MINI (F5X) BLACKLINE Performance Engine Cap Set (Oil Cap / Coolant Ca...

T#:3121419

Part#: F5XECS

Ships in 4 Business Days

$ 107.00 USD

Add to Wish List

Qty

$ 107.00 USD

Add to Wish List

BMW N12 N14 Oil Pump Complete Kit

T#:19627055

Part#: NS14OPK

Ships in 1 Business Day

$ 584.99 USD

Add to Wish List

Qty

$ 584.99 USD

Add to Wish List

Weistec BMW S55 Billet Oil Filter Cap - Red

T#:22690730

Part#: 01-555-02060-4

Ships in 1 Business Day

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Direct replacement/bolt in for the S55 engines. CNC machined 6061 aluminum Anodized in Red

Engine Oil Pump

T#:13200568

Part#: 11417823009

In Stock

Sale - Save 38% $ 807.99

This product was last offered at the strikethrough price on
04-17-2026

$ 500.00 USD

Add to Wish List

Qty

Sale - Save 38%

$ 807.99

This product was last offered at the strikethrough price on
04-17-2026

$ 500.00 USD

Add to Wish List

N20/N26 Mishimoto Baffled Oil Catch Can

T#:389788

Part#: MMBCCN20N2612CB

In Stock at Vendor

$ 278.95 USD

Add to Wish List

Qty

$ 278.95 USD

Add to Wish List

il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Oil Filter Housing And Heat Exchanger - B46, B48

2X Entries Into Our F80 M3 Sweepstakes

T#:2438649

Part#: 11428596283

In Stock

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

OE Cross References: 11428585624 11428596283

Oil Filter Housing Cap - E60 E63 E65 E53 E70 With N62 /n73 Engine ...

2X Entries Into Our F80 M3 Sweepstakes

T#:12151732

Part#: 11427521353

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Replace your stripped or damaged oil filter cap with this Genuine BMW part. The oil filter cap on N62 and N73 engines is made of black plastic and can become cracked or stripped when replacing the oil filter. Guaranteed fitment Manufactured to OE oil filter cover dimensions for easy bolt-on installation and reliable sealing High-strength heat and oil-resistant materials ensures long lifespan Quality control at each step of production 24 Month Unlimited Mileage Warranty

Show More Show Less

AGA Tools N63 Updated Rear Engine Cover - BMW N63 (2008-2019) ...

T#:26404835

Part#: AGA-N63-6061-URC

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

The BMW N63 rear cover is a metal plate that covers the rear of the BMW N63 V8 engine. It helps to seal the engine and prevent oil leaks. Over time, the original sealing gasket becomes brittle and does not seal, causing leaks between the engine and transmission bell housing. This repair can be very expensive and is usually misdiagnosed for a rear main seal. The AGA Updated N63 Rear Cover is an inexpensive alternative, made of 6061 billet aluminum. This kit includes the rear cover, viton o-ring, alcohol wipe, scotch-brite pad and o-ring grease. BMW Part # 11142446298 & 11148483799 BMW Service Bulletin (SIB) 11 09 16

Show More Show Less

Oil Filter Cap

2X Entries Into Our F80 M3 Sweepstakes

T#:45723148

Part#: 11427615389

Ships in 2 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The oil filter housing does far more than just hold the filter—it’s a vital piece that directs oil where it needs to go throughout the engine. With age, the housing and its gaskets can warp, crack, or leak, leading to oil loss, a messy engine bay, and even potential coolant contamination. Ignore it, and that small leak can turn into serious engine trouble. Replacing your oil filter housing delivers: * **Leak-free reliability** – Prevents oil and coolant seepage before it escalates. * **Proper flow** – Maintains clean, consistent oil circulation through the engine. * **Confidence restored** – No more puddles, no more guesswork—just dependable performance. Refresh the housing, stop the leaks, and keep your engine running strong without the worry of hidden damage.

