BMW X Series G05 X5 (2019+)

Automatic Transmission Service Kit

For Pre-LCI models only

For GA8HP70Z or GA8HP45Z automatic transmissions

T#:5389733

Part#: 24118612901TMSKT

In Stock

Sale - Save 23% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD

Add to Wish List

Qty

Sale - Save 23%

$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles

Show More Show Less

Performance Brake Fluid Flush Kit - Level 3

T#:15677547

Part#: 007237SCH01A-KT

In Stock

Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Qty

Sale - Save 9%

$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.

Show More Show Less

Automatic Transmission Service Kit - BMW 8HP F & G-Chassis- Liqui Mol...

For Pre-LCI models only

T#:31191945

Part#: TMS8HPATSKT1

In Stock

Sale - Save 1% $ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD

Add to Wish List

Qty

Sale - Save 1%

$ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.

Show More Show Less

High-Performance Ignition Service Kit - B58TU 3.0L

T#:21965984

Part#: B58TUIGNKT

Ships on Aug 12, 2026

Sale - Save 19% $ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.69 USD

Add to Wish List

Qty

Sale - Save 19%

$ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.69 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 NGK 96206 Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet

Show More Show Less

Liqui Moly Special Tec LL-01 FE 0w-30 Oil Change Kit

T#:52516245

Part#: 83212365950KT1

In Stock

$ 106.99 USD

Add to Wish List

Qty

$ 106.99 USD

Add to Wish List

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

Ships in 10 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

Automatic Transmission Service Kit - With Aluminum Oil Pan

For Pre-LCI models only

T#:53644251

Part#: URO011913KT

In Stock

Sale - Save 1% $ 252.99

This product was last offered at the strikethrough price on
05-30-2026

$ 249.72 USD

Add to Wish List

Qty

Sale - Save 1%

$ 252.99

This product was last offered at the strikethrough price on
05-30-2026

$ 249.72 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure.

Show More Show Less

Performance Accessory Belt Kit - Kevlar Reinforced - BMW B46TU/B48TU...

T#:29798952

Part#: 11288650740T1KT

Ships on Oct 27, 2026

Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Qty

Sale - Save 24%

$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: ECS Tuning Kevlar Reinforced Performance Accessory Belt - Designed to resist OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

OEM Accessory Belt Service Kit - B46/48 B58

T#:587399

Part#: 112886137071ABKT

Back Ordered

Sale - Save 18% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.57 USD

Add to Wish List

Qty

Sale - Save 18%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.57 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

Automatic Transmission Service Kit - 8HP Automatic Transmissions ...

For Pre-LCI models only

T#:554535

Part#: 8HPATSKT

In Stock

$ 384.54 USD

Add to Wish List

Qty

$ 384.54 USD

Add to Wish List

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

Automatic transmission filter with associated hardware
Oil pan gasket
Drain plug with sealing washer
Fill plug with sealing washer
7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less

Automatic Transmission Service Kit - GA8HP51X / GA8HP51Z - BMW G2X G3...

For Pre-LCI vehicles with a production date of 07/2020+ and the B58TU (B58D/B58C) engin...

T#:53361559

Part#: 24118743462KT3

In Stock at Vendor

$ 265.70

This product was last offered at the strikethrough price on
05-08-2026

$ 263.94 USD

Add to Wish List

Qty

$ 263.94 USD

Add to Wish List

Don't let your BMW's performance degrade due to neglected maintenance. Over time, automatic transmission fluid breaks down, leading to a buildup of sludge and deposits that can clog the valve body and contaminate the filter. This results in sluggish shifting, gear slipping, and eventually, catastrophic transmission failure. Protect your investment with this comprehensive Automatic Transmission Service Kit, designed to restore smooth operation and factory-fresh shift quality.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

European Socket Starter Kit

T#:41695009

Part#: EUROHEADSET1KT

Ships on Sep 2, 2026

Sale - Save 18% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD

Add to Wish List

Qty

Sale - Save 18%

$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD

Add to Wish List

Exceptional tools designed to handle all types of European fasteners with ease.

Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Raw Fi...

For Pre-LCI models only

T#:1241337

Part#: 24118612901T1KT

Back Ordered

Sale - Save 1% $ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 448.14 USD

Add to Wish List

Qty

Sale - Save 1%

$ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 448.14 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

N63 Timing Chain Kit

For Vehicles Produced Between 2009-2013

T#:41863702

Part#: 11317594899T1KT

Back Ordered

Sale - Save 19% $ 787.68

This product was last offered at the strikethrough price on
05-03-2026

$ 639.08 USD

Add to Wish List

Qty

Sale - Save 19%

$ 787.68

This product was last offered at the strikethrough price on
05-03-2026

$ 639.08 USD

Add to Wish List

This BMW N63 Timing Chain Kit is a must-have for proactive maintenance or full engine service, giving owners peace of mind and performance confidence. Restore your BMW’s precision and protect your investment with this high-quality, cost-effective solution.

Show More Show Less

Oil Drain Plug

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Qty

Sale - Save 29%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Includes a one time use crush washer.

Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and Gen2 B58 3.0...

T#:27871828

Part#: 11428583896TKT

In Stock at Vendor

$ 140.03 USD

Add to Wish List

Qty

$ 140.03 USD

Add to Wish List

One unfortunate problem BMW failed to address with the B58 engines is leaking oil filter housing gaskets. If your oil filter housing gaskets are leaking, you will notice a slow oil loss, pooling oil under your vehicle, and oil running down the left rear side of your engine block and on the side of your oil pan. This kit includes all-new gaskets to re-seal your filter housing plus Liqui-Moly oil and a new Hengst filter to get your car back up and running and leak-free!

Show More Show Less

ECS 12.5mm Wheel Spacer & ECS Conical Seat Bolt Kit

T#:55102420

Part#: 002411ECSKT23

In Stock

$ 311.89 USD

Add to Wish List

Qty

$ 311.89 USD

Add to Wish List

This staggered wheel spacer kit is designed to broaden your track width, lowering your vehicle's roll center, reducing body roll, and delivering sharper turn-in response, all while filling out the wheel wells for an undeniable track-ready presence.

Show More Show Less

Bavarian Autosport Hub Adapter With Hub Puller Slide Hammer Adapter A...

T#:56254753

Part#: B8800120KT2

In Stock

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Combining a heavy duty hub adapter with dedicated slide hammer and impact force screw attachments, this kit is built for serious mechanics and track day drivers who need unyielding strength to get the job done right the first time.

Show More Show Less

Accessory Belt Service Kit - HD Gates Belt - BMW B46TU/B48TU B58TU ...

T#:29798950

Part#: 11288650740TKT

In Stock

Sale - Save 15% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 121.31 USD

Add to Wish List

Qty

Sale - Save 15%

$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 121.31 USD

Add to Wish List

Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: Gates Green Heavy Duty Accessory Belt - Designed to exceed OE durability, felxibility, and longevity OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tips - 2.75 Inlet - 3...

T#:55857771

Part#: 026732TMS03KTKT2

In Stock

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

JB4 Tuner With JB4 Bluetooth Wireless Connect Kit - N63R

T#:56074198

Part#: JB4-N63R-GKT2

In Stock

$ 938.00 USD

Add to Wish List

Qty

$ 938.00 USD

Add to Wish List

The JB4 isn't just a basic boost controller; it's a secondary brain for your BMW. By linking directly to the car’s internal CANbus network, it dynamically adjusts boost, fueling, and timing to extract more out of your N63R engine

Show More Show Less

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

T#:51672701

Part#: VTT-EXTENDED-STU

Ships in 10 Business Days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Billet Oil Drain Adapter - -10AN Male - BMW B58

T#:52094563

Part#: VTT-FAB-040-AN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...

For vehicles with VTT Billet & Cast Valve Covers

T#:52270290

Part#: OC16OADAPSC

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.

