Akrapovic Rear Wing Forged Carbon Fiber w/brackets - G42 M240i G87 M2...

T#:37993425

Part#: WI-BM/CA/1/CFKT

In Stock at Vendor

$ 4,800.00 USD

Add to Wish List

Qty

$ 4,800.00 USD

Add to Wish List

Akrapovic Rear Wing Forged Carbon Fiber - G42 M240i G87 M2

The Akrapovic Rear Wing Forged Carbon Fiber - G42 G87 is a premium aerodynamic upgrade designed for BMW M2, M240i, and other compatible models. Crafted from lightweight, handcrafted chopped carbon fibre and finished with a high-gloss lacquer, this rear wing combines striking aesthetics with motorsport-inspired performance. The swan neck design, supported by CNC-machined aluminium brackets, ensures an optimal balance between weight reduction and structural strength. High-grade titanium reinforcements at pivot points enhance durability, while the aerofoil design maximizes downforce and minimizes drag for superior handling. Fully adjustable to three levels, this wing allows drivers to customize their setup for peak performance. ABE approved with KBA 31882 type certification, it is road-legal and features an understated Akrapovič monochrome logo on each side for a refined touch. Optimized using computational fluid dynamics (CFD), this wing ensures minimal air turbulence and noise, making it a perfect fit for BMW G42 and G87 models.

Key Benefits:

Lightweight, handcrafted chopped carbon fibre construction for durability and performance.
High-gloss lacquer finish for a sleek, premium appearance.
Swan neck design with CNC-machined aluminium brackets for optimal weight-to-strength ratio.
High-grade titanium reinforcements for enhanced structural stability.
Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
Fully adjustable to three levels for customizable performance tuning.
ABE approved with KBA 31882 type certification, ensuring road legality.
Optimized using computational fluid dynamics (CFD) for minimal air turbulence and noise.
Compatible with BMW G42 and G87 models.
Kit includes fitting hardware.

Upgrade your BMW with the Akrapovic Rear Wing Forged Carbon Fiber and experience the perfect blend of cutting-edge aerodynamics and premium craftsmanship.

Show More Show Less

Suvneer Performance Side Skirt Extensions - BMW G30 5' W/ M Sport Sid...

T#:51356068

Part#: G30PSIDESPL

Ships in 5 Business Days

$ 233.00 USD

Add to Wish List

Qty

$ 233.00 USD

Add to Wish List

The Suvneer G30 Performance Side Skirt Extension Set is a precision-engineered aerodynamic component for the G-chassis M Sport platform.

ADRO G20 M340i LCI Carbon Rear Winglet Set

T#:27605446

Part#: A14A70-1301

Ships in 3 Business Days

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

The 2023+ BMW G20 M340i LCI Rear Winglet offers an aggressive aesthetic to complete the rear-end of the vehicle. Crafted from premium carbon fiber, this original design is hand-made and offers the best in the market, making it the perfect choice for BMW fans.

Includes:

2 Carbon Diffuser Side Fins
3M Tape
Hardware
Installation manual

Show More Show Less

Suvneer MTech Performance Style Rear Diffuser - BMW F10 535

T#:51285688

Part#: F10PDIFF535

Ships in 5 Business Days

$ 173.00 USD

Add to Wish List

Qty

$ 173.00 USD

Add to Wish List

The Suvneer F10 535i Performance Style Diffuser is a precision-engineered aerodynamic component that integrates seamlessly with the M-Sport rear fascia.

AUTOTECKNIC Dry Carbon Performante Rear Diffuser - G20 M340I PRE-LCI ...

For Pre-LCI And Aftermarket Exhaust Only

T#:20946762

Part#: ATK-BM-0345

Ships in 7 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Made from high-quality materials, this AUTOTECKNIC diffuser will surely give you plenty of style points! Add this carbon diffuser to your car and achieve a new stylish and sporty look!

M Performance Style Dry-Carbon Fiber Side Skirt Extensions - G82 M4 ...

T#:6212270

Part#: G82SIDESPL-DCF

Ships in 5 Business Days

$ 1,625.00 USD

Add to Wish List

Qty

$ 1,625.00 USD

Add to Wish List

M-Performance inspired dry-carbon fiber side skirt extensions for G82 M4. Direct bolt-on, no modification required. Composed of dry-carbon fiber.

