BMW Engine Parts for BMW X Series G05 X5 (2019+)

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Designed with performance enthusiasts in mind, our Performance Ignition Service Kit is a plug-and-play upgrade for your BMW! This kit boosts spark energy and engine efficiency, featuring a full set of eight Turner Motorsport Performance Ignition Coils. Our coils provide a 10% increase in spark energy compared to stock ignition coils and are included in our lifetime replacement program for peace of mind. Additionally, the kit includes eight NGK 97506 spark plugs, which are one heat range colder for enhanced protection against pre-ignition and detonation, especially in tuned applications.

Turner Motorsport High Performance Ignition Coils - Set of Eight

Increased Performance: Produces up to 10% more spark energy output than stock! Performance Aesthetic: The attractive "Turner blue" coil housing includes a laser-etched resin Turner Motorsport logo. Plug & Play Upgrade: Exact fit for your N63B44T3 (N63B), S63B44T4 (S63M), or S68 (S68T). Lifetime Replacement: Backed by our Lifetime Replacement Program, protecting your purchase in the event of failure. NGK 97506 / SILZKBR8D8S Spark Plugs - Set of Eight

Fine wire, iridium-tipped center electrode Fine wire, platinum-tipped ground electrode Copper core aids in heat removal One heat range colder for N63B (N63B44T3), S63M (S63B44T4), and S68 (S68T). Upgrade your ignition system today with our Performance Ignition Service Kit and restore the power your engine deserves!

Note: Not all N63B and S63M applications use the same ignition coil. Many S63B44T4/S63M applications—including the F90 M5 and F91/F92/F93 M8—use the older "N Series" ignition coil architecture. If your N63/S63-equipped BMW utilizes the older "pencil style" ignition coil, you can find the Turner Motorsport Performance version HERE.

If your engine is throwing a misfire code, there's a good chance the ignition coil is on its way out. Ignition coils are key components in your engine's ignition system, responsible for generating the spark that fuels the combustion process. When they fail, you can experience weak or intermittent sparks, leading to misfires, decreased engine power, and poor overall performance.

If you’re looking to address ignition problems or simply upgrade your setup, consider our High-Performance Ignition Coils! Our ignition coils are engineered to deliver superior spark energy, ensuring smoother, more efficient combustion. Not only will they improve engine performance, but their vibrant blue design and TURNER branding will also give your engine bay a sleek, high-performance look.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features & Benefits:

Increased performance! Our performance ignition coils offer a much-needed increase in spark energy, granting your engine a stronger, more consistent spark. Direct plug-and-play upgrade for BMWs equipped with N63B44T3 (N63B), S63B44T4 (S63M), and S68 (S68T). The coil body is finished in our signature "Turner blue" and features a laser-etched, resin-coated Turner insignia. The spark plug boot is constructed from durable rubber and is pre-lubricated with dielectric grease for easy installation. When replacing your ignition coils, it's also a good time to change out those old spark plugs. Our Performance Ignition Service Kit includes these ignition coils and "one step colder" NGK spark plugs for a more comprehensive ignition system service.

Note: Not all N63B and S63M applications use the same ignition coil. Many S63B44T4/S63M applications—including the F90 M5 and F91/F92/F93 M8—use the older "N Series" ignition coil architecture. If your N63/S63-equipped BMW utilizes the older "pencil style" ignition coil, you can find the Turner Motorsport Performance version HERE.

Introducing the BMW N63/S63 Race Series High-Performance Con Rod Bearing Set by Automotive Components Limited. Elevate your BMW's performance with these precision-engineered con rod bearings, specifically designed for performance BMW engines.

