BMW Heating & Air Conditioning

Turner Motorsport Cowl Delete/Cabin Filter Set - E90 E91 E92 E93 E82 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7052661

Part#: 007629LA01-02

In Stock

Sale - Save 25% $ 87.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 87.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.99 USD

Add to Wish List

Knock down the roadblocks preventing you from performing regular maintenance on your BMW. On the E9x and E8x chassis you run into issues with changing the rear spark plugs and coil packs. A job that should take approximately an hour or so ends up taking significantly longer because you have to remove the cowl and all associated screws. Most of the time the screws end up missing or dropped into your engine bay which can be a headache and you have to order new hardware or deal with the cowl being incorrectly fastened.

Cowl delete filters are a great addition to your E9x or E8x chassis; these filters allow you to get rid of clutter in the engine bay which adds benefits like weight reduction, improved air flow in the engine bay, more room for working on the engine and an overall cleaner engine bay appearance. We all know it is important to keep up on engine maintenance to keep your BMW running at peak performance and prevent larger future issues. When we can eliminate any roadblocks or additional work preventing us for performing engine maintenance this could make it less daunting to go change spark plugs, coil packs or simple filters.

Benefits:

Weight Reduction
Cleaner engine bay appearance
Added room for maintenance
Improved engine bay air flow

Show More Show Less

A/C Solutions BMW E30 R134a Retrofit Kit (82319067394)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466776

Part#: ACS-30-RETROFIT-

Ships in 3 Business Days

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross-compatible to the OEM BMW retrofit kit provided in the late 1990s. What's the difference between this and the full kit? Unlike our full A/C Solutions BMW E30 Conversion Kit, this product only provides the bare minimum components needed to refresh your factory system. This is a great solution for the 318i/is (M42) which uses the Denso compressor; however, for M20-based E30s that use the Bosch compressor, we highly recommend using our full conversion kit that contains a Sanden compressor, parallel flow condenser, and R134a specific expansion valve. What’s in the box? OE R134a filter drier Safety high/low-pressure cut off switch R134a low and high-pressure service fittings E30 R134a o-ring kit R134a retrofit label

Show More Show Less

A/C Solutions BMW E30 LHD Interior Lines

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29300814

Part#: ACS-30-INT-SET

Ships in 3 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line

Show More Show Less

A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466786

Part#: ACS-203038-KIT

Ships in 3 Business Days

$ 225.99 USD

Add to Wish List

Qty

$ 225.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING

Show More Show Less

A/C Solutions BMW E30 Bracket And Hardware Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466771

Part#: ACS-30-ABCD-KIT

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay. What’s in the box? A/C Solutions hose bracket holder (low-pressure line) (#1) Body spacer (high-pressure line) (#2) Hose clamp (large) (#3) Hose clamp (mid) (2x) (#4) Hose clamp (small) (2x) (#5) ST 10mm trim screw (long) (#6) ST 10mm trim screw (mid) (2x)(#7) ST 10mm trim screw (short) (3x) (#8) Expanding body nut (5x) (#9) M6 lock nut (#10) M6 lock washer (#11) M6 washer (#12) 10mm body speed clip (#13) Fitment notes: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram. For use with the following models: BMW E30 Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496

Show More Show Less

BMW E30 R134a Expansion Valve

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29666091

Part#: ACS-30-XV

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement component during any R134a retrofit. What’s included? R134a expansion valve Fitment notes: For use with the following models: BMW E30 (all)

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 06/1987 with the M30B34 Engine & Without Rear A/C

T#:32350872

Part#: 24-635-S-B34

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466793

Part#: SD5H14-6630

Ships in 3 Business Days

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)

Show More Show Less

BMW E30 R134a Filter Drier (Early Model)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29500118

Part#: ACS-30-E-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the early high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For late-model applications, see ACS-30-L-FD For use with the following models (< 09/89): BMW E30 (all)

Show More Show Less

BMW R134a Safety Pressure Switch (Black)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32118918

Part#: ACS-R134ASWITCHB

Ships in 3 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a safety high/low-pressure cut off switch Fitment notes: This switch is compatible with the late model E30 filter drier. For use with the following models: BMW E30 (all) Cross reference part numbers: 64538390971, 64531386813, SW11509C, 1711418, 36571

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (standard)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466797

Part#: SD5H14-6668

Ships in 3 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.

Show More Show Less

A/C Solutions R134a Retrofit Kit (82319067396) - E31, E32, E34 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42638598

Part#: ACS-34-RETROFIT

Ships in 3 Business Days

$ 122.00 USD

Add to Wish List

Qty

$ 122.00 USD

Add to Wish List

This retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retrofit kit provided in the late 1990s.

AFe POWER Carbon Cabin Air Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:48401509

Part#: 35-10025C-MB

In Stock

20% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.00 USD

Add to Wish List

Qty

20% off MSRP

$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.00 USD

Add to Wish List

Keep your cabin air fresh and your HVAC system running efficiently by replacing your vehicle’s interior air filter. Often overlooked, this essential maintenance item should be swapped out whenever it becomes dirty or clogged. Designed to block dust, dirt, and allergens from entering your cabin, this carbon filter protects your interior while preventing contaminants from clogging your HVAC system, allowing it to operate cleaner and more effectively. Install a new filter today to ensure clean, freely flowing air throughout your vehicle.

