BMW Heating & Air Conditioning

Turner E9x Cowl Delete Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1809115

Part#: 007629LA09KT

In Stock

Sale - Save 25% $ 420.95

This product was last offered at the strikethrough price on
06-14-2026

$ 315.71 USD

Add to Wish List

Qty

Sale - Save 25%

$ 420.95

This product was last offered at the strikethrough price on
06-14-2026

$ 315.71 USD

Add to Wish List

Get rid of all your plastic in your engine bay for a cleaner look! Completely eliminates the bulky, obtrusive cabin filter housing for more room underhood - offering more room to access the engine. Compliment your engine bay and hide away the exposed ECU.

Show More Show Less

Turner Motorsport Cowl Delete/Cabin Filter Set - E90 E91 E92 E93 E82 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7052661

Part#: 007629LA01-02

In Stock

Sale - Save 25% $ 87.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 87.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.99 USD

Add to Wish List

Knock down the roadblocks preventing you from performing regular maintenance on your BMW. On the E9x and E8x chassis you run into issues with changing the rear spark plugs and coil packs. A job that should take approximately an hour or so ends up taking significantly longer because you have to remove the cowl and all associated screws. Most of the time the screws end up missing or dropped into your engine bay which can be a headache and you have to order new hardware or deal with the cowl being incorrectly fastened.

Cowl delete filters are a great addition to your E9x or E8x chassis; these filters allow you to get rid of clutter in the engine bay which adds benefits like weight reduction, improved air flow in the engine bay, more room for working on the engine and an overall cleaner engine bay appearance. We all know it is important to keep up on engine maintenance to keep your BMW running at peak performance and prevent larger future issues. When we can eliminate any roadblocks or additional work preventing us for performing engine maintenance this could make it less daunting to go change spark plugs, coil packs or simple filters.

Benefits:

Weight Reduction
Cleaner engine bay appearance
Added room for maintenance
Improved engine bay air flow

Show More Show Less

Turner Cowl Delete Harness Mounting Bracket - E9x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1809114

Part#: 007629LA02

In Stock

Sale - Save 25% $ 143.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 143.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.99 USD

Add to Wish List

Turner E9x Cowl Delete Harness Mounting Bracket mounts to factory bolt holes; it is an easy no-drill install that creates a solid location to tie back your engine harness. However, removing the cowl introduces the possibility of dirt and debris entering your cabin. To solve this issue we suggest pairing it with Burger's Cabin/Cowl Delete Filters. These are small, dry, and maintenance-free filters that both add a finished look to your engine bay and prevent debris from entering the cabin.

Show More Show Less

Bav Auto Blower Motor - E88 E9X Z4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:579895

Part#: 55362

Ships on Aug 10, 2026

Sale - Save 20% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 83.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 83.99 USD

Add to Wish List

The blower motor is located behind the glove box and is responsible for circulating air. If yours has failed, there may be little to no air flow. Reuses your regulator. Blower motor resistor part number 64119265892 sold separately.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Burger Motorsports Cabin/Cowl Delete Filters - Blue

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11857173

Part#: BMS-COWL-FILTEB

In Stock

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

Removing the cowl saves weight, simplifies maintenance, and lowers underhood temps. Keep things clean and free of debris with these BMW cowl filters. Dry filters will require little to no maintenance and are a great compromise when removing the cowl. Fits the following BMWs: E82 E88 1 Series E90 E91 E92 E93 3 Series

Show More Show Less

Bav Auto Blower Motor - BMW E30 3-Series, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640505

Part#: 64111370930

In Stock

Sale - Save 20% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.19 USD

Add to Wish List

Replace your defective E30 heater/air conditioning blower motor with this Bav Auto replacement. If you are experiencing reduced or no blower fan output it may be time to replace this blower motor. This integrated unit includes both the motor and the fan blades. It is mounted under the windshield cowl at the base of the windshield. Bav Auto replacement blower motor for BMW part # 64111370930 From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

CSF A/C Condenser - E82/88 E84 E9X Z4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:638736

