BMW X6 M S63 4.4L

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:26171623

Part#: HW-APX-M14125-90

Ships in 3 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

Enhanced strength and safety
Improved pit stop times
Simplified wheel installation and removal
Versatility with extended length wheel studs
Reduced wear on hub threads
Long-term durability and safety
Simplified maintenance and improved efficiency

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 4 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 6 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke F90 M5/M8 X5M/X6M Aflow Catted Downpipes

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.

T#:40038643

Part#: 11-063A

Ships in 4 Business Days

5% off MSRP $ 2,399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,279.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,279.99 USD

Add to Wish List

The Active Aflow Catalytic Converters are rated for engines putting out up to 800 horsepower while maintaining a high flow capacity.

Evolution Line Titanium Exhaust - F85/E86 X5M/X6M

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391371

Part#: S-BM/T/1

Back Ordered

$ 9,111.99 USD

Add to Wish List

Qty

$ 9,111.99 USD

Add to Wish List

The Akrapovic Cat-back Titanium exhaust system for the BMW X5/X6 M is designed for drivers who demand more power and less weight. In addition to weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the X5/X6 M become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Power gains come in at 5.3 hp (at 5300 RPM) and 8.4 Nm (at 5250 RPM) with just the exhaust alone, and a total weight savings of 32.7 lbs! That is a 42% overall reduced difference in weight from stock.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M

Show More Show Less

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 10 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

APEX Wheels Metal Valve Stem - Silver - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593646

Part#: HW-OEM-VALVE-SV

Ships in 3 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593645

Part#: HW-OEM-VALVE-GM

Ships in 3 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201371

Part#: EC71910ET25SMBK

Ships in 6 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Burger Motorsports JB4 Tuner - All N63 from 2013 and up

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:402620

Part#: JB4-S63TU

Ships on Jul 24, 2026

$ 899.00

This product was last offered at the strikethrough price on
05-19-2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! All customers must sign and return an emissions waiver to purchase Burger Motorsports JB4. Fits the Following BMWs: All N63 from 2013 and up

Show More Show Less

MaxiBAS BT506

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2914145

Part#: BT506

Ships in 7 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b

Show More Show Less

Active Autowerke High Flow Catted Downpipes - S63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2393421

Part#: 11-063

Ships on Jul 23, 2026

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. These S63 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory M5 downpipes therefore reducing radiant heat and increasing performance. Features: NO CEL when using this downpipe GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for 500 to 850 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Accepts OEM O2 sensor heat shield Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESi proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Made in Miami, Florida

Show More Show Less

Maxi TPMS Kit With Sensors

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5663676

Part#: AULTS508K1

Ships in 7 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

Pinpoint and replace bad TPMS Sensors

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201374

Part#: EC719105ET22SMBK

Ships in 6 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51110136

Part#: 11-041AB

Ships in 4 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

Active Autowerke’s Aflow Catted Downpipes provide a "no-compromise" solution for the G-body enthusiast who wants high-flow performance without the drawbacks of a track-only "catless" setup. These downpipes feature advanced metallic high-flow catalysts that satisfy onboard diagnostic requirements, meaning you can enjoy increased power without the headache of a Check Engine Light (CEL). By utilizing premium 304 stainless steel and a low-restriction design, these pipes are built to withstand the intense thermal cycles of a twin-turbo V8 while delivering a deep, aggressive exhaust note. This variant is a true bolt-on upgrade that preserves the daily driveability and luxury experience of your BMW while significantly improving its performance ceiling. Key Features: No CEL Operation: Engineered to work with factory emissions monitors for a dashboard-clear experience. Streamlined Exhaust Path: Mandrel-bent 3" piping with minimal bends for smooth, high-velocity exhaust gas flow. Precision Fitment: Developed through extensive R&D to provide a factory-like bolt-on installation. Hand-Made in the USA: Fabricated in-house at Active Autowerke’s Miami facility to ensure surgical quality control. Vibration Resistance: Robust TIG welding and heavy-duty brackets ensure longevity even under aggressive driving conditions. Specifications: Primary Material: Brushed 304 Stainless Steel. Inlet/Outlet: Precision cast V-band inlet and direct-fit outlet. Flow Rating: Significantly higher CFM than restrictive factory ceramic converters. Installation: 100% Bolt-on; no cutting or welding required. Finish: Natural Stainless. Lead Time: Typically custom made-to-order (Approx. 2-week build time).

