BMW Tools & Specialty Equipment for BMW X5 M S63 4.4L

3pc Line Clamp Set

T#:1855993

Part#: W83205

Ships in 1 Business Day

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Heat resistant reinforced nylon construction.

Copper RTV Sealant - 3oz

T#:3629265

Part#: 81878

Ships in 1 Business Day

$ 12.70 USD

Add to Wish List

Qty

$ 12.70 USD

Add to Wish List

Highest operating temperatures for 4-cylinder, turbocharged or high-performance engines

Seal Puller

T#:1809137

Part#: W1219

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Leverage works for you.

AGA Tools 8HP Park Release Tool

T#:26404886

Part#: AGA-8HP-PRT

Ships in 7 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

6 Piece Twisted Wire Bore Brush Set

T#:3729817

Part#: IPA8080

Ships in 4 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Clean bores and rusty holes with this brush set

SHOCKWAVE 3PC Impact Socket Adapter Set

T#:5901259

Part#: 48-32-5033

Special Order: No Guaranteed ETA

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Our 3 Piece SHOCKWAVE Impact Hex Shank Socket Adapter Set is engineered for extreme durability and up to 30X life.

16 Piece Punch & Chisel Set

T#:5691151

Part#: AST1600

Ships in 6 Business Days

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

Cut, drive and punch.

6-Ton Jack Stands - Pair

T#:386187

Part#: 1006D

Ships in 6 Business Days

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

These jack stands have steel base pads for superior stability

Permatex Liquid Metal Filler

T#:2958747

Part#: 25909

Ships in 1 Business Day

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Easy-to-use filler can be drilled, filed, sanded and painted. Forms a long-lasting, metal-tough bond.

Disc Brake Piston "Cube"

T#:8138613

Part#: W80621

Ships in 1 Business Day

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

For relining rear disc brakes by rotating pistons back into brake calipers when replacing pads Features: 5 drive pin configurations fit most applications Use with 3/8" drive tools

Long Needle Nose Pliers 4 Pc. Set

T#:3672453

Part#: ATD814

Ships in 6 Business Days

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

Don't come up short, these long needle nose pliers can get you out of a jam.

Permatex Silicone Spray Lubricant

T#:2928951

Part#: 80070

Ships in 1 Business Day

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Lubricates and waterproofs all types of mechanical equipment

Protective Wheel Saver Socket - 17mm

T#:31390606

Part#: PROWHEELSOCKET17

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Protective Wheel Saver Socket - 17mm is designed to safeguard your valuable rims from damage during removal and installation. Featuring a synthetic polymer sleeve and insert, this socket ensures that your rims remain free from scratches or signs of wear while unscrewing and tightening lugs.

Protects Wheels: The synthetic polymer sleeve and insert protect both factory and aftermarket wheels from scratches and damage.
Versatile Use: Suitable for painted, clear-coated, chrome, factory, and other wheel finishes.
Durable Construction: The six-point design and large contact surfaces help distribute stress and prevent damage.
Wide Compatibility: Fits all 1/2" drive sockets, tools, and air tools, making it ideal for home use as well as rugged enough for professional shop use.
Corrosion-Resistant: Made from heavy-duty materials that resist rust and corrosion, ensuring longevity.
Essential Tool: A must-have for any serious enthusiast’s toolbox or for use at the shop when servicing your vehicle.
Fits Various Vehicles: 17mm size is compatible with most BMW, MINI, Mercedes-Benz, Audi, VW, 2020+ Supra, and other vehicles with 17mm lug nuts.

This rugged and compact socket is perfect for maintaining your wheels and ensuring they stay in pristine condition.

Show More Show Less

Heavy-Duty Snap Ring Pliers

T#:3729833

Part#: LIS49200

Ships in 1 Business Day

$ 61.99

This product was last offered at the strikethrough price on
05-07-2026

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

The heavy duty plier construction and larger tips are designed for larger snap rings.

