Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

BMW B58 3.0L Charge Pipe - Wrinkle Black addresses common issues with the factory plastic charge pipe, which is prone to blow-outs and can lead to engine limp mode and performance loss. This high-performance upgrade by Active Autowerke features a robust all-aluminum construction that enhances durability and prevents structural failure. The CNC-machined connection ensures a precise fit and reliable seal at the throttle body. With wrinkle black powder coating for a sleek, OEM appearance, this charge pipe improves throttle response and performance, making it a superior choice for your BMW.

• Replaces the factory plastic charge pipe with durable all-aluminum construction
• Prevents blow-outs and engine limp mode issues
• CNC-machined connection for a precise and reliable fit
• Consistent diameter tubing enhances performance
• Increases throttle response and reduces throttle lag
• Retains factory BMW o-ring seal for a secure fit
• Includes two raised bosses for Water/Methanol Injection (WMI) nozzles
• Wrinkle black powder-coated for a sleek, OEM look
• Comes with high-quality silicone couplers and stainless clamps for easy installation
• Ideal upgrade for B58TU-equipped BMW models to safeguard against charge pipe failure

M7 Speed Silicone Intake Hose for N14 Turbocharged MINIs

Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.

M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.

Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.

Key Features:

• Direct OE replacement part
• Superior durability
• Improved airflow
• Virtually unlimited service life
• Retains stock PCV connection location and size
• Easy DIY installation
• Available in four standard M7 colors
• Dimensions: 2.75” (70mm) ID at the MAF sensor, 1.97” (46mm) ID at the turbo inlet

Upgrade your Mini's performance with the M7 Speed COLD SIDE Intercooler Elbow Kit paired with the HOT SIDE Charge pipe in striking BLACK color. This comprehensive intercooler pipe kit optimizes airflow, ensuring maximum flow and minimal pressure drop from the turbo to the throttle body. Crafted from premium four-ply fabric reinforced 100% silicone material, this kit not only boosts power and throttle response but also enhances the under-hood aesthetics of your vehicle. By replacing OE parts, it eliminates high boost failures and removes the OE hose side muffler and cold side sound chamber for improved throttle response and increased mid-range to top-end power. The kit includes six high-quality lined stainless steel clamps, providing a complete solution for installation using basic hand tools.

• Maximizes airflow for increased power
• Improves throttle response and mid-range to top-end power
• High-quality four-ply fabric reinforced 100% silicone material
• Enhanced under-hood appearance
• Eliminates OE hose side muffler and cold side sound chamber
• Complete kit for easy installation with basic hand tools

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

M7 Pre-Intercooler Charge Pipe for MINI

Upgrade your MINI's performance with the M7 Pre-Intercooler Charge Pipe, a silicone hose designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. Unlike OEM parts that feature restrictive piping and baffles, this charge pipe ensures uninterrupted airflow for enhanced turbocharger sound and performance.

Benefits:

• Smooth inner walls and mandrel bends allow uninterrupted airflow
• Enhances turbocharger sound for a more exhilarating driving experience
• Dyno-tested gains of 3.6 horsepower and 11.3 ft-lb of torque at the wheels
• Available in BLACK, RED, and BLUE to complement your MINI's engine bay
• Proudly made in the USA for quality assurance

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.

In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!

Specs and Features:

• Aluminum Construction
• Black Powder Coating
• 3" Diameter
• Tial BOV Flange
• CNC Machined Throttle Body Flange
• Dual 1/8" NPT Bungs
• High Pressure T-Bolt Clamps
• All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.

M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side

The MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side is an essential component for optimal performance. Crafted with precision and quality materials, this lower intercooler elbow ensures efficient airflow and durability for your MINI.

Key Benefits:

• Enhances airflow for improved engine performance
• Constructed with quality materials for durability
• Precision-engineered for a perfect fit
• Easy installation with no modifications required

Upgrade your MINI's performance with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side. This essential component enhances airflow, improving engine performance and ensuring durability. With its precision engineering and quality materials, installation is a breeze, requiring no modifications to your MINI.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

VTT is proud to offer the very best Cold Side charge pipe solution for the BMW E Series N54 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi.  They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat.  Another huge benefit is only TWO connections which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off.

This N54 pipe has a flange installed to support a Turbosmart BOV.

This is the EASIEST N54 charge pipe on the market to install hands down. Install takes about half an hour even if you are inexperienced with working on your own car, can take as little as 15-20 minutes if you have had it apart a few times.

The kit includes:

VTT Cold Side Silicone Charge pipe

2 VTT Branded CNC adapters to mount the map sensor, and a methanol bung

1 VTT Branded CNC adapters for the TB inlet

2 VTT branded T-Bolt Clamps

1 1/8 NPT port is included in the charge pipe for methanol