Dinan High Flow Drop-in Replacement Air Filter - G01/G02/G05/G06/G07/...

For 2019-2023 BMW X5/X6/X7 40i Dinan High Flow Drop-in Replacement Air Filter

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18236096

Part#: D401-0043

In Stock

12% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

12% off MSRP

$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Reduce your maintenance costs and increase your performance with Dinan's high-flow, washable, drop-in air filter! Using better breathing materials lets your engine make more power while not working as hard, giving you a reliable bump in engine performance! The air filters are a great alternative if a full intake system just is not possible at the moment, but no worries, Dinan has you covered!

Show More Show Less

Genuine BMW MAP Pressure Sensor - BMW N20 N26 N55 S55 N63 S63 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:539293

Part#: 13628644432

In Stock

6% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 153.99 USD

Add to Wish List

Qty

6% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 153.99 USD

Add to Wish List

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in your N55 engine's electronic control system. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU/DME). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion, efficiency, and ignition timing. Fits BMW Engines including: N20,N26,N55,N63,N63N,S55,S63N

Show More Show Less

VRSF B58 Charge Pipe Upgrade Kit - 2-Bolt Flange - 2020+ B58 Gen2 3.0...

For model years 2020+ with the Gen 2 B58 (B58TU)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:38655166

Part#: 10581040

Ships in 7 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Increase throttle response and decrease turbo lag with the VRSF Charge Pipe Upgrade for your BMW with a B58 engine. Every VRSF Charge Pipe is constructed from mandrel bent, T6061 grade aluminum including the flanges. Each flange is precision machined from CNC billet aluminum, including the throttle body, intercooler, and vacuum connections. After these are welded, they’re test-fitted on multiple jigs to ensure proper fitment and a reliable, leak-free connection. Each VRSF charge pipe is finished in a durable wrinkle black powder-coated finish that blends in perfectly with the engine bay. We also include one plugged 1/8' NPT bung that can be used for water injection, boost leak testing, or as a boost source. The OEM charge pipe is prone to failure at both stock and tuned boost levels which is why we include everything necessary to replace your flimsy OEM chargepipe including high-quality, 4-ply silicone couplers as well as stainless steel t-bolt clamps.

Show More Show Less

BMW B58 3.0L Charge Pipe - Wrinkle Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28604064

Part#: 15-007

Ships in 1-2 days

5% off MSRP $ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 284.99 USD

Add to Wish List

Qty

5% off MSRP

$ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 284.99 USD

Add to Wish List

BMW B58 3.0L Charge Pipe - Wrinkle Black addresses common issues with the factory plastic charge pipe, which is prone to blow-outs and can lead to engine limp mode and performance loss. This high-performance upgrade by Active Autowerke features a robust all-aluminum construction that enhances durability and prevents structural failure. The CNC-machined connection ensures a precise fit and reliable seal at the throttle body. With wrinkle black powder coating for a sleek, OEM appearance, this charge pipe improves throttle response and performance, making it a superior choice for your BMW.

Replaces the factory plastic charge pipe with durable all-aluminum construction
Prevents blow-outs and engine limp mode issues
CNC-machined connection for a precise and reliable fit
Consistent diameter tubing enhances performance
Increases throttle response and reduces throttle lag
Retains factory BMW o-ring seal for a secure fit
Includes two raised bosses for Water/Methanol Injection (WMI) nozzles
Wrinkle black powder-coated for a sleek, OEM look
Comes with high-quality silicone couplers and stainless clamps for easy installation
Ideal upgrade for B58TU-equipped BMW models to safeguard against charge pipe failure

Show More Show Less

Eventuri Black Carbon Intake System - F95 X5M, F96 X6M, G09 XM, G05/0...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21472896

Part#: EVE-X56M-CF-INT

Ships on Jul 23, 2026

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

The Eventuri intake is meticulously tested both on the dyno and in real-world driving conditions, ensuring it delivers genuine performance gains without compromise.