ADRO G22 M440i Body Kit

T#:50136724

Part#: G22M440IBKT

Ships in 3 Business Days

$ 3,905.00 USD

Add to Wish List

Qty

$ 3,905.00 USD

Add to Wish List

Give your G22 M440i a more aggressive look with this body kit.

Adro V2 Widebody Kit - G82 M4/M4C/M4CSL

T#:49369912

Part#: A14A11-1101KT

Ships in 3 Business Days

$ 40,000.00 USD

Add to Wish List

Qty

$ 40,000.00 USD

Add to Wish List

Crank the intensity to eleven. The ADRO G82 M4 Carbon Fiber Widebody Kit V2 takes the original formula and turns it up across the board—more aggressive aero, a wider, meaner stance, and a front-end redesign that looks straight out of the paddock. Built around ADRO’s V2 front bumper and V2 vented hood, this next-level widebody doesn’t just bring the looks; it delivers real aerodynamic gains while maintaining OEM-plus fitment and drivability. The V2 package features widened front and rear fenders to increase track width and stability, paired with a fully reengineered front bumper conversion that sharpens airflow management at speed. The updated carbon fiber vented hood improves heat extraction when things get hot, while precision-fit side skirts and a functional rear diffuser clean up airflow along the body. Rounding it out is ADRO’s AT-R3 dual-element swan neck wing, offering adjustable downforce and rock-solid high-speed balance with undeniable motorsport presence. All carbon components are constructed from premium prepreg carbon fiber for maximum strength, reduced weight, and a flawless, consistent weave. The revised front bumper is molded from a lightweight, impact-resistant composite, allowing for more aggressive aero geometry without sacrificing real-world durability. Every piece is CAD-designed, test-fitted, and engineered to integrate seamlessly with the G82 M4 chassis—retaining factory body lines while dramatically expanding stance, grip, and aerodynamic capability. Bottom line: the ADRO G82 M4 Widebody Kit V2 is a full-send evolution. Wider, sharper, and more aerodynamic, it transforms your M4 into something that looks—and performs—like it belongs on the grid.

Show More Show Less

AutoTecknic Dry Carbon Corsa Bumper Trim - F80 M3 | F82/ F83 M4 ...

T#:38655179

Part#: BM-0069

Ships in 7 Business Days

$ 205.00 USD

Add to Wish List

Qty

$ 205.00 USD

Add to Wish List

Designed to seamlessly integrate with various aerodynamic packages on the market, these bumper trims elevate your BMW's aesthetic. In stock and ready for immediate shipment, experience the quality of dry carbon fiber in every detail.

Show More Show Less

Adro Carbon Rear Diffuser - G90 M5

T#:49335150

Part#: A14B30-1301

Ships in 3 Business Days

$ 2,850.00 USD

Add to Wish List

Qty

$ 2,850.00 USD

Add to Wish List

Give the rear of your G90 M5 the upgrade it deserves with the ADRO Carbon Fiber Rear Diffuser — a bold, functional aero enhancement that blends motorsport aggression with factory-level refinement. With its track-inspired geometry and race-ready styling, this diffuser adds visual depth and attitude while keeping the M5’s premium design language intact. Made from ultra-lightweight pre-preg carbon fiber, the diffuser strikes the perfect balance between strength, weight reduction, and show-stopping looks. A tight, consistent carbon weave paired with a deep gloss finish delivers serious visual impact, while the underlying design is all about performance. Using full 3D scans of the G90 chassis and validating the shape through Computational Fluid Dynamics (CFD), ADRO ensured seamless integration with the factory rear bumper — no cutting, trimming, or compromises required. Those sculpted fins and sharp edges aren’t just eye candy. They’re engineered to control airflow, helping reduce rear-end lift and improve stability at higher speeds without hurting daily drivability. Why it deserves a spot on your G90 M5: Pre-preg Carbon Fiber Construction – Lightweight, high-strength carbon fiber with a flawless gloss finish Factory-Accurate Fitment – 3D scanned for precise alignment with the OEM rear bumper CFD-Optimized Aerodynamics – Designed to reduce drag and enhance high-speed stability Track-Inspired Styling – Aggressive fins and crisp lines that elevate the rear profile Bottom line: whether you’re after real aerodynamic gains or simply want a more aggressive rear-end presence, the ADRO G90 M5 Rear Diffuser delivers both. Bolt it on, step back, and let the rear speak for itself.