Magnetic Pick-Up Tool

T#:5498463

Part#: 66500

Ships in 1 Business Day

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Can't reach that bolt or tool you dropped? Telescoping Magnet to the rescue

Small VTF Adjuster 100 - 105mm

We Price Match - Give Us A Call or Chat!

T#:37925857

Part#: 860100002

In Stock

9% off MSRP $ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.00 USD

Add to Wish List

Qty

9% off MSRP

$ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.00 USD

Add to Wish List

Suvneer Wheel Hanger - M12 X 1.25 - Blue

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356105

Part#: WHLHGR-12125-BL

Ships in 5 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

The Suvneer Motorsports™ Wheel Hanger is the "third hand" you need in your trunk or toolbox.

Permatex Contact Cement

T#:2958745

Part#: 25905

Ships in 1 Business Day

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Makes a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces.

3-1/2 Ton Hydraulic Floor Jack

T#:585148

Part#: OEM24836

Ships in 6 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Features a quick lift foot pedal

Suvneer Wheel Hanger - M12 X 1.25 - Red

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356108

Part#: WHLHGR-12125-RD

Ships in 5 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

Take the heavy lifting out of your next wheel rotation with the Suvneer Motorsports™ Wheel Hanger in Red.

Piston Ring Installer

T#:1809133

Part#: W80575

Ships in 1 Business Day

$ 17.62 USD

Add to Wish List

Qty

$ 17.62 USD

Add to Wish List

Comfortable vinyl grip handles.

Radiator Pressure Test kit 14 pc

T#:3629267

Part#: ATD3300

Ships in 6 Business Days

$ 497.99 USD

Add to Wish List

Qty

$ 497.99 USD

Add to Wish List

Adapters for most European and domestic vehicles

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Clear ...

T#:26005168

Part#: WHLHGR-14125-CL

Ships in 5 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

Disc Brake Caliper Lubricant - 2oz Tube

T#:2928982

Part#: 20353

Ships in 1 Business Day

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Keep your brake contact points lubricated even under the most extreme conditions

AC Hydraulic Single-Stage Air Hydraulic Jack For High Clearance Appli...

T#:558013

Part#: TOL-25-1H

Ships in 3 Business Days

$ 2,911.99 USD

Add to Wish List

Qty

$ 2,911.99 USD

Add to Wish List

If you have a situation where no amount of positioning or floor jack extensions seem to work to lift your vehicle, you may just finally need that specialty jack. This AC Hydraulic Single-Stage Air Hydraulic Jack for high clearance applications is a top of the line, straight lift design floor jack that is both extremely durable and extremely reliable. Plus, unlike traditional jacks, there is no lifting arm that may come in contact with any part of the the vehicles body or other components that would result in damage. With a lift height of up to 24.06 inches, or up to 33.9 inches with an F250 extension, this air hydraulic jack is perfect for high lift, tight clearance needs.

Features:

Minimum height of 14.21 in
Maximum height of 24.06 in, the F250 (optional) extension offers a total extended height of 33.90 in
Hard chromium plated piston rod for long life
Built-in safety overload valve
Hand-operated dead-man’s control for optimum safety whilst lifting and lowering
Ergonomic handle with push buttons
With 2 extensions (1.97/3.94 in)

Specifications:

Capacity: 55000 lb
Min. height: 14.21 in
Max. height: 24.06 in
Frame length: 32.17 in
Handle length: 45.67 in
Width: 9.06 in
Width (with wheels): 12.28 in
Air supply: 9 - 12 bar
Air consumption: 350 l/min
Weight: 157lbs

Show More Show Less

QuickJack 6000TLX Extended Vehicle Lift Package - 110 Volt (60Hz) ...

T#:40748601

Part#: 5175638

Ships in 4 Business Days

$ 2,225.00 USD

Add to Wish List

Qty

$ 2,225.00 USD

Add to Wish List

This QuickJack package deal includes the 6000TLX extended car lift, a set of QuickJack wall hangers (T#913727), and a set of four pinch weld blocks (T#840364). The 6000TLX has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's popular 5000TLX car lift. With its extended lift point reach of 6 inches more than the 6000TL for longer wheelbases and the ability to lift an extra 3 inches, the 6000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, but they also require the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.