BMW N63 4.4L BMC Performance Air Filter - Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2393415

Part#: FB01103

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

BMW N63 4.4L BMC Performance Air Filter - Set is designed to enhance engine performance by replacing the OEM air filter with a high-quality upgrade. This panel/cylindrical air filter fits directly into the vehicle's original airbox, offering improved air flow and filtration efficiency. Made from advanced materials, it provides superior filtration, capturing impurities as small as 7 microns, compared to the 10 microns of the standard OEM filter.

Enhanced Air Flow: Improves engine breathing and performance by allowing more air to flow into the engine.
Superior Filtration: Captures particles as small as 7 microns, offering better protection compared to the OEM filter.
Increased Efficiency: Optimizes the air-to-fuel ratio for improved engine efficiency and power output.
Direct Replacement: Fits seamlessly into the original airbox without the need for modifications.
Long-Term Durability: Made from high-performance materials for extended lifespan and reliable performance.

Show More Show Less

CTS Turbo Charge Pipe Upgrade - B58 G-Chassis/A90 Supra 3.0L ...

For Vehicles 2019+ with updated B58 engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5802163

Part#: CTS-IT-349

Ships in 8 Business Days

Sale - Save 15% $ 269.99

This product was last offered at the strikethrough price on
06-25-2026

$ 229.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 269.99

This product was last offered at the strikethrough price on
06-25-2026

$ 229.49 USD

Add to Wish List

CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58 engines in the G-chassis and A90 Toyota Supra 3.0T. The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. This charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part. You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level. Features: Precision CNC machined flanges for perfect fitment T6061 Mandrel-Bent Aluminum Pipe Robust Black Powdercoat Finish 4 ply Silicon Connectors Stainless Steel Clamps and Hardware 2 x 1/8″ NPT Water-Methanol Bungs with plugs Replaces BMW Part number 13718651066 (with 2 bolts on throttle body)

Show More Show Less

Genuine BMW T-Map Sensor - 13628637900

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:222870

Part#: 13628637900

Ships in 1-2 days

9% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 147.99 USD

Add to Wish List

Qty

9% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 147.99 USD

Add to Wish List

Rough idling and slow acceleration are 2 common signs of a failing Tmap sensor. Take the time to replace this to get your car running at 100% again.

Genuine BMW Crank Case Ventilation Valve - N63 4.4L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:216971

Part#: 11158647299

In Stock

10% off MSRP $ 208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Limited Qty Sale

Add to Wish List

Qty

10% off MSRP

$ 208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Limited Qty Sale

Add to Wish List

Genuine Bmw Connecting Line - 11158647299

Intake Resonator Delete Pipe - G01/G02, G05/G06/G07, G30/G32 B58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:53326245

Part#: 058917LA01

In Stock

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

From the factory, B58-equipped BMWs are designed to be refined and quiet. To achieve this, BMW equipped the intake tract with a bulky plastic resonator designed to cancel out the natural induction sounds of the engine. While great for a silent commute, it robs the enthusiast of the satisfying "whoosh" noise and turbo spool that make the B58 one of the most exciting engines on the market today.

Our Intake Resonator Delete Pipe is the simplest, most cost-effective way to bring that personality back to your BMW without shelling out hundreds for a full intake system. By deleting the OEM intake resonator assembly, you'll experience a drastic increase in induction noise and blow-off sounds. This hose also removes the internal chambers that create turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger. In short, this fully-reversible delete pipe is a must-have upgrade for owners who wish to keep their factory airbox while dramatically increasing induction noise.

Features:

Increases audible induction noise and turbocharger "blow-off" sounds
Removes the internal chambers that cause turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger
Precision-engineered to look like it belonged there from the factory
Perfect for those who want better sound and flow while keeping the superior filtration and heat-shielding of the OE BMW airbox
Design:

Durable four-ply fiber-reinforced silicone construction matches the exact dimensions of the factory air intake elbow (13717643302), ensuring a perfect fit
T304 stainless steel German-style worm gear hose clamps ensure a consistent seal and optimal corrosion resistance
Fully-reversible - no permanent modifications necessary!
Product Development:

Our B58 Intake Resonator Delete Pipe was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less

