BMW Aero & Body

BMW F82 M4 ADRO Carbon Trunk Spoiler is a premium upgrade designed to enhance the aesthetics and performance of the BMW M4. Unlike the factory rear trunk spoiler, this ADRO carbon fiber spoiler offers a more aggressive look and improved aerodynamic benefits.

Crafted with precision, this hand-made carbon fiber spoiler features a higher profile and angular edges that complement the sharp styling of the F82 M4. Its elevated design not only adds a striking visual appeal but also potentially increases downforce by allowing more air to pass underneath, enhancing overall stability at high speeds.

• Aggressive Look: Adds a bold, race-inspired appearance with a higher profile and angular design.
• Enhanced Aerodynamics: Improves downforce with its elevated and aerodynamic shape.
• High-Quality Construction: Made from hand-crafted pre-preg carbon fiber for superior strength and lightweight performance.
• Easy Installation: Comes with 3M tape and an installation manual for a straightforward upgrade.

Elevate your BMW M4's performance and style with this top-tier carbon trunk spoiler from Turner Motorsport.

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
1999-2006 BMW E46 320i 323i 325i 328i 330i 

These 3D Design side skirts were designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, they attach easily and accentuate your BMW's natural body lines, creating a high-class performance look. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Upgrade the aesthetic appeal of your BMW 3-series with the M3 Style Rear Bumper for F30, brought to you by Turner Motorsport. Experience a more aggressive and sporty style reminiscent of the new M3, all in one kit. This conversion kit, including the lower bumper grilles, allows enthusiasts to seamlessly achieve the coveted M3 look on their F30.

• M3 Style Rear Bumper for enhanced aesthetics
• Achieve a more aggressive and sporty 3-series appearance
• Complete kit includes lower bumper grilles
• Seamless conversion for the coveted M3 look
• Turner Motorsport quality and style

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your X5M, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Gloss Black. If you are looking for matte black Acexxon rear reflectors for your X5M, here is the link.

This product fits the following BMWs:
F85 X5M

Having trouble finding the CRT front lip for your E9x M3? Our carbon fiber lip offers CRT styling, constructed with 3K twill weave carbon fiber using vacuum technology for the ultimate light-weight, high-durability front spoiler. 

Our lip utilizes the OEM mounting location for simple and fast installation.

This product fits the following BMWs:
E90/E92/E93 M3 

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3