Show More Show Less

BMW R134a High-Pressure Cut Off Switch (Green)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29666089

Part#: ACS-R134ASWITCHG

Ships in 3 Business Days

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466768

Part#: ACS-30-AB-SET

Ships in 3 Business Days

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

BMW E30 R134a Filter Drier (Late Model)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29500124

Part#: ACS-30-L-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the late model high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For early model applications, see ACS-30-E-FD For use with the following models (≥ 09/89): BMW E30 (all)

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - M6 (S38B35) W/ Rear A...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles With Rear A/C Only

T#:32350876

Part#: 24-M6-R

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

K&N Lifetime Cabin Air Filter for MINI Cooper

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404898

Part#: VF5000

Ships in 5 Business Days

$ 47.99

This product was last offered at the strikethrough price on
01-20-2026

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Upgrade your Mini's cabin air filtration system with K&N Cabin Air Filters for a cleaner and fresher driving experience. Check out the benefits below:

Easy to clean and reuse, saving you money in the long run
Freshens and cleans incoming cabin air for a more pleasant driving environment
Helps control odors to keep your cabin smelling fresh
Captures most mold, mildew, fungus, spores, bacteria, germs, pollen, and allergens for improved air quality
Factory fit design ensures easy installation
Electrostatically charged to effectively trap dirt and dust particles
Backed by a 10 year/100,000 mile limited warranty for peace of mind

Ensure your Mini's cabin air is clean and odor-free with K&N Cabin Air Filters.

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) W/ Re...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 06/1987 with the M30B34 Engine & With Rear A/C

T#:32350874

Part#: 24-635-R-B34

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 06/1987+ with the M30B35 Engine & Without Rear A/C

T#:32350873

Part#: 24-635-S-B35

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

Condor Speed Shop Aluminum HVAC Delete Panel - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578346

Part#: ALHDP30

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

E30 HVAC delete panel. Great location for switches, gauges, warning lights, or anything else you want to relocate in your track car. Designed to fit perfectly in the OEM HVAC location. Bend the four mounting tabs 90 degrees and mount using the OEM screws. Sandblasted and ready for finishing. Perfect fitment .088 thick Aluminum Mounting tabs in OEM locations Sandblasted Ready for paint

Show More Show Less

A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Mode...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29300810

Part#: ACS-30-C-LATE-SE

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64538391041, 64531381741, 61627198552

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Mid Model

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87 Up To 08/89 Only

T#:32317675

Part#: E30325MID

Ships in 3 Business Days

Starting at $ 1,756.00 USD

Add to Wish List

Starting at $ 1,756.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87+ Only

T#:32350866

Part#: E3024VLATE

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87+ Only

T#:32350825

Part#: E30M3LATE

Ships in 3 Business Days

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

Cabin Filter / Fresh Air Filter - Washable

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31589322

Part#: VF2060

In Stock

$ 83.99

This product was last offered at the strikethrough price on
01-20-2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

E9X Cabin Filter Covers

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471635

Part#: E9X-C-F-C

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.

Show More Show Less

E9X Cabin Filter Covers - Red

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26638202

Part#: E9X-C-F-CRED

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.

Show More Show Less

A/C Condenser & Drier

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31556129

Part#: 10659

In Stock

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Blower Motor - E39, E53

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with automatic air conditioning

T#:579829

Part#: 53037

In Stock

Sale - Save 29% $ 135.99

This product was last offered at the strikethrough price on
05-03-2026

$ 97.23 USD

Add to Wish List

Qty

Sale - Save 29%

$ 135.99

This product was last offered at the strikethrough price on
05-03-2026

$ 97.23 USD

Add to Wish List

For cars equipped with automatic air conditioning.

A/C Solutions R134a Retrofit Label

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466781

Part#: ACS-RETROFIT-LAB

Ships in 3 Business Days

$ 6.95 USD

Add to Wish List

Qty

$ 6.95 USD

Add to Wish List

Designed to mimic the factory BMW and Porsche design language, this engine bay label is used to document the amount and date of R134a added to the system after completing any A/C repair. This sticker is designed for high temp engine bay applications and should be placed in a visible spot for future service technicians to reference. Made in the USA. What’s included? A/C Solutions R134a retrofit label (3.75" wide) Cross reference part numbers: 64508363254

Show More Show Less

R12 To R134a Low And High-Pressure Service Port Adapter Fittings ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29666088

Part#: ACS-R134A-ADAPTE

Ships in 3 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Designed for use on the E24, E28, and E30, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports to charge the system with R134a. What’s included? R134a low and high-pressure service fittings Fitment notes: Low profile design allows for clearance around BMW E30 hood support. For use with the following models: BMW E23, E24, E28, E30

Show More Show Less

E9X Cabin Filter Covers - Blue

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26638201

Part#: E9X-C-F-CBLU

Ships in 1 Business Day

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Our cabin filter covers are designed to prevent the ingress of water into your cabin and prolong the life of your cabin filters after you've removed your wiper cowl or are using BMS-style cabin filters. These are designed to fit all E9X's and all E8X's (E90, E91, E92, E93, E81, E82, E88, E87) that are using a wiper cowl delete kit or are using TMS-style cabin filters. These filter covers are made in-house by using weatherproof PETG that receives an additional layer of protection from clear coating them with UV proof and weatherproof clear coat paint.