CSF Racing Performance "Super Manifold" - BMW G20/22 G30 G01/02, Toyo...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! CARB certified for sale in all 50 states

T#:2498426

Part#: 8200

EO#: D-770

Ships in 3 Business Days

$ 4,299.00 USD

Add to Wish List

Qty

$ 4,299.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

CSF B58 Thermal Rejection Competition Spacer - BMW G20/22 G30 G01/02,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Designed to be used with CSF's B58 Super Manifold (CSF #8200 - T#2498426 or #8200B - T#9868813)

T#:8154081

Part#: 8200S

Ships in 1 Business Day

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

CSF is continually updating and adding new products In an effort to help customers achieve the highest level of competition in motorsports. CSF is pleased to release the latest B58 performance product. The CSF B58 Thermal Rejection Competition Spacer (CSF #8200S). The CSF B58 Thermal Rejection Competition Spacer is the next level upgrade for the B58 Super Manifold (CSF #8200 - ES4389640). Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Spacer Height = 6.5mm Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Can withstand temps up to 1100°F and is as strong as Aluminum Self-Sealing and do NOT require gaskets, silicon products, or sealing agents of any kind. Tested on @peppa_aka_skull’s (1000HP) A90 Supra by Visconti Tuning Includes installation hardware and instructions Highly recommended for Drag/Roll-Racing Applications where vehicles typically sit in staging lanes in-between racing Limited Lifetime Warranty Will NOT work with the OEM Manifold The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The B58 Super Manifold is made from Billet Aluminum and 100% Tig Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. The CSF Thermal Rejection Competition Spacer was designed for vehicles competing in motorsports who demand the absolute best cooling in order to gain a competitive edge. With that being said, there are significant advantages to adding this spacer upgrade to any vehicle with the CSF B58 Super Manifold installed.

Show More Show Less

Genuine BMW Manifold Absolute Pressure (MAP) Sensor - F8X F9X F85/86 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599874

Part#: 13628644433

Ships in 1-2 days

Sale - Save 6% $ 147.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.85 USD

Add to Wish List

Qty

Sale - Save 6%

$ 147.99

This product was last offered at the strikethrough price on
06-25-2026

$ 139.85 USD

Add to Wish List

The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW G20 G29 G05 G11 A90 Supra B58TU ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fits Gen 2 (B58TU) engine only

T#:6924303

Part#: 090762ECS09

In Stock

Sale - Save 5% $ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

Qty

Sale - Save 5%

$ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

BMW Drop-In Air Filter - G30 550i G11 750i/xi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586059

Part#: FB930/01

In Stock at Vendor

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

FTP Motorsport Charge Pipe - Red - G20 G29 G05 G11 & A90 Supra B58TU ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:840347

Part#: SG71444-R

Special Order: No Guaranteed ETA

$ 275.99 USD

Add to Wish List

Qty

$ 275.99 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement - Replaces BMW p/n 13718651066 Larger than stock diameter for increased charge-air volume

Show More Show Less

BMC Drop-In Performance Air Filter - Single Filter - G01/F97 G30/F90 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584728

Part#: FB929/20

Back Ordered

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

BMC air filters are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low-viscosity oil covered with an epoxy-coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit. Replaces BMW P/Ns: 13718577170, 13718577171,13718691835

Show More Show Less

FTP Motorsport Charge Pipe - Black - G20 G29 G05 G11 & A90 Supra B58T...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586884

Part#: SG71444

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum Finish - Ge...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:25109031

Part#: 8400NEO

Ships in 3 Business Days

$ 7,399.00 USD

Add to Wish List

Qty

$ 7,399.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum Finish - Ge...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:23648670

Part#: 8400

EO#: D-770

Ships in 3 Business Days

$ 5,599.00 USD

Add to Wish List

Qty

$ 5,599.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

Performance Charge-Air Cooler "Super Manifold" - Thermal Black Finish...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:9868813