Show More Show Less

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201357

Part#: EC71995ET43RS

Ships in 6 Business Days

$ 426.00 USD

Add to Wish List

Qty

$ 426.00 USD

Add to Wish List

19x9.5" ET43 APEX EC-7 Wheel 23lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	43
Weight (lbs):	23
Profile:	2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke Performance Catted Downpipes - G05/06 X5 X6, G14/15/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with the N63B engine (2020+) - VIN Required for Purchase

T#:22822601

Part#: 11-041B

Ships on Jul 23, 2026

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

Unleash the Beast: Active Autowerke Signature GESI High-Flow Downpipes The S63 and N63 twin-turbo V8s are world-class engines, but they’ve got a breathing problem. From the factory, your BMW X5M, X6M, 550i, or 650i is suffocating under massive backpressure caused by restrictive, bulky catalytic converters. If you want real power, you have to let those turbos spin. Active Autowerke’s Signature High-Flow Downpipes are the ultimate "no-compromise" upgrade. Hand-fabricated in Miami, these 3.0" downpipes utilize GESi G-Sport Ultra High Output technology. You get the raw performance of a track setup with the refined, odorless experience of a street car—and most importantly, no Check Engine Light. Why These Downpipes Belong on Your BMW: Turbo performance is all about the pressure differential. By clearing the path behind the turbine wheel, you allow the turbos to work significantly less to produce significantly more. Turbo Response: Experience a massive reduction in lag with quicker spool-up and instant throttle tip-in. Massive Power Ceiling: The 4.5" GESi 400-cell cores are rated for 500hp to 850hp, ensuring they won't become a bottleneck as you climb the ladder of modifications. Clean & Odorless: Forget the "gas station" smell of catless downpipes. These proprietary precious-metal catalysts keep the air clean and your cabin comfortable. Hand-Built Precision These aren't mass-produced units. Each set is TIG-welded 304 stainless steel with cast upper V-band flanges for a factory-perfect seal. Because Active Autowerke builds these in-house, the fitment is surgical—no "massaging" or welding required for a secure bolt-on install. Turner Fitment Note: To guarantee 100% accuracy for your build, please provide your VIN at checkout. Note: These are F-chassis specific; G-body vehicles with the N63B engine require a different configuration. Core Features: No CEL Guarantee: Optimized for catalytic efficiency to keep your dashboard clear. 49-State Legal: EPA Registered and fully OBD2 compliant (Excludes CA). Built for Heat: Rated to withstand up to 1,500°F and reaches operational efficiency in just 9 seconds. Legendary Durability: 304 stainless substrate is furnace-braised to the mantle for maximum vibration resistance. Warranty Protected: Includes a 5-year/50,000-mile structural warranty and a 2-year/25,000-mile catalyst core warranty.* Technical Specs: Material: TIG-Welded 304 Stainless Steel Tubing: Full 3.0" (76mm) Mandrel-Bent Piping Catalyst: GESi Ultra High Output (400 CPI) HP Rating: 500hp - 850hp Lead Time: Custom made-to-order (Approx. 2 weeks) *A Note on Burble Tunes: We love a good exhaust crackle as much as anyone, but "aggressive" burble or pop maps physically destroy catalytic substrates. Use of such tunes will void the warranty on the GESi core.

Show More Show Less

Active Autowerke GESI Catted Downpipes - S63 N63

For 2014+ model years only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:397488

Part#: 11-041

Ships in 4 Business Days

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Active Autowerke is proud to bring you our hand made Signature S63/N63 Downpipes for the twin-turbo V8 BMW X5M, X6M, 550i, 650i, X5, X6 models. This variant includes a pair of 4.5" ultra high flow GESI catalytic converter that will NOT produce a CEL!

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

For 2014+ model years only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2014+ model years only

T#:51075079

Part#: 11-041A

Ships in 4 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)

Show More Show Less

Active Autowerke A-Flow Catted Downpipes - S63/N63

For Model Years 2010-2012 Only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2010-2012 Only

T#:51110141

Part#: 11-041AF

Ships in 4 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

For the BMW enthusiast seeking an aggressive upgrade for their 2010–2012 X5M or X6M without the drawbacks of "stinky" exhaust or frequent error codes, Active Autowerke offers the Aflow Catted Downpipes. These units provide the performance benefits typically associated with track-only pipes while maintaining high-flow catalytic efficiency. This design prevents the raw fuel odor and excessive cabin drone often found in catless setups, making them the ideal choice for a performance-oriented daily driver. Each set is custom-made in Miami, ensuring an exact, surgical fit to the factory mounting points. By utilizing high-quality casted V-band flanges and premium materials, these downpipes offer a reliable, leak-free solution that enhances the sophisticated V8 exhaust note without triggering the Check Engine Light (CEL). Key Features: No CEL Guarantee: Advanced Aflow catalyst design avoids catalytic efficiency warnings on the dashboard. Refined Exhaust Note: Enhances the natural V8 growl while maintaining high-end luxury refinement. Cast V-Band Connections: Precision upper flanges ensure a perfect, factory-like seal to the turbo housing. Direct Bolt-On: Replaces bulky OEM ceramic converters with no cutting or welding required. Thermal Management: Efficiently handles the high heat output of the BMW twin-turbo V8 platform. U.S. Manufacturing: Fabricated in-house to meet Active Autowerke’s high standards of quality control. Specifications: Primary Material: TIG-Welded 304 Stainless Steel. Manufacturing Location: Miami, FL, USA. Inlet Type: Casted Stainless Steel Flange. Weight Reduction: Significantly lighter than the heavy factory ceramic catalytic assemblies. Finish: Industrial brushed stainless. Build Time: Custom made-to-order (Approx. 2 weeks).

Show More Show Less

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201360

Part#: EC71995ET33RS

Ships in 6 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201359

Part#: EC71995ET33SMBK

Ships in 6 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201361

Part#: EC71995ET33AN

Ships in 6 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results