BMW F97 X3 M S58 3.0L

VTT “OBD-LOCK” ODB Port Locking Tool

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced After 1995

T#:26938503

Part#: VTT-OBD-LOCK

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.

Show More Show Less

Port Injector Plugs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Blue - Most BMWs 2006+ (E...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530036

Part#: COOLANTCAPBLUE

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

VTT F9X X3/4M Rear Bushing Insert Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404885

Part#: VTT-X3M-REAR-IN1

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

VTT Billet Coolant Reservoir Cap - Anodized Red - Most BMWs 2006+ (E/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530034

Part#: COOLANTCAPRED

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

BMW F8X G8X Exhaust Valve Cable Extender

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22295072

Part#: 11-074G

Ships in 3 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
Custom Lengths: Custom lengths available upon request for a tailored solution.
High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

VTT Billet Engine Stand Plate - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:10128424

Part#: VTT-ENGPLT-V2

Back Ordered

Starting at $ 112.99 USD

Add to Wish List

Starting at $ 112.99 USD

Add to Wish List

Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? Vargas answered yes to all of those things and made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! The engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. These are lightweight, and rated for over 1200 lbs!

Show More Show Less

VTT M14 Titanium Wheel Stud Kits

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7292018

Part#: TISTUD201425

Back Ordered

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 6 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMW Jack Pad Silver - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

VTT Billet Coolant Reservoir Cap - Anodized Clear - Most BMWs 2006+ (...

This coolant cap retains ALL of the factory provisions by simply allowing you to snap t...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530035

Part#: COOLANTCAPRAW

Ships in 3 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Vargas S58 One Way Crankcase Breather - BMW S58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:697896

Part#: VTT-S58-BREATHER

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW S58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all S58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter NOTE: NOT ALL THE S58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 9 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

BMS Elite F97 X3M & F98 X4M Performance Intake - Red Filters - Matte ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26871559

Part#: BMSF97REDBLK

Ships on Jul 20, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Introducing the BMS Elite X3M & X4M Performance Intake kit. Available in two filter options, this kit comes with everything needed for a seamless installation. Increasing both turbocharger sound and overall engine performance, this intake kit is sure to boost you X3M or X4M to new extremes. Adds up to 50 horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Huge 3.5" mandrel-bent aluminum tubing CNC Billet aluminum fittings Retains OEM cold air ducting Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

VTT Plug And Play Billet S58 Throttle Body Coolant Delete Kit ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26971821

Part#: VTT-S58-TB-COOLA

Ships in 10 Business Days

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Heat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included: One Plug and Play TB Coolant Delete Hose Kit Features: Billet 6061 Anodized coolant fittings for long leak-free life Reinforced 7-ply silicone hose for strength and longevity Vibration-resistant crimp clamps 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible

Show More Show Less

VTT F9X X3/4M Front Bushing Inserts

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404887

Part#: VTT-X3M-FR-INS

Ships in 1-2 days

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set Kit includes: Two Billet Bushing inserts Two 46mm Hardened Steel Washers

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Jul 20, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

VTT S58 Turbocharger Install Kit - BMW S58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49023067

Part#: VTT-S58-INSTL

Ships in 10 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Everything needed for a successful install without having to make a trip to the dealer

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

BMS Elite F97 X3M & F98 X4M Performance Intake - Blue Filters - Matte...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26871558

Part#: BMSF97BLUBLK

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Introducing the BMS Elite X3M & X4M Performance Intake kit. Available in two filter options, this kit comes with everything needed for a seamless installation. Increasing both turbocharger sound and overall engine performance, this intake kit is sure to boost you X3M or X4M to new extremes. Adds up to 50 horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Huge 3.5" mandrel-bent aluminum tubing CNC Billet aluminum fittings Retains OEM cold air ducting Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

VTT Billet BMW Transfer Case Bushing Inserts - Version A

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404870

Part#: VTT-XFER-CASE-BU

In Stock

$ 137.99

This product was last offered at the strikethrough price on
05-19-2026

$ 127.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 137.99

This product was last offered at the strikethrough price on
05-19-2026

$ 127.99 USD

Limited Qty Sale

Add to Wish List

Soft bushings are the enemy of launching hard, and keeping your drivetrain together. The BMW Transfer Case bushings are notoriously soft, and that is the opposite of what you want when launching a car hard. You can replace the bushing with a solid one, but this is time-consuming usually requires lowering or removing the transfer case, and results in a lot of added NVH. The best path is simply to reduce the amount of flex of the factory bushing so you keep the nice manners when cruising around town, and at idle, but when its time to the launch the transfer case cannot move as it could without the insert. These come as a set of two with 2 bolts to keep them in place. Install time once you get to them is about 2-3 minutes. Could not be easier. Put some lube on them, push them in, and tighten the screws. These are a MUST for high-power G8X, and F9X X3/X4M Builds. All platforms they fit are below. Features: 6061- T6 aluminum construction Easy to install Fully reversible Do not add NVH