Show More Show Less

Iwis Oil Pump Chain - E53

T#:377366

Part#: 11417576916

Ships in 1 Business Day

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Chain that drives the oil pump

Oil Pickup Tube - N54/N55

2X Entries Into Our F80 M3 Sweepstakes

T#:50031883

Part#: 11417590740

Ships in 1 Business Day

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

Ensure proper engine lubrication with a replacement Oil Pan Suction Pipe / Baffle, a vital internal component responsible for maintaining consistent oil pressure under all driving conditions. The suction pipe supplies oil from the pan directly to the oil pump, while the baffle manages oil movement during acceleration, braking, and cornering. With age and mileage, seals can harden and components can wear or crack, increasing the risk of oil pickup issues—especially on higher-performance or aggressively driven vehicles. Any disruption in oil supply can lead to pressure loss and accelerated engine wear. Manufactured to OE specifications, this suction pipe and baffle assembly is designed for correct fitment, sealing, and oil flow. It installs directly in place of the factory unit and is strongly recommended when servicing the oil pan or performing related engine work. Key Benefits: Maintains a consistent oil supply to the oil pump Helps prevent oil starvation during high-load or spirited driving Replaces aging or worn factory components Direct-fit design for straightforward installation Ideal preventative maintenance during oil pan or engine service

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

T#:588633

Part#: OILVALVE-RED

Ships in 2 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

Oil Filter Cap

2X Entries Into Our F80 M3 Sweepstakes

T#:381080

Part#: 11427615389

In Stock

$ 31.99

This product was last offered at the strikethrough price on
05-07-2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Secures the oil filter to the filter housing

Mishimoto Performance Oil Cooler - E60 M5, E63/64 M6 S85 5.0L ...

T#:5282875

Part#: MMOC-E60-06

In Stock at Vendor

$ 714.99 USD

Add to Wish List

Qty

$ 714.99 USD

Add to Wish List

After over a decade of use, some of the E60 M5 & E63/64 M6 components have begun to show their age. The factory engine oil cooler is a common leak point on the E60, typically from failed O-rings or cracked weld points. In addition, the location of the front-mounted cooler increases the chance of damage from road debris and general clogging of external fins, resulting in reduced cooling efficiency. That, combined with the high-strung engine and hefty chassis, means oil temperatures tend to rise during aggressive driving. That's why Mishimoto's engineering team set out to remedy both issues with this performance oil cooler. Drawing on their vast experience with BMWs and the latest in engineering tools, Mishimoto's team was able to create a direct-fit replacement oil cooler with substantial improvements in both durability and cooling efficiency. The Mishimoto Performance Oil Cooler features a robust bar-and-plate core, which provides improved durability and aids in heat rejection. The core utilizes a strategic fin design which provides a 41% increase in external fin surface area and a 30% increase in internal fin surface area to help draw heat out of the oil and dissipate it into the air. This oil cooler features CNC-machined inlet/outlet ports and includes new OEM O-rings for a seamless and leak-free installation. This cooler is finished in a silver powder coat, ensuring long-term durability and corrosion resistance. And, as with all BMW performance products, this oil cooler includes the signature Mishimoto Lifetime Warranty. Fits 2006-2010 BMW E60 M5 / E63 M6 / E64 M6* (*Requires minor trimming of plastic OEM oil cooler shrouding) Replaces failure-prone factory oil cooler and provides improved cooling performance 40.3% increase in core volume for efficient cooling Robust bar-and-plate core provides improved pressure tolerance and durability 41% increase in external fin surface area for improved heat transfer 30% increase in internal fin surface area draws heat out of oil quickly and efficiently CNC-machined inlet/outlet mates perfectly with stock oil cooler lines Includes OEM oil line O-rings Durable silver powder coated finish provides optimal corrosion resistance Patent Pending Mishimoto Lifetime Warranty Included: Mishimoto Performance Oil Cooler Oil Line O-rings Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Oil Pan Assembly - E6X

2X Entries Into Our F80 M3 Sweepstakes

T#:592768

Part#: 11137574532

Ships in 1 Business Day

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Oil pan assembly. Comes with hole for oil level sensor and new drain plug hole.

AAF Oil Pan Baffle - E46 M54

T#:7608845

Part#: 11652

In Stock at Vendor

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's own M54 E46 Oil Pan Baffle. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. This baffle keeps the oil at the pick up better than others on the market. This pan features a tight fit with an extra tab on the front to keep oil from exiting under braking. Six gated holes control oil slosh in the sump. A must have for all track cars. Features and Benefits Track-proven to prevent oil starvation Directional trap door baffling completely that closes off the oil pump pickup for maximum protection against oil starvation during turning or acceleration Baffle plate with drain-back slots help accelerate return of oil to the bottom of the sump while also preventing oil slosh and reducing oil consumption Reduces the risk of oil starvation when oil levels are low Works with the factory cast aluminum oil pan, which is considered a structural member of the engine block and is less prone to failure or leaking than aftermarket sheet metal pans Light-weight aluminum construction Made In the USA **Note: Requires welding to install. Photos of installed baffle for reference.

