Upgrade Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It also offers a matching set for your engine bay.

This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Besides outstanding performance, it looks super cool and adds the under hood WOW factor that MINIs need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This design prevents disruption to the PCV electrical connection, eliminating the risk of a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part fits only MINIs with the N18 R60 R61 turbocharged engine and a single large PCV vent hose connecting the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL issues.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

MINI R56 Noise Generator Delete Pipe - Blue is designed to optimize the performance of your MINI Cooper 1.6 Turbo by replacing the restrictive standard hose with a high-flow intake charge hose from Forge Motorsport. This upgrade fits directly to the throttle body at the rear of the engine bay, improving turbo response throughout the rev range by eliminating the noise generator found in earlier models. Constructed from reinforced silicone, this hose is built to withstand higher temperatures and pressures, making it ideal for tuned engines. Available in a striking blue color, it comes complete with stainless steel hose clamps for easy installation.

• Enhanced Performance: Improves turbo response by eliminating the restrictive noise generator.
• Durable Construction: Reinforced silicone structure withstands greater temperatures and pressures.
• Optimized for Tuned Engines: Ideal for MINI Cooper 1.6 Turbo with enhanced performance needs.
• Direct Fit: Replaces BMW OEM Part No. 13719806688.
• Stylish Appearance: Available in a striking blue color.
• Complete Kit: Supplied with stainless steel hose clamps for easy installation.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

Complete Your MINI's Intake System with Our Premium Silicone Kit

This kit includes the intake boot, hot side boot, and cold side elbow to complete your intake system in silicone. It also provides a matching set for your engine bay.

This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor that MINIs need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers unmatched durability, better airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This design prevents disruption to the PCV electrical connection, eliminating the risk of a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part fits only MINIs equipped with the N18 turbocharged engine with one large PCV vent hose connecting the intake hose to the cam cover. It also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL issues.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

If you're seeking to eradicate vacuum leaks and enhance the overall airflow of your intake system, look no further than this comprehensive kit.

The M52TU/M54 air intake boots have gained notoriety for their tendency to crack, resulting in vacuum leaks, triggering check engine lights, and causing various performance issues. The soft rubber boots are constantly exposed to high temperatures from the engine, leading them to become brittle and prone to cracking over time. These cracks permit unmeasured air intake beyond the airflow meter, resulting in rough idling, sputtering, or even engine stalls.

This kit offers a solution by providing both lower and upper air intake boots/hoses for a complete repair. Additionally, as a bonus, the kit includes an ECS Exact-Fit High-Flow Air Filter to optimize your vehicle's intake tract.