Show More Show Less

VTT BMW G Series Billet Oil Cap - Blue Anodized

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641130

Part#: OILCAPBLUE1

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 20, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

20" APEX VS-5RX Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:37925913

Part#: VS5RX2095105ANKT

Ships in 5 Business Days

Sale - Save 15% $ 4,036.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,430.60 USD

Add to Wish List

Qty

Sale - Save 15%

$ 4,036.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,430.60 USD

Add to Wish List

Real Performance means designing the best solution possible, without compromise. SUVs and EVs have consistently evolved to be faster and handle better, but they’ve also grown progressively heavier. That calls for a stronger wheel with a higher load-rating to keep up. The VS-5RX utilizes our motorsport-proven technology to provide a true performance upgrade in a remarkably lightweight wheel that’s packed with subtle features that strengthen and support the immense weight and power of modern SUV and EV applications.

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 20, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

20" APEX VS-5RX Square Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:37925931

Part#: VS5RX2095ANKT

Ships in 5 Business Days

Sale - Save 15% $ 3,996.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,396.60 USD

Add to Wish List

Qty

Sale - Save 15%

$ 3,996.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,396.60 USD

Add to Wish List

Real Performance means designing the best solution possible, without compromise. SUVs and EVs have consistently evolved to be faster and handle better, but they’ve also grown progressively heavier. That calls for a stronger wheel with a higher load-rating to keep up. The VS-5RX utilizes our motorsport-proven technology to provide a true performance upgrade in a remarkably lightweight wheel that’s packed with subtle features that strengthen and support the immense weight and power of modern SUV and EV applications.

Show More Show Less

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes w GESI CAT ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:638761

Part#: 11-070

Ships in 3 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.

Show More Show Less

VTT Carbon Fiber Dragy Holder

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20749252

Part#: VTT-DHCF

Ships in 10 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

These are made from 100% Pre-Preg Carbon Fiber for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on

Show More Show Less

Vargas Ignition Coil Kit (Red) - B58/B48/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5309604

Part#: VTT-COIL-B58-RED

Ships in 5 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Burger Motorsport S58 JB4 BMW Performance Tuner - F97/F98 X3M/X4M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637255

Part#: S58JB4F97F98

Ships in 1 Business Day

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

Simple, plug-and-play installation can yield results of up to 60 wheel horsepower on stock cars - or over 100 horsepower on E85!

VTT BMW G Series Billet Oil Cap - Red Anodized

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641120

Part#: OILCAPRED1

Ships in 4 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

F9X X3/4M Billet Diff Lock Down Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404860

Part#: VTT-F9X-LDK

Ships in 4 Business Days

Starting at $ 314.99 USD

Add to Wish List

Starting at $ 314.99 USD

Add to Wish List

VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 differential bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

BMW Jack Pad Blue - Pair

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31191904

Part#: BMWJACKPADBLUE2

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

Safe Lifting: Designed for use at factory jack points to prevent damage.
Durable Construction: Made from solid billet aluminum for long-lasting performance.
Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
Non-Damaging: Does not touch or harm painted surfaces.
USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

Show More Show Less

21" APEX VS-5RX Staggered Wheel Set - Brushed Clear

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:38890942

Part#: VS5RX95105CKT

Back Ordered

Sale - Save 15% $ 4,596.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,906.60 USD

Add to Wish List

Qty

Sale - Save 15%

$ 4,596.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,906.60 USD

Add to Wish List

Real Performance means designing the best solution possible, without compromise. SUVs and EVs have consistently evolved to be faster and handle better, but they’ve also grown progressively heavier. That calls for a stronger wheel with a higher load-rating to keep up. The VS-5RX utilizes our motorsport-proven technology to provide a true performance upgrade in a remarkably lightweight wheel that’s packed with subtle features that strengthen and support the immense weight and power of modern SUV and EV applications.

Show More Show Less

20" APEX VS-5RX Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:37925911

Part#: VS5RX20910BKKT

Back Ordered

Sale - Save 15% $ 3,996.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,396.60 USD

Add to Wish List

Qty

Sale - Save 15%

$ 3,996.00

This product was last offered at the strikethrough price on
06-30-2026

$ 3,396.60 USD

Add to Wish List

Real Performance means designing the best solution possible, without compromise. SUVs and EVs have consistently evolved to be faster and handle better, but they’ve also grown progressively heavier. That calls for a stronger wheel with a higher load-rating to keep up. The VS-5RX utilizes our motorsport-proven technology to provide a true performance upgrade in a remarkably lightweight wheel that’s packed with subtle features that strengthen and support the immense weight and power of modern SUV and EV applications.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Black - Most BMWs 2006+ (...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530033

Part#: COOLANTCAPBLK

Back Ordered

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results