Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The BMW E30 3 Series Front Sway Bar Bushing (22mm) is a vital suspension component for the E30 models produced from 1984 to 1991. These bushings play an important role in the performance of the front sway bar, enhancing stability and handling during dynamic driving situations.
Tailored for 22mm Sway Bars:
Functionality:
Material Options:
Performance Enhancement:
Compatibility:
Installation Process:
In summary, the BMW E30 3 Series Front Sway Bar Bushing (22mm) is an essential component for maintaining the performance and handling of these classic BMWs. Whether you’re replacing old bushings or upgrading to polyurethane for enhanced durability and performance, ensuring these components are in top condition is crucial for enjoying the legendary driving dynamics of the E30.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Rear Sway Bar Bushing - 18.5 mm Street for the BMW X3 (2003-2010) is a premium suspension upgrade designed to replace the factory rubber bushings with high-performance polyurethane. This bushing specifically fits rear sway bars with a 18.5 mm diameter, providing better durability and handling for street-focused driving.
High-Quality Polyurethane: These bushings are constructed from polyurethane, a material that offers superior resistance to wear, heat, and common contaminants like oil and road debris. Polyurethane bushings are known for maintaining their shape and function far longer than OEM rubber bushings, making them an ideal choice for drivers looking for durability and performance.
18.5 mm Fitment: This bushing is specifically designed for sway bars with an 18.5 mm diameter, ensuring a precise and snug fit on the rear sway bar of the BMW X3 (E83). Proper fitment is crucial for effective performance and stability improvements.
Street Performance Optimized: While firmer than rubber bushings, Powerflex’s Street series is designed to offer a balance between comfort and performance. These bushings help reduce body roll and sway during cornering, providing better handling and control without making the ride too harsh for everyday driving.
Improved Handling and Stability: By reducing the flex in the sway bar, these bushings limit unnecessary movement in the suspension, improving the vehicle’s overall stability. This results in more predictable handling during turns and reduced body roll, which enhances driver confidence in both normal and spirited driving conditions.
Direct Replacement for Easy Installation: The Powerflex Rear Sway Bar Bushing is designed as a direct replacement for the factory-installed rubber bushings. No additional modifications are necessary, and the kit fits directly into the existing suspension setup for straightforward installation.
Longer Lifespan: Polyurethane bushings are resistant to common issues that plague rubber bushings, such as cracking, deterioration, and deformation due to heat or pressure. This ensures that the suspension performs consistently over time and reduces the need for frequent maintenance or replacement.
Upgrading to the Powerflex Rear Sway Bar Bushing - 18.5 mm Street for the BMW X3 is an excellent choice for those looking to enhance their vehicle’s handling characteristics without sacrificing comfort. Ideal for everyday use, this bushing is a perfect balance of performance and longevity, delivering a better driving experience on the street.
The Powerflex Rear Sway Bar Bushings for the BMW E30, E28, and E24 with a 13mm sway bar are engineered to enhance rear-end stability and handling by replacing the stock rubber bushings with durable polyurethane. This upgrade helps to maximize the sway bar's efficiency, delivering a more responsive and controlled ride.
This upgrade is ideal for BMW owners seeking to improve handling precision and sway bar longevity, whether for spirited street driving or light track use.
The Powerflex Rear Subframe Rear Mount Insert for the BMW E39 5 Series is specifically designed to enhance the performance and stability of the rear suspension system. By utilizing high-quality polyurethane, this insert significantly improves the rigidity of the rear subframe, offering a range of benefits for driving enthusiasts.
Enhanced Handling Performance: The insert reduces flex in the rear subframe mount, resulting in improved stability during cornering. This enhancement leads to better handling characteristics, allowing for more precise control and confidence when navigating turns.
Durability and Longevity: Constructed from resilient polyurethane, these inserts are designed to withstand harsh driving conditions and resist wear from oil, heat, and environmental factors. This durability ensures they maintain performance over a longer period compared to traditional rubber mounts.
Improved Road Feel: By minimizing unwanted movement in the subframe, these inserts provide enhanced feedback to the driver, allowing for a more connected and engaging driving experience. This is particularly beneficial for spirited driving and performance applications.
Straightforward Installation: Designed for a direct fit into the existing rear subframe mounts of the E39 5 Series, these inserts allow for easy installation without the need for modifications or extensive labor.
Ideal for BMW enthusiasts looking to upgrade their E39 5 Series's suspension system, these inserts deliver improved handling and responsiveness, making them suitable for both everyday driving and high-performance scenarios.
The Powerflex Rear Subframe Rear Bushing Insert for the BMW E36 3 Series (1990-1998) is an innovative performance enhancement designed to improve the stability and handling of the rear suspension. This insert works in conjunction with the existing rubber bushings, providing significant upgrades in responsiveness and durability.
