BMW Tools & Specialty Equipment for BMW X5 M S63 4.4L

Wheel Lock Removal Set - for OEM BMW wheels

T#:5175718

Part#: AGA-WLRT

In Stock

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

Easily removed wheel locks that are stripped or the key cannot be found.

Drive Shaft Wrench

T#:5189118

Part#: AGA-DSW-50

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This tool is a must to properly disconnect the driveshaft.

QuickJack SUV & Light Truck Adapter Set - BL-5000 & BL-7000 Series ...

T#:403120

Part#: 5150561

Ships in 4 Business Days

$ 236.00 USD

Add to Wish List

Qty

$ 236.00 USD

Add to Wish List

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

Low‐profile round polyurethane contact pads - Qty: 4
Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters - Qty: 4
3" stackable adapters. - Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.

Show More Show Less

QuickJack Short Rubber Contact Block Set

T#:403116

Part#: 5300861

Ships in 4 Business Days

$ 76.00 USD

Add to Wish List

Qty

$ 76.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 6.5" long x 1.5" tall x 4" wide

Show More Show Less

Drive Shaft Holder

T#:5175755

Part#: AGA-DSH-40

Ships in 7 Business Days

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Now removing the driveshaft can be a single man job!

Carista Bluetooth OBD2 Adapter - BMW & Mini

This application supports advanced diagnostics, customizations

T#:391453

Part#: COBD-BT24

Ships in 1-2 days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Carista is a smartphone application for both iOS and Android devices that allows owners to diagnose vehicle faults, reset service indicators, and customize vehicle systems without any complicated coding. In order to use Carista on your vehicle, only three things are required: An iPhone, iPad, or iPod touch running iOS 8.0 or later OR an Android device running Android 2.3 and up The Carista OBD2 App: Available on the Apple AppStore and Google Play Bluetooth OBD2 Adapter: Available HERE! Uses Bluetooth 4LE which prevents drainage to the car's battery due to it's power saving mode. Since the adapter is Bluetooth, the Wi-Fi connection on your mobile device remains open so you can still browse the internet while still remaining connected to the vehicle. The Carista Bluetooth OBD2 Adapter is also compatible with the OBD Fusion app on iOS and Android. Diagnose (OBD2): Carista can check your vehicle's health and report any faults stored in its computers. You can also clear any fault codes and reset your "check engine" light, as emissions test readiness. This is a FREE feature. Diagnose (Manufacturer-Specific): Unlike regular OBD2 apps, Carista also gives you access to advanced manufacturer-specific diagnostics, including computers like ABS, airbag, navigation, etc. and gives you the ability to reset your airbag light, ABS light, traction control light, etc. Manufacturer-Specific Diagnosis is a PAID feature; supported vehicles only. Customization: Carista gives you the power to personalize the behavior of your car’s windows, lights, instruments and more, with a click of a button. Customization is a PAID feature; supported vehicles only. Service: With Carista’s DIY tools, resetting your oil service indicator, servicing your electronic parking brake or checking your launch control count becomes a 1-click action. This is a PAID feature; supported vehicles only. Pricing: All PAID features listed above are available with an in-app purchase of Pro functionality: complimentary 1 month trial included, annual subscriptions are $39.99/year.

Show More Show Less

BMW E60 M5 Crank Case Test Cap

T#:6924319

Part#: AGA-6061-TC

Ships in 7 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

Show More Show Less

Brake Pressure Bleeder

T#:5189146

Part#: AGA-BPB-1000

Ships in 7 Business Days

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Make bleeding brakes a one man job!

AGA Tools Oil Drain Plug Repair Kit

T#:5484733

Part#: AGA-ODP-12-14-K

Ships in 7 Business Days

$ 895.99 USD

Add to Wish List

Qty

$ 895.99 USD

Add to Wish List

Using the AGA Drain Plug Repair Kit will allow you to repair the stripped drain plug without having to remove the oil pan.

Urethane Pinch-Weld Puck - 3" Diameter - Set Of 4

T#:840366

Part#: 5300011

Ships in 4 Business Days

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Round pinch-weld pucks are specifically designed to handle even more difficult-to-reach pinch-weld rails, while protecting your car.

Jack Rod Stand

T#:5175707

Part#: AGA-JR-8-14

Ships in 7 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Turn a tradition jack into a jack stand as well.