Hitachi Ignition Coil - BMW B58 B48/46 B38

T#:48850056

Part#: 12137619385

Ships in 6 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Get your engine's spark back with new ignition coils.

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

Active Autowerke S63 N63 A-Flow Catted Downpipes

T#:51110136

Part#: 11-041AB

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

Active Autowerke’s Aflow Catted Downpipes provide a "no-compromise" solution for the G-body enthusiast who wants high-flow performance without the drawbacks of a track-only "catless" setup. These downpipes feature advanced metallic high-flow catalysts that satisfy onboard diagnostic requirements, meaning you can enjoy increased power without the headache of a Check Engine Light (CEL). By utilizing premium 304 stainless steel and a low-restriction design, these pipes are built to withstand the intense thermal cycles of a twin-turbo V8 while delivering a deep, aggressive exhaust note. This variant is a true bolt-on upgrade that preserves the daily driveability and luxury experience of your BMW while significantly improving its performance ceiling. Key Features: No CEL Operation: Engineered to work with factory emissions monitors for a dashboard-clear experience. Streamlined Exhaust Path: Mandrel-bent 3" piping with minimal bends for smooth, high-velocity exhaust gas flow. Precision Fitment: Developed through extensive R&D to provide a factory-like bolt-on installation. Hand-Made in the USA: Fabricated in-house at Active Autowerke’s Miami facility to ensure surgical quality control. Vibration Resistance: Robust TIG welding and heavy-duty brackets ensure longevity even under aggressive driving conditions. Specifications: Primary Material: Brushed 304 Stainless Steel. Inlet/Outlet: Precision cast V-band inlet and direct-fit outlet. Flow Rating: Significantly higher CFM than restrictive factory ceramic converters. Installation: 100% Bolt-on; no cutting or welding required. Finish: Natural Stainless. Lead Time: Typically custom made-to-order (Approx. 2-week build time).

Show More Show Less

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...

For vehicles with VTT Modular PCV/Catch Can Systems

T#:52270288

Part#: OCC1DUADRAVAL

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.

Vargas Coolant Level Extension Harness - BMW B48/B58/S58

T#:51813310

Part#: VTT-FAB-HC

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

T#:52129707

Part#: VTT-FAB-064

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.

VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...

T#:49822558

Part#: VTTB58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

Vargas Remote Oil Cooler Adapter - BMW B58, Toyota A90/A91

T#:51778122

Part#: VTT-B58-OIL-COOL

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

The VTT Billet B58 Remote Oil Cooler Adapter is an ideal upgrade for B58-powered platforms.

Vargas "Head Handler" Lifting Tool - Red - Short - BMW B58/N54/N55/S5...

T#:51918856

Part#: VTT-HHREDSHRT

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT Billet "Head Handler" is the definitive solution for technicians and BMW enthusiasts who frequently perform top-end engine work.

Active Autowerke AFlow Catted Downpipe - B58N G06/G06/G07

For 2024+ Models -- Please call in with vin prior to purchase

T#:51426482

Part#: 11-062NA

Ships in 10 Business Days

$ 1,519.00 USD

Add to Wish List

Qty

$ 1,519.00 USD

Add to Wish List

Active Autowerke brings motorsport technology to street-legal applications with the B58N Aflow Catted Downpipe. This system features a high-efficiency 400 Cell Per Square Inch (CPSI) Active Aflow catalytic converter that is EPA registered and 49-state legal. By utilizing proprietary precious metal loading, this catalyst reaches operational efficiency within just 9 seconds of startup, ensuring the vehicle remains fully OBD2 compliant. The furnace-brazed stainless steel substrate ensures extreme durability under high-boost conditions. This downpipe provides the flow characteristics of a race pipe while effectively neutralizing harmful emissions and odors, protecting both the environment and the vehicle's passengers. Key Features Active AFlow High-Flow Catalyst: 400 CPSI substrate designed to provide maximum flow while maintaining EPA compliance. Rapid Light-Off Time: Reaches operational efficiency within 9 seconds, ensuring OBD2 readiness monitors remain active. Forced Induction Optimized: Specifically engineered for high-boost applications with zero loss in horsepower. Extreme Heat Resistance: Built to withstand internal exhaust gas temperatures (EGTs) up to 1500°F. Durable Construction: Substrate is furnace-brazed to the mantle, preventing the internal core from shifting or breaking under heavy vibration. Specifications Vehicle Fitment: 2025+ BMW B58N Models (X3-40i, X3-M50i, X5-40i, X7-40i, 540i, 640i, 740i). Cell Density: 400 Cells Per Square Inch (CPSI). Catalyst Material: 304 Stainless Steel Substrate. Compliance: EPA Registered / 49-State Legal (Not CARB registered for California). Warranty: 5-Year/50,000-Mile on shell/ends; 2-Year/25,000-Mile on the catalytic core (Warranty void with "burble" tunes).