Show More Show Less

Front Bumper Conversion W/ Fog Light Grilles - M5 Style

For Vehicles with PDC

T#:5944182

Part#: G30M5FT-FG-PDC

Ships in 5 Business Days

Sale - Save 3% $ 926.99

This product was last offered at the strikethrough price on
06-14-2026

$ 899.18 USD

Add to Wish List

Qty

Sale - Save 3%

$ 926.99

This product was last offered at the strikethrough price on
06-14-2026

$ 899.18 USD

Add to Wish List

Are you looking for that M5 look without the Genuine expense? ECS has the solution for you. This M5 replica front bumper is manufactured to genuine specifications. Made from flexible Polypropylene, the fit and finish will have your car looking like a factory M5. Includes the following: M5 Bumper Cover Lower Grille Fog Light Grilles *DOES NOT INCLUDE FOG LIGHTS* Version for vehicles with parking distance control

Show More Show Less

E92 / E93 M-Sport style Bumper Assembly - Single exhaust

T#:371948

Part#: E92MTECHR

Ships in 5 Business Days

Sale - Save 3% $ 856.99

This product was last offered at the strikethrough price on
06-13-2026

$ 831.28 USD

Add to Wish List

Qty

Sale - Save 3%

$ 856.99

This product was last offered at the strikethrough price on
06-13-2026

$ 831.28 USD

Add to Wish List

Upgrade Your Vehicle's Rear Aesthetics with M-Tech Replica Rear Bumper

Traditionally, transforming your BMW into an M-Tech masterpiece meant a costly visit to the dealership parts counter. The expenses associated with converting your car could easily strain your budget. But here's the good news: ECS Tuning offers a cost-effective solution with our high-quality replica parts.

The M-Tech replica rear bumper is a game-changer, delivering a dramatic transformation to your vehicle's rear end. Its design exudes a more aggressive and lowered appearance. What sets it apart is our unwavering commitment to precision – this bumper is crafted to match factory specifications, rendering it virtually indistinguishable from an original M-Tech bumper.

Constructed from OE type plastic, it's primed for painting, allowing you to seamlessly match it to your car's color. As a crucial tip, ECS Tuning suggests conducting a fitment check before you proceed with the painting process. This precaution accounts for potential minor fitment variations due to the unique characteristics of each vehicle.

With the M-Tech replica rear bumper from ECS Tuning, you can achieve the desired M-Tech look without the premium price tag.

Key Features:

High-quality M-Tech replica
Transforms vehicle aesthetics
OE type plastic construction
Precision-crafted to factory specifications
Requires painting to match car color
Fitment check recommended before painting

Show More Show Less

AutoTecknic Carbon Competition Trunk Spoiler - F98 X4M | G02 X4 ...

T#:38789913

Part#: BM-0119-C

Ships in 7 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

The all-new AutoTecknic Competition trunk spoiler for the F98 X4M and G02 X4. This spoiler is made out of light-weight carbon fiber material utilizing a vacuumed forming process to give it superior strength and rigidity. With this brand new design, the AutoTecknic Competition trunk spoiler will give your F98 X4M and G02 X4 a more aggressive look that you've always wanted.

Show More Show Less

Adro AT-R3 Swan Neck Wing - G87 M2

T#:49369905

Part#: A14A90-1501

Ships in 3 Business Days

$ 3,990.00 USD

Add to Wish List

Qty

$ 3,990.00 USD

Add to Wish List

Crank up rear-end grip and visual dominance with the ADRO AT-R3 Swan Neck Wing—a no-compromise, track-developed aero upgrade rooted in Formula 1 engineering. The upright swan neck design keeps airflow clean over the wing surface, minimizing drag while generating serious downforce exactly where it counts. Built from premium pre-preg carbon fiber, this dual-element wing delivers exceptional rigidity and strength at a fraction of the weight—coming in roughly 45% lighter than comparable aluminum setups. CFD-validated for real performance, the AT-R3 produces an impressive 277.7 lbs of downforce at 110 mph, keeping the rear planted and stable when you’re pushing hard. Engineered specifically for the BMW G87 M2 and G42 M240i, the AT-R3 blends race-bred functionality with precise, OEM-plus fitment. Bottom line: if you’re after maximum aero performance with an unmistakable motorsport presence, this wing is the real deal.

Show More Show Less

Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2 ...