Part#: 8200B

Ships in 3 Business Days

$ 4,599.00 USD

Add to Wish List

Qty

$ 4,599.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle. CSF's Testing Results: Faster recovery of intake air temperatures ~30°F reduction of intake air temperatures (IAT’s) compared to OEM Less pressure drop compared to OEM core Puts less stress on the turbo system, allowing more boost to be made at higher targets Avoided going into limp mode after prolonged demanding conditions, simulating motorsports use On a stage 2 car with bolt-on upgrades, making ~400whp, comparing dyno run 19 between CSF and OEM, an increase of ~26whp and 11wtq were achieved The performance increase and delta between CSF and OEM will be bigger as power is increased in the vehicle Features & Specifications: High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core - Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows) lower pressure drop across the system Easy Access to Oil Filter Housing Integrated Sensor Pad - Three 1/8" NPT Ports Included Optional Fuel Rail - Adds Port Injection Capabilities! Individual Port Injection Bungs on Each Cylinder Runner - Arrives Pre-Plugged Integrated Nitrous/Meth Ports - 1/8" NPT ports on each cylinder runner Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection Individual 1/8" NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System Plug-and-Play design, Requiring No Modifications to Install Includes Hardware and Installation Kit with Picture Diagrams Containing 28 Different Parts for Easy Installation Can be Used With OEM or Aftermarket Engine Covers (with OEM Connections) Comes Finished in Thermal Black Heat Dispersion Coating Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Looking to get the most out of this intake? We suggest pairing this with CSF's B58 Thermal Rejection Competition Spacer! (See T#8154081)

Show More Show Less

CSF Racing "Race X" Intake Manifold - Thermal Black Finish - Gen 2 B5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:23648671

Part#: 8400B

Ships in 3 Business Days

$ 5,995.00 USD

Add to Wish List

Qty

$ 5,995.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

Rein Cloth Braided Fuel/Vacuum Hose - Black - 20 Meter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:378471

Part#: N203531-20

Ships in 4 Business Days

Sale - Save 5% $ 363.52

This product was last offered at the strikethrough price on
06-29-2026

$ 345.34 USD

Add to Wish List

Qty

Sale - Save 5%

$ 363.52

This product was last offered at the strikethrough price on
06-29-2026

$ 345.34 USD

Add to Wish List

Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID

Rein Silicone Vaccum Hose - Black - 65 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:378475

Part#: 5173125797120BLK

Ships in 4 Business Days

Sale - Save 5% $ 175.99

This product was last offered at the strikethrough price on
06-29-2026

$ 166.75 USD

Add to Wish List

Qty

Sale - Save 5%

$ 175.99

This product was last offered at the strikethrough price on
06-29-2026

$ 166.75 USD

Add to Wish List

Replace your cracked or frayed vacuum lines. 3.5mm

Performance Charge-Air Cooler "Super Manifold" - DLC Neo Chrome Finis...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! This is a special order finish. Lead time is 5-6 weeks.

T#:25042501

Part#: 8200NEO

Ships in 3 Business Days

$ 6,099.00 USD

Add to Wish List

Qty

$ 6,099.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

Genuine BMW Charge Air Induction Tract - 13718601684

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:222876

Part#: 13718601684

Ships in 1-2 days

7% off MSRP $ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 523.99 USD

Add to Wish List

Qty

7% off MSRP

$ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 523.99 USD

Add to Wish List

Genuine BMW air induction tract. Runs from the turbo to the throttle body

Genuine BMW Throttle - 13547619008

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:194738

Part#: 13547619008

Ships in 1-2 days

7% off MSRP $ 793.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 739.99 USD

Add to Wish List

Qty

7% off MSRP

$ 793.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 739.99 USD

Add to Wish List

Genuine Bmw Throttle

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:380988

Part#: SNO210

In Stock

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369781

Part#: 30-3000

In Stock

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556344

Part#: 60500

In Stock at Vendor

$ 312.99 USD

Add to Wish List

Qty

$ 312.99 USD

Add to Wish List

Stage 3 Boost Cooler (Direct Injection) - Braided Line

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

AEM Water/Methanol Injection System

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815164

Part#: 30-3326

In Stock

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW X Series G07 X7 (2019+)

Sub-Categories

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results