Improved Rear Suspension Control: The insert is crafted from high-performance polyurethane, which reduces the amount of flex and movement in the rear subframe. This increased stiffness enhances stability during cornering, resulting in better traction and handling, especially under dynamic driving conditions.
Durability and Longevity: Unlike factory rubber bushings, which can wear out and degrade over time due to exposure to heat and road conditions, Powerflex inserts are built to withstand harsh environments. Their robust construction ensures that they maintain performance levels longer, providing reliable support to the subframe.
Enhanced Handling Characteristics: By minimizing unwanted movement, these inserts help to optimize the alignment of the rear suspension components. This leads to improved handling response and cornering capabilities, giving drivers more confidence and control during spirited driving.
Simple Installation Process: Specifically designed for the E36 3 Series, these inserts fit directly into the original subframe bushings without any need for modification. The installation is straightforward, making it an accessible upgrade for DIY enthusiasts and professionals alike.
Versatile Application: Whether for daily driving, track use, or spirited weekend rides, these inserts are suitable for various driving styles. They enhance the overall performance of the rear suspension, making them a great addition for both casual drivers and performance enthusiasts.
This upgrade is ideal for BMW E36 3 Series owners seeking to elevate their vehicle's rear suspension performance and responsiveness. The Powerflex Rear Subframe Rear Bushing Insert offers a reliable solution for improving handling, stability, and overall driving enjoyment, making it an excellent choice for enhancing the driving experience.
The Powerflex Sway Bar Link Rod Bushing is a high-performance component designed for BMW models including the E36, E30, Z3, and Z1. These bushings are engineered to enhance the suspension system's performance by providing a more rigid connection between the sway bar and link rod.
High-Performance Polyurethane Construction:
Reduced Flex and Improved Response:
Enhanced Stability:
Precision Fit for Multiple Models:
Easy Installation:
Versatile Performance Enhancement:
In summary, the Powerflex Sway Bar Link Rod Bushing is an essential upgrade for owners of BMW E36, E30, Z3, and Z1 models looking to improve their vehicle's suspension performance. With enhanced durability, responsiveness, and handling characteristics, these bushings are key to unlocking the full potential of your BMW’s driving dynamics.
The Powerflex [PFF5-303H] Front Lower Control Arm Rear Bushing Eccentric (Heritage) is designed for BMW E36, E30, Z3, and Z1 models.
Ideal for keeping the classic look of your BMW while improving handling and longevity.
The Powerflex Rear Trailing Arm Bushing for BMW E30, Z3, E21, E36/5 (318ti), and 2002 models is a high-performance suspension upgrade designed to replace the stock rubber bushings. Made from durable polyurethane, this bushing enhances the connection between the trailing arm and chassis, resulting in better handling and improved suspension control.
The Powerflex Rear Trailing Arm Bushing is perfect for BMW enthusiasts who want to improve the performance, handling, and longevity of their car’s suspension. Ideal for both daily driving and performance-focused builds.
The Powerflex Rear Sway Bar Bushing for the BMW E30 and 318Ti, specifically designed for a 16mm sway bar, is a vital upgrade for enhancing the vehicle's suspension performance. By replacing the factory rubber bushings with high-quality polyurethane, this product delivers significant improvements in handling, stability, and overall driving experience.
Enhanced Cornering Performance: The firmer polyurethane material reduces unwanted flex in the sway bar, leading to improved body control during cornering. This results in reduced body roll and better traction, allowing for more confident cornering at higher speeds.
Superior Durability: Unlike traditional rubber bushings that can wear out over time, Powerflex bushings are designed to withstand harsh driving conditions. They resist deterioration from heat, oil, and road debris, providing longer-lasting performance and reliability.
Improved Steering Feedback: The stiffer construction enhances the connection between the sway bar and the chassis, leading to better steering response. Drivers will enjoy a more direct feel and improved handling characteristics, making the vehicle more responsive during dynamic driving.
Easy Installation Process: These bushings are specifically designed to fit the E30 and 318Ti models with a 16mm sway bar, ensuring a direct replacement for the factory components. Installation is straightforward and requires no modifications, making it accessible for DIY enthusiasts and professionals alike.
Versatile Use: Suitable for various driving conditions, these bushings excel in both everyday driving and performance situations. They help optimize the rear suspension geometry, enhancing overall handling and improving tire contact with the road.
This upgrade is ideal for BMW E30 and 318Ti owners who want to boost their vehicle's handling and stability. The Powerflex Rear Sway Bar Bushing for the 16mm sway bar offers a reliable solution for enhancing rear suspension performance, making it a great choice for drivers seeking an improved driving experience.