T#:37993411

Part#: DI-BM/CA/10/M

In Stock at Vendor

$ 1,938.99 USD

Add to Wish List

Qty

$ 1,938.99 USD

Add to Wish List

Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2

The Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2 is a premium styling upgrade designed to elevate the look and performance of your BMW. Expertly hand-crafted in-house by highly skilled technicians and featuring ABE type approval, this carbon fibre diffuser is engineered to highlight the tailpipes of the Akrapovič Slip-On Line (Titanium) exhaust, delivering a bold and sporty appearance. The matte finish adds a sleek, modern touch, while the lightweight construction ensures improved performance. Available in both high-gloss and matte finishes, this diffuser is a perfect addition to the BMW G87 M2, combining style and functionality.

Key Benefits:

Enhances the sporty and aggressive look of the BMW G87 M2
Showcases Akrapovič Slip-On Line (Titanium) exhaust tailpipes for a standout design
Matte finish provides a sleek and modern aesthetic
Lightweight carbon fibre construction improves performance and durability
Hand-crafted with precision and ABE type approval for superior quality
Available in high-gloss and matte finishes for customization

Upgrade your BMW G87 M2 with the Akrapovic Rear Carbon Fibre Diffuser - Matte Finish and enjoy a perfect blend of style, performance, and craftsmanship.

Show More Show Less

Autotecknic Performance Carbon Fiber Bumper Trim - F80 M3 / F82/ F83 ...

T#:21374129

Part#: ATK-BM-0090

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. This carbon front bumper trim is the perfect addition to your car if you are looking for a more aggressive look with an OEM+ touch! These AutoTecknic Performance Carbon Fiber Bumper Trim will match with all the different aerodynamic packages currently offered on the market.

Show More Show Less

AutoTecknic Performance Dry Carbon Front Lip Set - G06 X6 M-Sport ...

T#:14386798

Part#: BM-0308

Ships in 7 Business Days

$ 1,350.00 USD

Add to Wish List

Qty

$ 1,350.00 USD

Add to Wish List

AutoTecknic's vision is to create the most advanced, innovative, and distinct products to meet the demands of the most discerning clientele. Our core design philosophy of "understand functional elegance" brings the sporty appearance of your X6 M-Sport to new heights. For instance, our lightweight dry carbon fiber front lip set for the G06 X6 M-Sport is uniquely created to enhance the original aggressive design of your vehicle.

Show More Show Less

Vacuumed Carbon Performance Aero Spoiler - F32 4 Series Coupe (MSport...

T#:396202

Part#: BM-0294

Ships in 7 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Is the rear end of your 4-Series boring you? Install our vacuum-formed carbon fiber trunk spoiler to instantly make your rear end more aggressive. Install can be completed in minutes with double-sided adhesive.

For vehicles with M-Sport package only.

This product fits the following BMWs:
2014+ F32 4-Series Coupe 420i 420iX 428i 428iX 435i 435iX

Show More Show Less

Autotecknic Dry Carbon Fiber Fender Trim - G01 X3/G02 X4

T#:5135673

Part#: ATK-BM-0214

Ships in 7 Business Days

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic's dry carbon fiber fender trim covers for the G01 X3 and G02 X4 are 3x3 twill weave dry carbon fiber fender trim covers that have a thickness of 1 millimeter. The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care ensuring their longevity. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Set includes left and right sides.

Show More Show Less

AP Designed F87 Carbon Fiber Front Fenders - F87 M2, M2 Comp, M2 CS ...

T#:25473965

Part#: F87CFENDERS

Ships in 5 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The AP Designed F87 Carbon Fiber Front Fenders are a high-performance and visually striking upgrade for your vehicle. Crafted with precision and attention to detail, these front fenders are specifically designed for the F87 chassis, ensuring a seamless fit and enhanced aerodynamics. Constructed from high-quality carbon fiber materials, these front fenders not only contribute to the overall lightweight design of your vehicle but also add a touch of aggressive styling. The carbon fiber construction not only provides strength and durability but also gives a modern and sporty appearance. Upgrade your vehicle with these premium carbon fiber front fenders, and enjoy the combination of form and function that adds a distinctive edge to your F87 while delivering improved aerodynamics and performance. Key Features: Material: High-quality dry carbon fiber Precision Fitment: Designed for the F87 M2 chassis for a seamless integration Lightweight: Carbon fiber construction reduces weight while maintaining strength Aerodynamic Enhancement: Improves airflow and downforce for better stability Sleek Design: Carbon Fiber light weight with integrated cooling fins. Build Material: Fiber-Reinforced Polymer and Glossy Carbon Fiber Coating We encourage customers to seek professional installation since equipping these products will require the removal of parts currently installed, to better secure fitment to your vehicle