Show More Show Less

A/C Solutions BMW E30 High-Pressure Condenser Return Line - Early Mod...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29300811

Part#: ACS-30-C-EARLY-S

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Designed specifically for the early model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64539067572, 64531377857, 64531372608

Show More Show Less

A/C Solutions BMW E30 E28 E24 R134a O-Ring Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466775

Part#: ACS-O-RING-KIT

Ships in 3 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system to the modern HNBR R134a standard. This is cross compatible with all versions of the E30, E28, E24, and E23, and may include additional o-rings as a result. What’s included? 2x #12 R134a o-rings 4x #10 R134a o-rings 6x #8 R134a o-rings 5x #6 R134a o-rings Fitment notes: For use with the following models: BMW E23, E24, E28, E30, E32 Cross-reference part numbers: 64508390602, 64508390601, 64508390603, 64508390604, 64508390605, 64531350491

Show More Show Less

A/C Solutions BMW S14 M10 Sanden Compressor Bracket

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32118912

Part#: ACS-1014-KIT

Ships in 3 Business Days

$ 325.99 USD

Add to Wish List

Qty

$ 325.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using a fully isolated (bushed) design similar to that of the factory E30 M3 assembly. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and zinc-plated to withstand the toughest conditions without sacrificing the OEM look and feel. Overall package weight (including compressor) comes in at 17lbs (less than the original E30 M3 assembly) and boasts a tighter center of gravity for less stress on the isolator bushings. What’s included? A/C Solutions S14/M10 Sanden compressor bracket Yellow zinc 8.8 and 10.9 hardware Compressor ground wire Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. A larger V-belt will be required (Gates 13x875mm). For use with the following models: BMW E30 (318i, 320is, M3) PATENT PENDING Cross-reference part numbers: 64521268536, 64521277002, 64521706826, 07119932095, 07119904115, 07119901161, 07119905549, 07119932112, 07119932122, 07119904463, 07119900581, 07119902912, 07119913664, 64521268537, 64521268538, 32411705063, 07119900052, 07119907030, 07129946400, 07129905767, 64521278034, 07119912712, 07129964672, 64521278036, 64521276354, 07119901120, 07119903039

Show More Show Less

A/C Solutions Box Sticker

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29466780

Part#: ACS-BOX-STICKER

Ships in 3 Business Days

$ 2.75 USD

Add to Wish List

Qty

$ 2.75 USD

Add to Wish List

The original A/C Solutions box sticker - perfect for your corner window, tool chest, laptop, desk, and more. Made in the USA. What’s included? A/C Solutions box sticker (4" wide)

A/C Solutions BMW E30 Sanden Conversion Line Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32284522

Part#: ACS-30-1014-AB-S

Ships in 3 Business Days

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

Denso Compressor Manifold R134a O-Ring

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32284523

Part#: 471-O-RING

Ships in 3 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

New HNBR manifold gasket designed for the E36 M3 Denso Compressor and/or our 24v Swap Denso Compressor Manifold to ensure your A/C system is properly sealed. This can be used with both R12 and R134a and meets or exceeds factory specifications. What’s included? Denso manifold o-ring Cross-reference part numbers: MT9519, 24156, 19188305, 88918403, 1531721, 471

Show More Show Less

Race German Heater Delete Plug - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6827893

Part#: RGHDPE30

Ships in 2 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's Heater Delete Plug was designed for E30's that have had the heater core removed. Without this plug there is a very unsightly hole in the firewall that allows for foreign objects such as water and debris to enter the cabin. This plug works perfectly as a seal and also keeps the engine bay looking clean!

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 633CSi (09/1982+) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/1982+

T#:32350871

Part#: 24-633-S

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Early M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32118922

Part#: A301014CEARLYSET

Ships in 3 Business Days

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Designed specifically for the early model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (320is, M3) Cross reference part numbers: 64539067578, 64531386565

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 09/87 Only

T#:32350849

Part#: E3024VEARLY

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions E30 24v Swap Denso Compressor Manifold

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32284524

Part#: ACS-24V

Ships in 3 Business Days

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E30. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso Compressor (Denso 471-1114 or 471-1115) and the A/C Solutions E30 24v Swap Lines. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all) PATENT PENDING

Show More Show Less

A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Late Mo...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32118921

Part#: AC301014CLATESET

Ships in 3 Business Days

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Designed specifically for the late model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (320is, M3) Cross-reference part numbers: 64539067578, 64531386565

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Heating & Air Conditioning

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results