Show More Show Less

3-Ton Jack Stands - Pair

T#:1362398

Part#: OEM24852

Ships in 6 Business Days

$ 120.99 USD

Add to Wish List

Qty

$ 120.99 USD

Add to Wish List

Safe and secure for Garage use

Multi Use Transfer Pump

T#:1809134

Part#: W1145

In Stock

$ 18.80 USD

Add to Wish List

Qty

$ 18.80 USD

Add to Wish List

Quickly and easily transfer any fluid.

Jack Extension For Cars With High Clearance

T#:23615505

Part#: FDK2

Ships in 3 Business Days

20% off MSRP $ 116.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD

Add to Wish List

Qty

20% off MSRP

$ 116.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD

Add to Wish List

Need an extra lift on your floor jack for your especially tall vehicle? The FDK2 is here for you. Brought to you by AC Hydraulic and especially made for their products, this 4.92 inch extension will give you that extra lift you're looking for.

Fits:

DK40Q
DK60Q
DK100Q
DK120Q
DK50HLQ

Specifications:

Height: 4.92"

Show More Show Less

Permatex Brushable Form-A-Gasket, 4oz

T#:25763

Part#: 80019

Ships in 1 Business Day

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Permatex Form-A-Gasket is a brushable sealant that you can use in many automotive applications where a gasket either doesn't exist or is damaged or no longer available. This 4oz container includes a brush for easy application. Permatex is slow-drying and will not harden over time (no cracks or leaks) and does not break down from exposure to gasoline, grease, or oils. It has a workable temperature range from -65*F to 400*F and is used throughout the aviation and automotive industries.

Shipment Restriction UPS Ground/Standard shipping only. This item cannot be shipped outside of the lower 48 US states or Canada and cannot be shipped via Air services.

Show More Show Less

Infrared Digital Thermometer

T#:3672502

Part#: OEM25245

Ships in 6 Business Days

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Professional quality laser guided non-contact thermometer

3/4 Ton Engine Leveler

T#:1377515

Part#: OEM24831

Ships in 6 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Use with a engine crane for easier engine installation

5.5 Ton Hydraulic Bottle Jack With Single Lift And Extension Screw ...

T#:23615506

Part#: A3,5-170

Ships in 3 Business Days

$ 133.99 USD

Add to Wish List

Qty

$ 133.99 USD

Add to Wish List

For some of the best bottle jacks in production, stick with AC Hydraulic. Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

With extension screw for optimal use of the stroke
Jack can be used in horizontal position, as long as the pump piston is placed under the jack
Fitted with practical carrying handle for easy transport

Specifications:

Capacity: 11,000 lb
Min height: 8.27 in
Hydraulic lift: 5.91 in
Extension screw: 3.94 in
Max height: 18.11 in
Bevelled base: No

Show More Show Less

Oxygen Sensor Socket

T#:5095693

Part#: W1267

In Stock

$ 12.80 USD

Add to Wish List

Qty

$ 12.80 USD

Add to Wish List

Removes oxygen sensors located in the exhaust.

Permatex Plastic Welder

T#:2943896

Part#: 84115

Ships in 1 Business Day

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces.

QuickJack 6000TL - 6,000 Lb. Capacity - 110 Volt (60Hz)

T#:40748605

Part#: 6000TL

Ships in 4 Business Days

Starting at $ 2,075.00 USD

Add to Wish List

Starting at $ 2,075.00 USD

Add to Wish List

The 6000TL has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's 5000TL. With the ability to lift an extra 3-inches, the 6000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Show More Show Less

125 pc Rubber Grommet Assortment

T#:1809128

Part#: W5214

Ships in 1 Business Day

$ 12.48 USD

Add to Wish List

Qty

$ 12.48 USD

Add to Wish List

A must for any toolbox

3/8" Drive Breaker Bar 12" Handle

T#:3672467

Part#: KDT81221

Ships in 6 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Break loose those stubborn fasteners

Composite Trim Removal Tool Set

T#:1996196

Part#: W80648

Ships in 1 Business Day

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Set contains five unique tools for removing internal and external trim and molding fasteners.