Show More Show Less

AAF M20 Oil Pan Baffle (BAFFLE ONLY) - E30

T#:7593089

Part#: 11619

In Stock at Vendor

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.

Show More Show Less

Oil Filter Cap 2014-2019

2X Entries Into Our F80 M3 Sweepstakes

T#:55245861

Part#: 11428575907

Ships in 1 Business Day

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

OEM Oil Cooler - E60 M5, E63 M6

T#:46774

Part#: 17222282499

Ships in 1 Business Day

$ 779.77

This product was last offered at the strikethrough price on
08-17-2026

$ 648.71 USD

Add to Wish List

Qty

$ 648.71 USD

Add to Wish List

This is the OEM Behr engine oil cooler for E60 M5 and E63 M6 with the S85 V10 engine. On the S85 engine it is critical to keep the oil temperatures as low as possible. Higher oil temperatures can lead to failures of the variable valve timing system and engine bearings. If the cooling capacity of your oil cooler is compromised in any way we recommend replacing the unit to avoid future expensive repairs.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

URO Oil Filter Housing - With Cap

2X Entries Into Our F80 M3 Sweepstakes

T#:640564

Part#: 11428683206

Ships in 1 Business Day

$ 305.99 USD

Add to Wish List

Qty

$ 305.99 USD

Add to Wish List

The aluminum oil filter housings can crack causing oil leaks which leads to a mess and possible engine damage. This Bremmen replacement unit has the oil housing, the oil cooler, sensor and gaskets to get your car sealed up and working properly again all in one go!

Show More Show Less

Engine Oil Thermostat- E90 335i, E89 Z4 35i, E93 335i/335is ...

2X Entries Into Our F80 M3 Sweepstakes

T#:33446276

Part#: 11427573212

Ships in 1 Business Day

$ 143.99 USD

Add to Wish List

Qty

$ 143.99 USD

Add to Wish List

An engine oil thermostat allows oil to bypassing the cooler until the oil has reached its minimum operating temperature.

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Pro GUARD D2 Oil Filter 4 Pack - M50 M52 M54

T#:557622

Part#: 44-LF022-MB

In Stock

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Engine Oil Thermostat

2X Entries Into Our F80 M3 Sweepstakes

T#:15445596

Part#: 11427520214

Ships in 1 Business Day

$ 175.99 USD

Add to Wish List

Qty

$ 175.99 USD

Add to Wish List

If you are looking to retrofit an oil cooler to your BMW, this adapter is absolutely necessary.

M7 Black Billet Aluminum Updated Oil Catch Can Kit - N18 Engine - Red...

T#:17339413

Part#: 56-310316-02

Ships in 3 Business Days

Sale - Save 5% $ 206.99

This product was last offered at the strikethrough price on
08-31-2026

$ 196.22 USD

Add to Wish List

Qty

Sale - Save 5%

$ 206.99

This product was last offered at the strikethrough price on
08-31-2026

$ 196.22 USD

Add to Wish List

R55-R59 Oil Catch Can Kit for N18 MINI Engines

Introducing the newly updated R55 through R59 Oil Catch Can kit for MINIs equipped with the N16 or N18 engine. This kit includes a "designed-to-fit" stainless steel bracket, mounting hardware, and pre-assembled hoses for easy installation—no drilling or special tools needed. Note: This kit has been redesigned to fit directly behind the outlet of the airbox on the firewall, using the factory tab located on the firewall.

Despite skepticism from "forum experts and social hysteria," an Oil Catch Can (OCC) is essential. Many MINI owners suffer from carbon buildup on their intake valve due to oil being recycled through the intake tract. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup, preventing performance-hindering oil film and sludge. Direct injection in 2007 & up MINIs exacerbates the issue, leading to oil blow-by burning onto intake valves, resulting in power loss and expensive repairs.

