's reach, regardless of their mysterious disappearance into the depths of your garage. And with our unparalleled LIFETIME REPLACEMENT program, rest assured this set will remain your steadfast companion, enduring even the toughest challenges.

Included in the Set:

• Twistable Socket Rail
• 1/4-inch Drive 6 Point Shallow Socket
• 1/4-inch Drive 6 Point Deep Socket
• 1/4-inch Drive 6 Point Impact Shallow Socket
• 1/4-inch Drive 6 Point Impact Deep Socket
• 1/4-inch Drive 6 Point Flex Socket
• 3/8-inch Drive 6 Point Shallow Socket
• 3/8-inch Drive 12 Point Deep Socket
• 3/8-inch Drive 6 Point Impact Shallow Socket
• 3/8-inch Drive 6 Point Impact Deep Socket
• 3/8-inch Drive 6 Point Flex Socket

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

• This specially made socket features 17mm male hex on one end and 17mm socket on the other
• Works to extend reach between wrench and lug nut
• Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.

Many BMWs, especially older models, feature pinch welds where the floor pan meets the rocker. These run from wheel-well-to-wheel-well and are an especially appealing jacking location with one shortfall - jacking on an unprotected pinch weld will frequently cause an unsightly bent and damaged weld. This damage is a quick to rust spot, being located on the lowest point of the vehicle and no longer being covered by protective ecoat, paint, or undercoat.

This Schwaben Pinch Weld Protector is designed to fit between any floor jack cradle and bottom of vehicle. It features a specially designed slot to straddle pinch welds, keeping jack from crushing or bending the pinch weld. The bottom side of protector is designed to fit any jack as well as the Schwaben (T#363164) aluminum jack stands. 

Extruded and designed in USA. Pad is 3" wide & 1" tall.

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 30mm 12-point socket
• Specially hardened to take the added abuse from a impact gun
• Coated for added protection and so you can tell it apart from non impact rated sockets
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome moly steel

The Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set comprises two dozen 1/2-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket
• 21 mm - deep and standard socket
• 22 mm - deep and standard socket
• 24 mm - deep and standard socket

Secure your load with confidence using the Schwaben Ratchet Tie Down Set. Designed for strength, reliability, and ease of use, this 4-piece set is most useful for transporting vehicles, tools, equipment, and more. Each strap is constructed from durable, weather-resistant webbing with reinforced stitching and high-quality ratcheting mechanisms for a firm, non-slip hold.

With a 400 lb working load capacity and a 1200 lb breaking strength, these straps deliver dependable performance for both professional and recreational use. At 1" wide and 15' long, each tie-down offers ample reach and tensioning flexibility to accommodate a variety of securing needs.

FEATURES

Set includes four (4) ratchet tie-down straps 400 lb working load capacity for reliable everyday use 1200 lb breaking strength for maximum durability and safety 1" x 15' heavy-duty webbing provides secure tension and long reach Weather-resistant polyester straps withstand the elements Ergonomic ratchet handles for smooth tightening and quick release

Schwaben has a solution to those hard to reach hose clamps with 8mm hex nuts. This 8mm driver features an overall length of 10-1/2" and a flex shaft length of 6". The ergonomic handle features a non-slip grip for when your hands are oily or wet.

8mm/ 5/16" are commonly found on aftermarket hose clamps. 

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.
• Dual piston's for 5 pump full extension

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

Makes those hard to reach hose clamps much easier to loosen up.

Features:

• 7mm driver
• 6"  flex shaft
• Overall length of 10-1/2"
• No-slip grip resistant to wet or oil coated hands