Key Features:

Premium Quality: Crafted with the utmost precision and durability, this con rod bearing set ensures high performance and reliability for your BMW. Race Series Design: Engineered to meet the demands of race applications, these bearings are well-suited for high-performance driving scenarios. Enhanced Engine Protection: The bearings provide essential protection for your engine components, ensuring their longevity even under extreme conditions. Perfect Fit: Designed to seamlessly fit BMW N63 and S63 engines found in many newer BMWs, these bearings are a direct replacement for your stock components. Improved Performance: Experience enhanced engine performance and responsiveness, making it ideal for racing and high-performance driving. Upgrade your BMW with the Race Series High-Performance Con Rod Bearing Set from Automotive Components Limited. Enhance your vehicle's performance and enjoy peace of mind knowing your engine is protected by top-quality components.

Introducing the BMW B58 Race Series High-Performance Con Rod Bearing Set by Automotive Components Limited. Elevate your BMW's performance with these precision-engineered con rod bearings, specifically designed for performance BMW engines.

Key Features:

Premium Quality: Crafted with the utmost precision and durability, this con rod bearing set ensures high performance and reliability for your BMW. Race Series Design: Engineered to meet the demands of race applications, these bearings are well-suited for high-performance driving scenarios. Enhanced Engine Protection: The bearings provide essential protection for your engine components, ensuring their longevity even under extreme conditions. Perfect Fit: Designed to seamlessly fit the BMW B58 engine, these bearings are a direct replacement for your stock components. Improved Performance: Experience enhanced engine performance and responsiveness, making it ideal for racing and high-performance driving. Upgrade your BMW with the Race Series High-Performance Con Rod Bearing Set from Automotive Components Limited. Enhance your vehicle's performance and enjoy peace of mind knowing your engine is protected by top-quality components.

BMW B58 3.0L VAC Performance Coated Rod Bearing Kit

The BMW B58 3.0L VAC Performance Coated Rod Bearing Kit offers an exceptional upgrade for performance enthusiasts seeking superior reliability and durability. These bearings are crafted with precision and feature a high-quality coating that enhances their performance. Unlike conventional treated bearings, this kit includes a physical coating layer that combines excellent embeddability with dry-lubricant properties, making it ideal for BMW engines.

• Precision Engineering: Manufactured with high precision and repeatability for optimal performance.
• Advanced Coating: Features a physical coating layer for superior embeddability and dry-lubricant properties.
• Enhanced Tolerance: Designed to run well across engine tolerances, reducing typical failures associated with OEM bearings.
• Improved Cold Starts: Ideal for both street and race engines, providing reliable performance during cold starts.
• Performance Upgrade: Offers a significant upgrade over OEM bearings, enhancing engine reliability and longevity.

Introducing the ACL Race Series High-Performance Main Bearing Set, meticulously crafted for BMW B58 and S58 engines. Take your BMW’s engine durability and performance to the next level with these race-proven main bearings, designed to handle the demands of aggressive driving and high-RPM scenarios.

Built with ACL’s Duraglide tri-metal technology, this main bearing set ensures exceptional oil flow and resistance to wear, even in extreme conditions. Engineered for performance, this upgrade is a direct replacement for stock BMW main bearings, providing enhanced strength and longevity without compromising factory tolerances.

Key Features:

Race-proven design: Ideal for performance builds, this complete set delivers superior oiling and heat resistance, making it perfect for high-RPM use. Precision fitment: Engineered specifically for BMW’s B and S series engines, offering a reliable solution for common crankshaft bearing wear issues. Duraglide technology: Featuring tri-metal construction, including a copper-lead base and high-strength overlay, for improved oil retention and reduced friction. High-load capacity: Designed to withstand the rigors of spirited driving and competition, preventing distortion and wear during peak performance. Optimized for high performance: Eliminates tin flash plating, allowing for better bearing-to-housing contact and improved durability under extreme pressure. Whether you're rebuilding your BMW for the track or simply want to ensure reliable performance under demanding conditions, the ACL Race Series Main Bearing Set offers the perfect upgrade solution. Boost your engine’s reliability and extend its lifespan with this high-performance bearing set.