Part#: 10687

Ships on Jul 24, 2026

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

A common issue with A/C systems, damage to fins can cause poor function of the condenser, leading to poor A/C performance. This CSF replacement may be all you need have your A/C blowing cold air like new. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Replacement for BMW Part Number: 64539229021

Show More Show Less

A/C Solutions BMW E30 R134a Retrofit Kit (82319067394)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466776

Part#: ACS-30-RETROFIT-

Ships in 3 Business Days

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross-compatible to the OEM BMW retrofit kit provided in the late 1990s. What's the difference between this and the full kit? Unlike our full A/C Solutions BMW E30 Conversion Kit, this product only provides the bare minimum components needed to refresh your factory system. This is a great solution for the 318i/is (M42) which uses the Denso compressor; however, for M20-based E30s that use the Bosch compressor, we highly recommend using our full conversion kit that contains a Sanden compressor, parallel flow condenser, and R134a specific expansion valve. What’s in the box? OE R134a filter drier Safety high/low-pressure cut off switch R134a low and high-pressure service fittings E30 R134a o-ring kit R134a retrofit label

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 06/1987 with the M30B34 Engine & Without Rear A/C

T#:32350872

Part#: 24-635-S-B34

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E30 LHD Interior Lines

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29300814

Part#: ACS-30-INT-SET

Ships in 3 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line

Show More Show Less

BMW E30 R134a Expansion Valve

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29666091

Part#: ACS-30-XV

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement component during any R134a retrofit. What’s included? R134a expansion valve Fitment notes: For use with the following models: BMW E30 (all)

Show More Show Less

A/C Solutions BMW E30 Bracket And Hardware Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466771

Part#: ACS-30-ABCD-KIT

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay. What’s in the box? A/C Solutions hose bracket holder (low-pressure line) (#1) Body spacer (high-pressure line) (#2) Hose clamp (large) (#3) Hose clamp (mid) (2x) (#4) Hose clamp (small) (2x) (#5) ST 10mm trim screw (long) (#6) ST 10mm trim screw (mid) (2x)(#7) ST 10mm trim screw (short) (3x) (#8) Expanding body nut (5x) (#9) M6 lock nut (#10) M6 lock washer (#11) M6 washer (#12) 10mm body speed clip (#13) Fitment notes: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram. For use with the following models: BMW E30 Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496

Show More Show Less

A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466786

Part#: ACS-203038-KIT

Ships in 3 Business Days

$ 225.99 USD

Add to Wish List

Qty

$ 225.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/89+

T#:29666101

Part#: 30-325-LATE-AC

Ships in 3 Business Days

Starting at $ 1,709.99 USD

Add to Wish List

Starting at $ 1,709.99 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which model/year should I choose? Use the mfg. date on the driver's door of your E30 as well as our supplemental user guide to select the appropriate combination for your car. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc.

Show More Show Less

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:552591

Part#: BMS-COWL-FILTE90

In Stock

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

Removing the cowl saves weight, simplifies maintenance, and lowers underhood temps. Keep things clean and free of debris with these BMW cowl filters. Dry filters will require little to no maintenance and are a great compromise when removing the cowl.

Fits the following BMWs:
E82 E88 1 Series
E90 E91 E92 E93 3 Series

Show More Show Less

CSF A/C Condenser - F07/10 535, F06/12/13 640, F01/02 740

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:598781

Part#: 10807

In Stock

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

A common issue with A/C systems, damage to fins can cause poor function of the condenser, leading to poor A/C performance. This CSF replacement may be all you need have your A/C blowing cold air like new. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Replacement for BMW Part Number: 64509391489

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (standard)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466797

Part#: SD5H14-6668

Ships in 3 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.

Show More Show Less

A/C Solutions R134a Retrofit Kit (82319067396) - E31, E32, E34 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42638598

Part#: ACS-34-RETROFIT

Ships in 3 Business Days

$ 122.00 USD

Add to Wish List

Qty

$ 122.00 USD

Add to Wish List

This retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retrofit kit provided in the late 1990s.