By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures optimal engine performance. Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets, installation is super easy.

Features:

Pre-assembled hose assemblies
Stainless steel bracket and mounting hardware
Eliminates intake tract oil contamination and intake valve damage
Prevents premature sensor failure
Maintains engine performance at peak levels
Carbon Fiber canister with billet bright aluminum top and bottom

The M7 Oil Catch Can is not only functional but also a work of automotive performance ART! It features a 100% carbon fiber housing with CNC machined billet aluminum top and bottom, adding a sharp look to your engine compartment.

All hoses, brackets, clamps, necessary fittings, and easy-to-follow detailed step-by-step instructions are included, along with an oil drain plug and an easy-to-view sight tube. The sight tube allows you to monitor the oil level in the can. The hoses are high-quality "Made in the USA" automotive grade, designed to withstand the rigors of the under-hood environment without degradation.

Show More Show Less

Performance Oil Cooler - BMW G8X M3 M4

T#:15544955

Part#: MMOC-G80-21SL

In Stock at Vendor

$ 776.99 USD

Add to Wish List

Qty

$ 776.99 USD

Add to Wish List

Keep your 2021+ BMW M3/M4 cool and collected with the Mishimoto 2021+ BMW M3/M4 performance oil cooler. Much like their predecessors, the G8X M3 and M4 were designed with efficiency in mind. This can be a double-edged sword, as the optimally arranged engine bay has components placed in precarious positions. Most notably, the oil cooler is placed on the undercarriage, parallel to the road's surface. This placement increases air flow and uses aerodynamics to pull air through the core, but it also makes the stock cooler vulnerable to scrapes, bumps, and other road hazards. With this in mind, the engineers at Mishimoto set out to design a robust G8X oil cooler to keep your M3 or M4 running cool on and off the track. We started by swapping the stock tube-and-fin cooler for a bar-and-plate with CNC-machined end tanks. Our cooler boasts a 35.7-percent thicker core and a 41-percent increase in core volume for superior cooling efficiency. Our cooler fits directly in place of the stock unit and retains the stock seals and bash guards for optimal airflow and additional protection. The Mishimoto performance oil cooler for the 2021+ BMW G8X M3/M4 includes everything needed for installation and, as with all Mishimoto products, it's protected by the Mishimoto Lifetime Warranty for a lifetime of protection and cooling. Product Features: Direct fit for the 2021+ BMW G8X M3/M4 Full aluminum TIG-welded construction 41-percent increase in core volume and 35.7-percent thicker core than stock for improved cooling efficiency Robust bar-and-plate core provides superior pressure tolerance and durability Retains stock seals for optimal air flow from fresh air ducts Retains bash guards to protect cooler from bumps and curbs Silver powder coated finish for maximum corrosion resistance No cutting or modifications required Includes everything needed for installation Mishimoto Lifetime Warranty

Show More Show Less

Mishimoto Performance Engine Oil Cooler - F10/90 M5, F06/12/13 M6, G1...

T#:6258386

Part#: MMOC-F10-12SL

In Stock at Vendor

$ 887.99 USD

Add to Wish List

Qty

$ 887.99 USD

Add to Wish List

The BMW M5 power and handling statistics are completely mind-blowing for a car tipping the scales at well over two tons. The S63 twin-turbo V8 is underrated from the factory and responds well to tuning and bolt on modifications. Calling it the ultimate super sedan would not do this car justice, it’s just that good. But every amazing automobile must have an Achilles’ heel, right? Some investigation into this model told us that enthusiasts were seeing elevated oil temperatures during track driving conditions. Our team set out to create a replacement, high-performance oil cooler that could handle the rigors of extreme driving conditions and the abuse of daily commuting. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. Direct fit for 2012+ BMW M5/M6 models CNC-machined billet aluminum end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Mishimoto Lifetime Warranty Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. Direct fit for 2012+ BMW M5/M6 models CNC-machined billet aluminum end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Mishimoto Lifetime Warranty Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty

Show More Show Less

Engine Oil Pan Gasket - E82 E9X E60 E83 E70 Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:24145944

Part#: 11137548031

In Stock

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

High-quality replacement gasket for fixing oil pan gasket leaks.