1-1/4" Round Telescopic Magnifying Mirror With Pocket Clip

T#:641409

Part#: 2840D

Ships in 2 Business Days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Perfect for inspecting hidden areas

2 PC 1/4" 3/8" Dr Flexible Extension Set

T#:3657995

Part#: KDT87912

Ships in 1 Business Day

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

very handy to be able to flex around an object.

Reclining Hi-Low Creeper Seat

Cannot ship outside of US

T#:33213303

Part#: 5160119

Ships in 4 Business Days

$ 296.00 USD

Add to Wish List

Qty

$ 296.00 USD

Add to Wish List

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
TPR wheels are resistant to chemicals, acids, alcohol, and water
Wide, large diameter wheel improves rolling over rough surfaces
Heavy-duty non-slip textured marine grade vinyl
Comfortable thick-padded seat and backrest
Locking casters
Seat is resistant to abrasion, chemical, and oil

Specifications:

Length (Backrest Up): 33 in. / 840 mm
Length (Backrest Down): 45.25 in. / 1,150 mm
Width (Frame): 17 in. / 430 mm
Width Overall: 20.75 in. / 530 mm
Seat Height (Down): 6.25 in. / 161 mm
Backrest Height (Up): 31.5 in. / 800 mm
Seat/Backrest Width: 14.75 in. / 376 mm
Ground Clearance: ≈3 in. / 76 mm
Seat Angle Min. / Max.: ≈0° to 30°
Maximum Load: 600 lbs. / 272 kg.
Backrest Angle Adjustment: Gas spring
Seat Angle Adjustment: Mechanical Lock — 3 positions
Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
Frame Materials: Full powder coated, welded steel square tube
Weight: 41.25 lbs. / 19 kg.
Backrest Angle Min. / Max.: ≈0° to 70°

Show More Show Less

Fast Orange Hand Cleaner

T#:3629274

Part#: 23218

Ships in 1-2 days

$ 37.99

This product was last offered at the strikethrough price on
08-13-2026

$ 22.95 USD

Add to Wish List

Qty

$ 22.95 USD

Add to Wish List

Biodegradable solvent-free hand cleaner that contains no harsh chemicals

7mm Brake Caliper Socket

T#:3729717

Part#: LIS33900

Ships in 1 Business Day

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Knock that brake caliper loose with this 7mm socket!

Socket Adaptor

T#:3729711

Part#: KDT81354

Ships in 4 Business Days

$ 14.99

This product was last offered at the strikethrough price on
06-18-2026

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Adapts 1/2" to 3/8"

Extractor Set Stripped Screw 10 Pc.

T#:31556187

Part#: LIS61980

Ships in 1 Business Day

$ 51.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

Stainless Steel Square Magnetic Tray

T#:383741

Part#: ATD8762

Ships in 6 Business Days

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

The perfect place to put your nuts while you work on your car

Hand Hydraulic Junior Press

T#:35256050

Part#: PJ16H

Ships in 3 Business Days

$ 1,587.99 USD

Add to Wish List

Qty

$ 1,587.99 USD

Add to Wish List

The Hand Hydraulic Junior Press is a versatile and efficient solution for passenger car workshops and light industrial applications. Its compact design and innovative features make it an essential addition for precision pressing tasks.

Features:

Efficient Operation: Foot-operated pneumatic control ensures high-speed, precise ram movement for seamless approach to the workpiece.
Versatile Ram Design: A traversing ram with a removable end cap allows for the easy mounting of various piston heads to suit specific applications.
Durable Vee Blocks: Includes two vee blocks for added support and stability during pressing operations.

Specifications:

Capacity: 35,000 lb
Stroke: 5.91 in
Height: 63.78 in
Width: 34.84 in
Width between legs: 25.20 in
Depth between legs: 5.12 in
Clearance: 4.13-30.71 in
Weight: 287 lb

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Tools & Specialty Equipment for BMW X5 M S63 4.4L

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results