QuickJack 6000ELX Super-Long - 6,000 Lb. Capacity - 110 Volt (60Hz) ...

SAVE $300 IN SHIPPING!

T#:3643614

Part#: 6000ELX

Ships in 4 Business Days

Starting at $ 2,694.00 USD

Add to Wish List

Starting at $ 2,694.00 USD

Add to Wish List

The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.

Show More Show Less

Hex Low Profile Service Sockets

T#:5175654

Part#: AGA-SS-8-14-K

Ships in 7 Business Days

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

Due to minimal clearance, it’s difficult to get a hex socket in the gaps to remove plugs on rear differentials, transfer case and other engine drain/fill plugs.

Urethane Pinch-Weld Block - 3x3x2.5" - Set Of Four

T#:840364

Part#: 5300013

Ships in 4 Business Days

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

Specially formulated urethane rubber for durability
Deep bilateral slots accommodate virtually all pinch weld frames
Versatile positioning: lengthwise or crosswise
Water, chemical resistant, and 100% weatherproof
Single-piece construction ensures a superior hold
Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

Show More Show Less

Torque Wrench Adapter

T#:5189117

Part#: AGA-STA

Ships in 7 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Easily torque your driveshaft to specifications.

TL/SLX Frame Extensions - Pair

T#:1965125

Part#: 5620291

Ships in 4 Business Days

$ 410.00 USD

Add to Wish List

Qty

$ 410.00 USD

Add to Wish List

Increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches

Valve stem seal pliers

T#:5189207

Part#: AGA-SRP-N63

Ships in 7 Business Days

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

AGA Tools has manufactured custom pliers to make the removal and installation of valve stem seals quick and easy for any engine.

QuickJack 8000TL Vehicle Lift Package - 110 Volt (60Hz)

T#:40714793

Part#: 5176009

Ships in 4 Business Days

$ 2,450.00 USD

Add to Wish List

Qty

$ 2,450.00 USD

Add to Wish List

This QuickJack package deal includes the 8000TL vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). See full listing for more details!

QuickJack Medium Rubber Contact Block Set

T#:403117

Part#: 5300863

Ships in 4 Business Days

$ 86.00 USD

Add to Wish List

Qty

$ 86.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide

Show More Show Less

QuickJack 8000TLX Extended Vehicle Lift Package - 110 Volt (60Hz) ...

T#:40342807

Part#: 5176113

Ships in 4 Business Days

$ 2,500.00 USD

Add to Wish List

Qty

$ 2,500.00 USD

Add to Wish List

This QuickJack package deal includes the 8000TLX extended vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). The 8000TLX extended vehicle lift has a maximum lifting capacity of 8,000-lb. It is the highly anticipated sequel to QuickJack's beloved 7000TLX. With the ability to lift an extra 3-inches, the 8000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000 lbs. The longer frames and 66" lift point make this kit perfect for larger SUVs and trucks. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, it also requires the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. Through superior engineering and design, QuickJack has been able to produce an extra 3-inches of lifting height without sacrificing the overall dimensions that have made QuickJack a must-have in your garage. 8000TLX still has an impressive 3.5" lowered height, 76" overall length, and 12.5" overall width. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.

Show More Show Less

AGA Tools Slide Hammer

T#:5269509

Part#: AGA-WLRT-SH

Ships in 7 Business Days

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Easily remove those stubborn bearings or dents from your car.

Long QuickJack Hydraulic Hose - Priced Each

T#:403155

Part#: 5570216

In Stock

$ 56.00 USD

Add to Wish List

Qty

$ 56.00 USD

Add to Wish List

Replacement long hydraulic hose - 2 required

QuickJack Tall Rubber Contact Block Set

T#:403118

Part#: 5300862

Ships in 4 Business Days

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide

Show More Show Less

QuickJack BL-3500SLX - 3,500 Lb. Capacity - 110 Volt (60Hz)

Please confirm compatibility with vehicle using the "Measuring Guide Worksheet" under the "Installation" tab prior to ordering.

T#:403178

Part#: BL-3500SLX

Ships in 4 Business Days

Starting at $ 1,925.00 USD

Add to Wish List

Starting at $ 1,925.00 USD

Add to Wish List

The BL-3500SLX has a maximum lifting capacity of 3,500-lb. But its true strength is that you can take it with you. The QuickJack is so light-weight and space-efficient that you can transport it in your regular sized trunk or backseat. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Show More Show Less