BMW Sway Bar Kits

Dinan has a unique approach to fine-tuning the handling of the E60 M5, E63 M6 - to improve handling and not impact ride comfort they have engineered a way of stiffening the stock front sway bar while replacing the rear bar with a slightly larger bar. Instead of the traditional larger sway bar Dinan has come up with this way of stiffening the stock front bar. They have relocated the attachment point for the link to be further away from the end - effectively shortening the bar and making it stiffer. This has a number of advantages over a thicker aftermarket bar: lower cost, the bar does not have to be removed, no tradeoff in ride comfort. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned to reduce bodyroll, improve steering and turn-in response, and reduce understeer. This is the same setup as used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 2 point towards your Dinan badge.

The installation on the front bar requires drilling a hole on each end of the bar. The drilling and installation of the relocating bracket can be done with the sway bar still on the car. Detailed installation instructions are included.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Elevate MINI Cooper Countryman & Paceman with NM Engineering 22mm Rear Sway Bar

Experience go-kart-like performance in your MINI Cooper Countryman and Paceman with the NM Engineering 22mm Rear Sway Bar. Unlike competitors, NM Engineering's sway bar is meticulously crafted from a single solid piece of mandrel-bent material with forged ends. This design ensures exceptional rigidity and optimal torsion transfer throughout the straight section of the bar. The kit also includes Aluminum Billet 7075-T6 mounting brackets equipped with grease fittings for effortless maintenance.

Key Features:

• Enhanced rear roll stiffness with the 22mm rear sway bar
• One-piece, mandrel-bent construction with forged ends for superior rigidity
• Three-position adjustability for improved handling characteristics
• Powder Coated NM Blue finish for added durability

Elevate your driving experience with the NM Engineering 22mm Rear Sway Bar.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with Hotchkis Performance Sway Bars.

Performance sway bars allow you to take corners aggressively while still keeping the wheels firmly planted and reducing body roll, all without reducing overall ride quality. Hotchkis sway bars feature powder coated tubular steel construction for maximum durability and stiffness. Every kit includes the essential components needed for an easy installation and to ensure you get the most from your sway bars.

Features:

• Eliminate Unwanted Body Roll
• Dramatically Improves Handling And Stability
• Easy Installation
• Durable Powder Coat Finish
• All Necessary Hardware and bushings included
• Specifically Tuned
• Premium Kit

Specs: Front 30.2mm (1-3/16 in.) Hollow 3 Way Adjustable Stiffness over stock 04 330ci Sport +31% +51% +77% Bar Rates lbs/in. (Not Wheel Rate) Front:470 lbs/in. 540 lbs/in. 630 lbs/in.

Fits the following BMWs:
1999-2006 E46 BMW Non-M RWD

Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with Hotchkis Performance Sway Bars.

Performance sway bars allow you to take corners aggressively while still keeping the wheels firmly planted and reducing body roll, all without reducing overall ride quality. Hotchkis sway bars feature powder coated tubular steel construction for maximum durability and stiffness. Every kit includes the essential components needed for an easy installation and to ensure you get the most from your sway bars.

Features:

• Improves Cornering
• Reduces Body Roll
• CNC Bent For A Precise Fit
• Lightweight Hollow Construction
• Grease-able Polyurethane Bushings
• Powder Coated For Durability
• Tested And Tuned For Best Performance

Specs: Front 30.2mm (1 3/16 in.) Hollow 3 Way Adjustable Stiffness over stock 04 330ci Sport +31% +51% +77%. Rear 25.4mm (1 in.) Hollow 2 way Adjustable. Stiffness over stock 04 330ci Sport +138% +171% Bar Rates lbs/in. (Not Wheel Rate) Front: 470 lbs/in. 540 lbs/in. 630 lbs/in. Rear: 475 lbs/in. 540 lbs/in.

Fits the following BMWs:
1999-2006 E46 BMW Non-M RWD

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan E9X Sway Bar Specs:
F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
R: 15.8mm, solid, non-adjustable, urethane bushings included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

Note: main image may not match actual sway bars.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2011 E91 BMW 325i 328i - Touring Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1982 - 1991 E30 318i 318is 325 325e 325es 325i 325is 325iC 325ix

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Upgrade your vehicle's handling and stability with H&R Sport Sway Bars, crafted from top-grade (hf) 50CrV4 steel alloy, offering unparalleled tensile strength. These sway bars ensure smooth transitional function, decreasing response time and enhancing stiffness compared to stock bars. Experience minimized body roll, improved lateral stability, and enhanced cornering grip with H&R Sport Sway Bars. Each sway bar undergoes meticulous cold-forming, heat treatment, and shot-peening processes, guaranteeing durability, resilience, and precise dimensions. Manufactured in H&R's ISO9001 certified facility in Germany, these sway bars undergo rigorous quality control checks to ensure superior performance.

Benefits:

• Crafted from high-tensile (hf) 50CrV4 steel alloy
• Improves lateral stability and cornering grip
• Reduces body roll for enhanced handling
• Precision engineering for resilience and durability
• Rigorous quality control and testing for superior performance

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

• CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
• 2 Position Adjustable, CNC Machined, TIG Welded Bar Ends
• Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
• 2 Stage Tangerine Orange, Powder-coated Finish
• Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2007-2013 E90/2 BMW 335i

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2009-2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F chassis M5/M6 to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Dinan M5/M6 Sway Bar Specs:
F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
R: 22mm, hollow, 3-position adjustable, urethane bushings, and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. These bars are worth 2 points towards your Dinan badge.

This item fits the following BMWs:
2012+ F10 BMW M5
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6