This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This 3D Design front splitter was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look.
3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
*Does not include mounting support brackets*
This product offers the following:
Solid core, aluminum skinned, composite material
Easily replaceable
Extremely durable and flex resistant at high speeds
Satin Black top finish and unfinished bottom side
This fits the following vehicles:
E36 BMW All
Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.
Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.
Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.
Features:
This item fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2005 - 2010 E60 M5
Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.
Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.
Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.
Features:
This item fits the following BMWs:
1996 - 2004 E39 Sedan 525i 528i 530i 540i
1998 - 2004 E39 Touring 525i 528i 540i
1998 - 2004 E39 M5
RKP's rear diffuser adds aggressive exterior styling to your M2 in just minutes after simple installation.
This product fits the following BMWs:
2016+ F87 M2
HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Product fits the following vehicles:
E46 BMW Non-M Sedan
Experiencing heat soak after a few hot laps? These hood vents measure 22" long - the Extreme Hood Vents are meant for keeping your motor cool in race and big turbo applications. Includes center vent and 2 side vents.
Features:
Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.
This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.
Turner Motorsport highly recommends professional installation - installation requires removal of factory roof.
The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW M3 (And all other e36 coupes with M mouldings)
This front lip for your ///M features the same OEM fit and finish that can be expected of any RKP composite product.
RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.
RKP's Carbon Fiber Roof is a direct replacement roof panel weighing only 7.5 lbs, saving you 60% weight when compared to stock. Not only does it look great on your vehicle, but it saves you valuable weight on your M2. This part is 1x1 weave, we also carry RKP's 2x2 weave piece.
Due to the nature of installation, Turner Motorsport strongly recommends professional installation.
This product fits the following BMWs:
2016+ F87 M2
Keep your motor cool during hot laps with MKAH Motorsports' Large Center Hood Vent.
Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.
This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
These hood vents measure 16" long and 7" wide - the Standard Hood Vents are meant for keeping your NA motor cool during spirited driving or on the track. Does not include center vent.
Features:
Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.
This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
This product was last offered at the strikethrough price on
05-22-2026
The Aluminum V1 adjustable front splitter from Aeroflow Dynamics is a great way to improve aerodynamics as well as add a significantly sportier look to your BMW! Front splitters prevent air from going underneath the vehicle and create an area of high pressure above the splitter, adding downforce for great traction at high speeds and preventing lift.
Features and Specifications:
