Home
Drivetrain

Vargas Turbo Technologies BMW Drivetrain Parts for BMW F97 X3 M S58 3.0L

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Differential Mounts (5)

Sort By:

VTT F9X X3/4M Rear Bushing Insert Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404885

Part#: VTT-X3M-REAR-IN1

In Stock

$ 137.99 USD

Add to Wish List

Qty

$ 137.99 USD

Add to Wish List

VTT F9X X3/4M Front Bushing Inserts

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404887

Part#: VTT-X3M-FR-INS

Ships in 10 Business Days

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set Kit includes: Two Billet Bushing inserts Two 46mm Hardened Steel Washers

Show More Show Less

VTT Billet BMW Transfer Case Bushing Inserts - Version A

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404870

Part#: VTT-XFER-CASE-BU

In Stock

$ 137.99

This product was last offered at the strikethrough price on
05-19-2026

$ 127.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 137.99

This product was last offered at the strikethrough price on
05-19-2026

$ 127.99 USD

Limited Qty Sale

Add to Wish List

Soft bushings are the enemy of launching hard, and keeping your drivetrain together. The BMW Transfer Case bushings are notoriously soft, and that is the opposite of what you want when launching a car hard. You can replace the bushing with a solid one, but this is time-consuming usually requires lowering or removing the transfer case, and results in a lot of added NVH. The best path is simply to reduce the amount of flex of the factory bushing so you keep the nice manners when cruising around town, and at idle, but when its time to the launch the transfer case cannot move as it could without the insert. These come as a set of two with 2 bolts to keep them in place. Install time once you get to them is about 2-3 minutes. Could not be easier. Put some lube on them, push them in, and tighten the screws. These are a MUST for high-power G8X, and F9X X3/X4M Builds. All platforms they fit are below. Features: 6061- T6 aluminum construction Easy to install Fully reversible Do not add NVH

Show More Show Less

F9X X3/4M Billet Diff Lock Down Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404860

Part#: VTT-F9X-LDK

Ships in 1-3 days

Starting at $ 314.99 USD

Add to Wish List

Starting at $ 314.99 USD

Add to Wish List

VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 differential bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less