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 06/1987+ with the M30B35 Engine & Without Rear A/C

T#:32350873

Part#: 24-635-S-B35

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

AFe POWER Carbon Cabin Air Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:48401509

Part#: 35-10025C-MB

In Stock

20% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.00 USD

Add to Wish List

Qty

20% off MSRP

$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.00 USD

Add to Wish List

Keep your cabin air fresh and your HVAC system running efficiently by replacing your vehicle’s interior air filter. Often overlooked, this essential maintenance item should be swapped out whenever it becomes dirty or clogged. Designed to block dust, dirt, and allergens from entering your cabin, this carbon filter protects your interior while preventing contaminants from clogging your HVAC system, allowing it to operate cleaner and more effectively. Install a new filter today to ensure clean, freely flowing air throughout your vehicle.

Show More Show Less

MINI R55 to R61 A/C Condenser & Drier

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31158735

Part#: 10540

In Stock

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

MINI R55 to R61 A/C Condenser & Drier is an essential component for maintaining optimal climate control in your MINI. This aluminum air conditioning condenser integrates a built-in dryer and mounts below the locking bridge on the core support. Ideal for replacing damaged or cracked units, it ensures that the air conditioning system functions effectively and efficiently.

Integrated Dryer: Combines the condenser and dryer into one unit for convenience.
Aluminum Construction: Lightweight yet durable for long-lasting performance.
Optimal Mounting Location: Fits below the locking bridge on the core support for precise installation.
Improved A/C Functionality: Essential for maintaining the air conditioning system's efficiency.
Easy Replacement: Ideal for replacing damaged or cracked condensers.

Show More Show Less

Blower Motor - Non-Removable Cages - E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:579852

Part#: 53766

In Stock

Sale - Save 10% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.49 USD

Add to Wish List

Same as 64111468453 and 64118390208 This part does not have removable fan wheels. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

BMW R134a High-Pressure Cut Off Switch (Green)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29666089

Part#: ACS-R134ASWITCHG

Ships in 3 Business Days

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307

Show More Show Less

CSF E30 Parallel Flow Condenser + 13" SPAL Fan Combo

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29500098

Part#: ACS-30-CSF-SPAL-

Ships in 3 Business Days

$ 378.99 USD

Add to Wish List

Qty

$ 378.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser and SPAL fan upgrade will replace your factory condenser and auxiliary fan resulting in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. Note: In order to properly run any SPAL fan, additional wiring will be required What’s included? CSF parallel flow condenser (cross ref # 64538391509) Genuine SPAL 13" straight blade pusher fan 30A fuse Mounting hardware Detailed installation instructions Fitment notes: Additional wiring will be required For use with the following models: BMW E30 (all)

Show More Show Less

A/C Condenser

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:598766

Part#: 10805

In Stock

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

A common issue with A/C systems, damage to fins can cause poor function of the condenser, leading to poor A/C performance. This CSF replacement may be all you need have your A/C blowing cold air like new. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Replacement for BMW Part Number: 64506804721 & 64506804722

Show More Show Less

BMW E30 R134a Filter Drier (Late Model)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29500124

Part#: ACS-30-L-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the late model high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For early model applications, see ACS-30-E-FD For use with the following models (≥ 09/89): BMW E30 (all)

Show More Show Less

K&N Lifetime Cabin Air Filter for MINI Cooper

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404898

Part#: VF5000

Ships in 5 Business Days

$ 47.99

This product was last offered at the strikethrough price on
01-20-2026

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Upgrade your Mini's cabin air filtration system with K&N Cabin Air Filters for a cleaner and fresher driving experience. Check out the benefits below:

Easy to clean and reuse, saving you money in the long run
Freshens and cleans incoming cabin air for a more pleasant driving environment
Helps control odors to keep your cabin smelling fresh
Captures most mold, mildew, fungus, spores, bacteria, germs, pollen, and allergens for improved air quality
Factory fit design ensures easy installation
Electrostatically charged to effectively trap dirt and dust particles
Backed by a 10 year/100,000 mile limited warranty for peace of mind

Ensure your Mini's cabin air is clean and odor-free with K&N Cabin Air Filters.

