BMW F97 X3 M S58 3.0L

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Performance Brake Fluid Flush Kit - Level 3

T#:15677547

Part#: 007237SCH01A-KT

Ships on Oct 12, 2026

Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Qty

Sale - Save 9%

$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

AC Hydraulic DK13HLQ Floor Jack With QuickLift Pedal - 2900lb Capacit...

T#:558012

Part#: TOL-13HLQ

In Stock

20% off MSRP $ 837.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 669.99 USD

Add to Wish List

Qty

20% off MSRP

$ 837.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 669.99 USD

Add to Wish List

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

Very low minimum height of only 3.15 in
Wide and robust frame made of high-strength steel
Fitted with quick-lift pedal for easy reach of lifting point
Precise and safe control whilst lowering
Manual dead man’s release for optimum safety when lowering
Built-in safety overload valve
Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
Ergonomically designed handle ensuring positive and safe operation

Specifications:

Capacity: 2900 lb
Min. height: 3.15 in
Max. height: 28.94 in
Frame length: 37.01 in
Handle length: 37.40 in
Frame height: 6.30 in
Width: 18.90 in
Weight: 86 lb

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 7 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMW F8X G8X Exhaust Valve Cable Extender

T#:22295072

Part#: 11-074G

Ships in 3 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
Custom Lengths: Custom lengths available upon request for a tailored solution.
High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

High-Performance Ignition Service Kit - S58 3.0L

T#:21965995

Part#: S58IGNKT

Ships on Aug 12, 2026

Sale - Save 19% $ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.69 USD

Add to Wish List

Qty

Sale - Save 19%

$ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.69 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 NGK 96206 Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet

Show More Show Less

Universal Valve Spring Compressor

T#:1809130

Part#: W89409

In Stock at Vendor

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

10pc 3/8" Dr Hex Bit Socket Set

T#:1856004

Part#: W1388

Ships in 2 Business Days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Chrome vanadium steel construction.

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Automatic Transmission Service Kit - 8HP76 - BMW F97 X3M, F98 X4M ...

T#:31158779

Part#: TMSF97F988HPKT1

Ships in 4 Business Days

$ 248.42 USD

Add to Wish List

Qty

$ 248.42 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 9 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: The 8HP76 transmission is originally filled with 9.3 liters of fluid. This kit contains 9 liters of fluid as some fluid always remains in the valve body, accumulator, and transmission. The 9 liters of fluid included is enough to drain both the transmission pan, the oil cooler, and the oil cooler lines. If you have an upgraded transmission cooler, we recommend picking up an additional liter of fluid to account for the increased capacity. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.

Show More Show Less

3/8" Dr. 5/8" Extended Spark Plug Socket

T#:2242226

Part#: W80533

Ships in 2 Business Days

$ 20.25 USD

Add to Wish List

Qty

$ 20.25 USD

Add to Wish List

Extended socket length reaches confined areas.

Coil Spring Compressor

T#:1809126

Part#: W80554

Ships in 3 Business Days

$ 64.25 USD

Add to Wish List

Qty

$ 64.25 USD

Add to Wish List

Safely and easily compresses coil springs accessible from the center of the coil.

407 Piece O-Ring Assortment

T#:1809147

Part#: W5202

In Stock at Vendor

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Nitrile Butadiene Rubber

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Piston Ring Comp 3-1/2" to 7"

T#:2242223

Part#: W80573

Ships in 2 Business Days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Aug 10, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Fender Cover

T#:1855978

Part#: W80583

Ships in 2 Business Days

$ 20.72 USD

Add to Wish List

Qty

$ 20.72 USD

Add to Wish List

Heavy duty vinyl with foam backing.

DK20HLQ 4000lb Floor Jack With High Lift

T#:26471569

Part#: TOL-DK20HLQ

Ships in 3 Business Days

20% off MSRP $ 1,088.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 870.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,088.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 870.99 USD

Add to Wish List

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

In Stock

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

AC Hydraulic DK20Q Floor Jack With QuickLift Pedal - 4400lb Capacity ...

T#:558011

Part#: TOL-DK20Q

Ships in 3 Business Days

20% off MSRP $ 585.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 468.00 USD

Add to Wish List

Qty

20% off MSRP

$ 585.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 468.00 USD

Add to Wish List

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

Very low minimum height of only 3.15 inches
Wide and robust frame made of high-strength steel
Precise and safe control whilst lowering
Manual dead man’s release for optimum safety when lowering
Built-in safety overload valve
Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
Ergonomically designed handle ensuring positive and safe operation
DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

Capacity: 4400 lbs
Min. height: 3.15 inches
Max. height: 19.49 inches
Frame length: 25.98 inches
Handle length: 37.40 inches
Frame height: 6.30 inches
Width: 16.14 inches
Weight: 68 lbs

Show More Show Less

BMS Elite F97 X3M & F98 X4M Performance Intake - Red Filters - Matte ...

T#:26871559

Part#: BMSF97REDBLK

Ships on Aug 10, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Introducing the BMS Elite X3M & X4M Performance Intake kit. Available in two filter options, this kit comes with everything needed for a seamless installation. Increasing both turbocharger sound and overall engine performance, this intake kit is sure to boost you X3M or X4M to new extremes. Adds up to 50 horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Huge 3.5" mandrel-bent aluminum tubing CNC Billet aluminum fittings Retains OEM cold air ducting Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

BMS Elite F97 X3M & F98 X4M Performance Intake - Blue Filters - Matte...