MINI R56 NM Billet Catch Tank - N14 Engine

T#:26305130

Part#: NM.498855

Ships in 2 Business Days

$ 419.00

This product was last offered at the strikethrough price on
09-22-2026

$ 398.99 USD

Add to Wish List

Qty

$ 398.99 USD

Add to Wish List

Upgrade your Mini's performance and durability with the NM Engineering Catch Tank. Machined from billet 6061 aluminum alloy and anodized for added surface durability, this catch tank effectively traps oil and moisture from blow-by gas, preventing carbon and sludge buildup in crucial engine components. Enjoy these benefits:

Billet aluminum construction ensures durability.
Prevents carbon and sludge buildup in the turbo, intake system, and engine.
Easy disassembly for thorough cleaning and servicing.
Patent Pending Locking Clip system for secure installation.
Includes block-off plug for rear PCV port.
Compatible with N14 engine applications.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Red Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641120

Part#: OILCAPRED1

In Stock

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Dual BMS Turbo Double Baffled Oil Catch Can Kit - Vac & Boost Side - ...

T#:21045512

Part#: BDCC-N54-535

Ships on Oct 27, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum

Show More Show Less

URO Oil Pan

2X Entries Into Our F80 M3 Sweepstakes

T#:640378

Part#: 11131432703

Ships in 1 Business Day

$ 357.99 USD

Add to Wish List

Qty

$ 357.99 USD

Add to Wish List

Replace your cracked or damaged oil pan with this URO part that fits models with the M52tu, M54 and M56 engines. The BMW aluminum oil pans can be damaged by road debris or even by putting the drain pan bolt in incorrectly.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2003-2005 E85 BMW Z4 2.5i Z4 3.0i -M54

Show More Show Less

Rein Oil Pan Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:17738376

Part#: 11137618512

Ships in 3 Business Days

$ 181.99 USD

Add to Wish List

Qty

$ 181.99 USD

Add to Wish List

This OE quality kit includes the engine oil pan and gasket.

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99

This product was last offered at the strikethrough price on
10-05-2026

$ 80.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 89.99

This product was last offered at the strikethrough price on
10-05-2026

$ 80.99 USD

Limited Qty Sale

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

URO Engine Oil Pan Assembly - F15 X5, F16 X6 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:24145942

Part#: 11137635651

Ships in 1 Business Day

$ 617.99 USD

Add to Wish List

Qty

$ 617.99 USD

Add to Wish List

The URO engine oil pan is a high-quality replacement part designed to ensure the proper functioning of your BMW’s engine oil system. Manufactured to OEM specifications, this oil pan assembly guarantees a secure, leak-free fit for a smooth installation. Crafted from high-strength alloy aluminum or stamped steel, it ensures a durable and warp-free seal between the oil pan and engine block, maintaining the integrity of your engine's oil system.

Show More Show Less

Mishimoto Nylon Braided Oil Cooler Hose Kit

T#:2839826

Part#: MMSBH-F80-15

In Stock at Vendor

$ 456.99 USD

Add to Wish List

Qty

$ 456.99 USD

Add to Wish List

The F8X M3/4 are equipped with a set of hardlines connecting the oil pump tot he oil cooler, these corrode overtime and start to fail causing oil leaks leading and improper oiling of your engine. This Mishimoto kit includes both lines and all needed brackets and hardware for a OE like installation, Features Direct replacement for OE hard lines -10AN fittings and adapters for use with OE oil cooler Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Heat Exchanger 91150

T#:2302729

Part#: 11427509212

Ships in 6 Business Days

$ 236.99 USD

Add to Wish List

Qty

$ 236.99 USD

Add to Wish List

BMW 335I/335XI/135I Baffled Oil Catch Can

T#:599444

Part#: MMBCC-N55-11CBE

In Stock at Vendor

9% off MSRP $ 300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 272.99 USD

Add to Wish List

Qty

9% off MSRP

$ 300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 272.99 USD

Add to Wish List

BMW 335I/335XI/135I Direct Fit Catch Can, 2011-2013 Direct fit for 2011-2013 BMW 335I/335XI/135I Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter Application-specific bracket mounts the can in a serviceable location Billet 6061 aluminum sealed can Defends intercooler, intake system, and VANOS system from oil blow-by Helps maintain proper octane levels to reduce potential detonation Internal air diverter increases air turbulence to improve oil separation Filters and can are fully serviceable Mishimoto Lifetime Warranty The Mishimoto BMW N55 Baffled Oil Catch Can is designed and engineered to reduce carbon build-up, a common issue with the direct fuel injection N55 engines. The Mishimoto BMW N55 catch can kit uses proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can, with its bronze filter and internal baffle, to better separate the oil from the crankcase vapors. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mahle Oil Filter