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

Vargas Billet CNC Valve Cover - Gold - BMW B58 Gen 1

T#:51848499

Part#: VTT-B58-BVC-GOLD

Ships in 10 Business Days

$ 1,879.99 USD

Add to Wish List

Qty

$ 1,879.99 USD

Add to Wish List

The VTT B58 Gen 1 Billet CNC Valve Cover in Gold is the ultimate functional upgrade for the BMW B58 engine.

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

T#:51672717

Part#: VTT-MAP-HARNESS

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Active Autowerke GESI Catted Downpipe - B58N

For Model Years 2024+

For Model Years 2024+ - Please call in with vin prior to purchase

T#:51320821

Part#: 11-062N

Ships in 10 Business Days

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

For the owner of a late-model BMW who demands a balance of high-end performance and sophisticated daily drivability, Active Autowerke offers the B58N Gen-3 GESI Catted Downpipe. Built with a focus on long-term reliability and environmental standard compliance, this downpipe features an EPA-registered GESI G-Sport catalytic converter. These 400-cell metallic substrates are furnace-braised to the mantle, offering outstanding resistance to thermal shock and vibration. The industrial-grade 304 stainless steel construction ensures the downpipe will withstand years of heat cycles without degrading. This system is a true "plug-and-play" solution that enhances the B58's deep, throaty exhaust note while keeping emissions levels in check and the dashboard clear of errors. Key Features: 49-State Legal: Features an EPA-registered catalyst that is fully OBD2 compliant (excludes vehicles registered in CA). Superior Durability: Constructed entirely from heavy-duty 304 stainless steel with a brushed finish. Proprietary Catalyst Loading: Precious metal technology ensures the reduction of harmful emissions and eliminates raw fuel odors. OEM+ Fitment: Meticulously test-fitted on a dedicated fixture to guarantee a perfect seal with factory turbo and exhaust connections. Comprehensive Kit: Available with an optional turbo flange gasket to ensure a fresh, leak-free installation. Specifications: Type: Signature Series Valved GESI Catted Downpipe. SKU: 11-062N. Catalyst Rating: Rated for high-output applications while maintaining operational efficiency. Hardware: Includes lower mounting brackets and necessary flex section. Vehicle Fitment (US Models Only): * 2025+ BMW X3 40i / X3-M50i (G45) 2025+ BMW X5 40i (G05 LCI) / X7 40i (G07 LCI) 2025+ BMW 540i (G60) / 740i (G70)

Show More Show Less

Hitachi Engine Camshaft Position Sensor - BMW S63M N63B/N63M/N63R S68...

T#:48850059

Part#: 13628697982

Ships in 6 Business Days

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

The camshaft position sensor communicates the position of the camshaft to the computer. This helps the computer to calculate proper spark and fuel control. If you're struggling with CELs, hard starts or no starts, stalling, and/or a rough idle, you may need to replace the cam position sensor.

Show More Show Less

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Vargas Billet Coolant Block-Off - BMW B58 Engine

T#:52094566

Part#: VTTFAB040BLKB58

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Engineered for precision and durability, the VTT-FAB-040 B58 Block-Off Flange is the definitive solution for managing oil and coolant paths during fabrication.

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results