Show More Show Less

A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32284525

Part#: ACS3024VABMFKIT1

Ships in 3 Business Days

$ 663.00 USD

Add to Wish List

Qty

$ 663.00 USD

Add to Wish List

Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E30 using the E36 M3 Denso compressor. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. This setup is designed to work with the S50, S52, S54, M50, M52, and M54 engines, offering seamless integration and reliable performance. Which model (chassis) should I choose? Select the model (chassis) assigned to your E30 when it left the factory to ensure the proper line routing. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Denso manifold o-ring Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso compressor (Denso 471-1114 or 471-1115). BMW compressor bracket (64551730768) will be required to support the Denso compressor. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all)

Show More Show Less

CSF A/C Condenser - F01 F02 F10

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:638735

Part#: 10688

Ships in 2 Business Days

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A common issue with A/C systems, damage to fins can cause poor function of the condenser, leading to poor A/C performance. This CSF replacement may be all you need have your A/C blowing cold air like new. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Replacement for BMW Part Number: 64536805452 & 64539219843

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466768

Part#: ACS-30-AB-SET

Ships in 3 Business Days

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - M6 (S38B35) W/ Rear A...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles With Rear A/C Only

T#:32350876

Part#: 24-M6-R

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) W/ Re...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 06/1987+ with the M30B35 Engine & With Rear A/C

T#:32350875

Part#: 24-635-R-B35

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

CSF A/C Condenser - F25 X3 xDrive28i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:598788

Part#: 10833

Ships in 3 Business Days

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

A common issue with A/C systems, damage to fins can cause poor function of the condenser, leading to poor A/C performance. This CSF replacement may be all you need have your A/C blowing cold air like new. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Replacement for BMW Part Number: 64539216144

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) W/ Re...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 06/1987 with the M30B34 Engine & With Rear A/C

T#:32350874

Part#: 24-635-R-B34

Ships in 8 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Mid Model

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87 Up To 08/89 Only

T#:32317675

Part#: E30325MID

Ships in 3 Business Days

Starting at $ 1,756.00 USD

Add to Wish List

Starting at $ 1,756.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

Condor Speed Shop Aluminum HVAC Delete Panel - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578346

Part#: ALHDP30

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

E30 HVAC delete panel. Great location for switches, gauges, warning lights, or anything else you want to relocate in your track car. Designed to fit perfectly in the OEM HVAC location. Bend the four mounting tabs 90 degrees and mount using the OEM screws. Sandblasted and ready for finishing. Perfect fitment .088 thick Aluminum Mounting tabs in OEM locations Sandblasted Ready for paint

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87+ Only

T#:32350866

Part#: E3024VLATE

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Mode...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29300810

Part#: ACS-30-C-LATE-SE

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64538391041, 64531381741, 61627198552

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87+ Only

T#:32350825

Part#: E30M3LATE

Ships in 3 Business Days

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 09/87 Only

T#:32317688

Part#: E30M3EARLY

Ships in 3 Business Days

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

Cabin Filter / Fresh Air Filter - Washable

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31589322

Part#: VF2060

In Stock

$ 83.99

This product was last offered at the strikethrough price on
01-20-2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

A/C Condenser & Drier

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31556129

Part#: 10659

In Stock

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

E9X Cabin Filter Covers

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471635

Part#: E9X-C-F-C

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.

Show More Show Less

E9X Cabin Filter Covers - Red

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26638202

Part#: E9X-C-F-CRED

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.

Show More Show Less

Heater Valve Repair Kit - E53, E70, E71

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:580956

Part#: HVRK1

In Stock

Sale - Save 6% $ 90.99

This product was last offered at the strikethrough price on
05-03-2026

$ 85.61 USD

Add to Wish List

Qty

Sale - Save 6%

$ 90.99

This product was last offered at the strikethrough price on
05-03-2026

$ 85.61 USD

Add to Wish List

This heater valve repair kit is perfect for the DIYer! This kit contains seals and plungers that replace the failed components in your broken heater valve.

Project Cars

SELECT YOUR BMW

BMW Heating & Air Conditioning

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results