T#:581126

Part#: OX1773D

In Stock

$ 25.11 USD

Add to Wish List

Qty

$ 25.11 USD

Add to Wish List

High quality filter

Mishimoto 19 Row Universal Oil Cooler

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Heat Exchanger

2X Entries Into Our F80 M3 Sweepstakes

T#:593079

Part#: 17207500754

Back Ordered

$ 103.99 USD

Add to Wish List

Qty

$ 103.99 USD

Add to Wish List

The heat exchanger keeps your engine oil temperature at a safe level. Without it, oil temperatures could skyrocket causing shearing and potentially internal engine component failure.

URO Engine Oil Pan - BMW E9X M3 S65

2X Entries Into Our F80 M3 Sweepstakes

T#:53079357

Part#: 11137839227

Ships in 1 Business Day

$ 1,340.99

This product was last offered at the strikethrough price on
06-01-2026

$ 1,329.99 USD

Add to Wish List

Qty

$ 1,329.99 USD

Add to Wish List

Replacement oil pan for the S65 engine found in the E90/E92/E93 M3. Pan only, does not include gasket, oil level sensor, or drain plug.

Rein Oil Pan Assembly - E60, E63, E64, E65, E66

2X Entries Into Our F80 M3 Sweepstakes

T#:591574

Part#: 11137574532

Ships in 3 Business Days

$ 136.99 USD

Add to Wish List

Qty

$ 136.99 USD

Add to Wish List

Located at the bottom of your vehicle's engine

Oil Filter Housing Lid

2X Entries Into Our F80 M3 Sweepstakes

T#:591694

Part#: 11421736674

Ships in 1 Business Day

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Does not include sealing o-ring

AAF Oil Pan Baffle - E9x M3

T#:7624656

Part#: 116184

Ships in 3 Business Days

$ 230.00 USD

Add to Wish List

Qty

$ 230.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.

Show More Show Less

Mishimoto Direct-Fit Oil Cooler Kit - E46 M3

T#:363342

Part#: MMOCE4601

In Stock at Vendor

$ 1,032.99 USD

Add to Wish List

Qty

$ 1,032.99 USD

Add to Wish List

The S54 is an incredible feat of engineering. Smooth power delivery, individual throttle bodies, and an 8,000 rpm redline make for an unforgettable driving experience. As with any BMW, maintaining optimal oil temperatures is key to extending the life of your vehicle and ensuring that you're getting an unparalleled driving experience. As many of these vehicles see frequent track time, the team at Mishimoto decided to develop a performance oil cooler kit that would provide improved durability and deliver the power needed for track driving. The result: an extremely efficient core with a proven 30°F (16.7°C) drop in oil temperature. With an increase in core thickness of 110%, this oil cooler kit raises your oil capacity by 0.44 qt. The oil cooler end tanks, cast from a single piece of aluminum and TIG-welded to the core, have been designed for maximum reliability, giving you the confidence you need to push your E46 M3 to the limits.

Show More Show Less

Oil Cooler Pipe - Supply

2X Entries Into Our F80 M3 Sweepstakes

T#:18468293

Part#: 17227560979

In Stock

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

CSF High Performance Oil Cooler with OE and AN-10 Fittings - E30 BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:401256

Part#: 8092

Ships in 7 Business Days

Sale - Save 10% $ 359.00

This product was last offered at the strikethrough price on
10-04-2026

$ 323.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 359.00

This product was last offered at the strikethrough price on
10-04-2026

$ 323.10 USD

Add to Wish List

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the E30 platform to an external oil cooler. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit has 4 cooling cores and fits behind the bumper without any issues.

Fits the following BMWs:
1984-1991 E30 BMW M20 Engine

Show More Show Less

Project Cars

SELECT YOUR BMW

Oiling System

Sub-Categories

R55-R59 Oil Catch Can Kit for N18 MINI Engines

Features:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results