T#:26871558

Part#: BMSF97BLUBLK

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Introducing the BMS Elite X3M & X4M Performance Intake kit. Available in two filter options, this kit comes with everything needed for a seamless installation. Increasing both turbocharger sound and overall engine performance, this intake kit is sure to boost you X3M or X4M to new extremes. Adds up to 50 horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Huge 3.5" mandrel-bent aluminum tubing CNC Billet aluminum fittings Retains OEM cold air ducting Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

3/16" X 25ft Ultrabend Brake Line

T#:641940

Part#: BREZ100

Ships in 2 Business Days

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Replace your steel brake line with easy to bend brake line

Digital Caliper 0-6" (150mm)

T#:1809139

Part#: W80152

In Stock at Vendor

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Measures outside, inside, step and depth.

Pro Pistol Grip Grease Gun

T#:1809157

Part#: W54204

In Stock at Vendor

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Professional quality heavy duty construction for long service life.

7pc Impact U Joint & Adaptor Set

T#:1996201

Part#: W30937

Ships in 2 Business Days

$ 26.43 USD

Add to Wish List

Qty

$ 26.43 USD

Add to Wish List

Chrome vanadium alloy steel construction for strength and durability.

Replacement Panel Air Filters - F97/F98 X3M/X4M

T#:2393420

Part#: FB01090

In Stock at Vendor

$ 328.99 USD

Add to Wish List

Qty

$ 328.99 USD

Add to Wish List

BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

Vacuum & Fuel Pump Tester

T#:1809129

Part#: W80594

In Stock at Vendor

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Check fuel pump suction or pressure.

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 2 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

AC Hydraulic VL6 Transmission Jack - 1,300lb Capacity

T#:41728758

Part#: TOL-VL6

Ships in 3 Business Days

19% off MSRP $ 667.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.99 USD

Add to Wish List

Qty

19% off MSRP

$ 667.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.99 USD

Add to Wish List

Having a transmission jack can prevent a lot of struggling and exhaustion from attempting to install a transmission by hand or through some other sketchy method we have all considered. AC Hydraulic's VL3 Transmission Jack is a great transmission jack that will alleviate these issues. In addition to being used for the transmisison, this jack is also great for other lifting operations such as the mounting of springs, fuel tanks, exhaust pipes, and more.

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Aug 10, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

3/8" Dr 250 inlb Torque Wrench

T#:2242227

Part#: M197

In Stock at Vendor

$ 126.04 USD

Add to Wish List

Qty

$ 126.04 USD

Add to Wish List

Dual scale measurement adjustments in both Inch-Pound and Newton meter.

Brake Line Bender

T#:1809149

Part#: W80675

In Stock at Vendor

$ 29.70 USD

Add to Wish List

Qty

$ 29.70 USD

Add to Wish List

Precision Tubing Bender

Burger Motorsport S58 JB4 BMW Performance Tuner - F97/F98 X3M/X4M ...

T#:637255

Part#: S58JB4F97F98

In Stock

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

Simple, plug-and-play installation can yield results of up to 60 wheel horsepower on stock cars - or over 100 horsepower on E85!

Pulley Puller

T#:5095696

Part#: W80653

Ships in 2 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Pulls pressed on 1 and 2 groove pulleys on alternators and power steering pumps.

8pc Mtric Crow Foot Wrench Set

T#:2242238

Part#: W352

Ships in 2 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Heat treated alloy steel.

Fly Wheel Turner

T#:1809145

Part#: W80510

Ships in 2 Business Days

$ 34.69 USD

Add to Wish List

Qty

$ 34.69 USD

Add to Wish List

For turning and holding flexplates and flywheels.

CV Joint Boot Clamp Band Tool

T#:5122269

Part#: W83011

Ships in 2 Business Days

$ 23.31 USD

Add to Wish List

Qty

$ 23.31 USD

Add to Wish List

Helpful tool for proper axle boot installations.

Harmonic Balancer Puller and Installer Set

T#:1809123

Part#: W89711

Ships in 2 Business Days

$ 166.09 USD

Add to Wish List

Qty

$ 166.09 USD

Add to Wish List

Harmonic Balancer Puller and Installer Set

The Harmonic Balancer Puller and Installer Set is an essential tool kit designed for the effective removal and installation of harmonic balancers. This master set includes all the necessary bolts and adapters required for a wide range of applications, making it a versatile addition to any workshop or toolbox.

Benefits:

Comprehensive Set: Includes all required bolts and adapters for most applications, ensuring compatibility with various vehicle models.
Bilingual Instructions: Comes with bilingual instructions for easy use and understanding, catering to a broader range of users.
Replacement Part Availability: Replacement parts are readily available, ensuring the tool kit remains functional and useful over time.
Efficient Performance: Streamlines the process of removing and installing harmonic balancers, saving time and effort.
Durable Construction: Built from high-quality materials for long-lasting durability and reliable performance.

s.

Show More Show Less