Show More Show Less

Adro Carbon Fiber Side Skirt - G90 M5

T#:49335145

Part#: A14B30-1401

Ships in 3 Business Days

$ 2,150.00 USD

Add to Wish List

Qty

$ 2,150.00 USD

Add to Wish List

Sharpen the side profile of your G90 M5 with the ADRO Carbon Fiber Side Skirts — an OEM-plus upgrade that brings aggressive motorsport styling backed by real aerodynamic intent. Designed specifically for BMW’s latest super sedan, these skirts add visual width and attitude while helping control airflow along the lower body. The end result is a lower, more planted stance that looks factory-correct, just turned up a notch. Built from premium pre-preg carbon fiber, these side skirts offer race-ready strength without unnecessary weight. A tight, consistent carbon weave paired with a deep gloss finish delivers show-quality looks that perfectly match the G90 M5’s muscular character. Using full 3D chassis scans, ADRO engineered these skirts to integrate seamlessly with the factory rocker panels — no trimming, no cutting, no guesswork. Just clean, bolt-on fitment. Refined through Computational Fluid Dynamics (CFD), the design goes beyond aesthetics. The sculpted contours help guide airflow down the sides of the car, reducing turbulence and contributing to improved stability at speed while remaining completely street friendly. **Why they belong on your G90 M5:** * **Pre-preg Carbon Fiber Construction** – Lightweight, high-strength carbon fiber engineered for performance, durability, and a flawless finish * **Factory-Accurate Fitment** – 3D scanned for precise alignment with OEM rocker panels * **CFD-Optimized Aerodynamics** – Designed to manage airflow and reduce drag at speed * **Track-Inspired Styling** – Aggressive contours that visually lower the car and complement the full ADRO aero lineup Bottom line: whether you’re building a show-ready M car or a street-dominating daily, the ADRO G90 M5 Carbon Fiber Side Skirts deliver the perfect blend of form, function, and full-send style.

Show More Show Less

AUTOTECKNIC Dry Carbon Fiber Fender Trim Set - G06 X6

T#:21176945

Part#: ATK-BM-0307

Ships in 7 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

The G06 X6 carries beautiful body lines and design styling. What better way of accentuating this with some carbon? The folks at AUTOTECKNIC have created this dry carbon fender trim set to beautify your already beautiful SAV. Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. The eye catching twill carbon weave is sure to catch some well-deserved attention so don't wait and get yours today! This AutoTecknic Dry Carbon Fiber Fender Trim Set for the G06 X6 will match with all the different aerodynamic packages currently offered on the market.

Show More Show Less

Suvneer MTech Style Rear Bumper - BMW E60 5' Sedan

T#:51180365

Part#: E60MTRR

Ships in 5 Business Days

$ 544.00 USD

Add to Wish List

Qty

$ 544.00 USD

Add to Wish List

Revitalize the rear aesthetic of your BMW 5-Series with the Suvneer E60 M-Tech Style Rear Bumper.

Autotecknic Dry Carbon Fiber Front Bumper Canards - MkV Supra ...

T#:5189165

Part#: ATK-TO-0005

Ships in 7 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's dry carbon fiber front bumper canards are a great upgrade to the MkV Supra's front bumper. The canards are made out of 3K twill weave carbon fiber for light-weight, high-durability, and precise-fitment. These canards assist in increasing front down-force at higher speeds. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Suvneer Carbon Fiber Front Lip - with Fender Extensions - F80/F82/F83...

T#:14584988

Part#: F8XLIPWEXT

Ships in 5 Business Days

Starting at $ 1,150.00 USD

Add to Wish List

Starting at $ 1,150.00 USD

Add to Wish List

We highly encourage customers to have elements of this package paint matched, as the upgraded panels suit the body extremely well. Suvneer Motorsports presents to you a beautiful upgrade to the front end of your F8x M car. This Carbon Fiber front-end package will give you a completely new look.

Show More Show Less

E89 Z4 3D Design Carbon Fiber Side Skirts

T#:390487

Part#: 3104-18911

Ships in 3 Business Days

$ 2,595.00 USD

Add to Wish List

Qty

$ 2,595.00 USD

Add to Wish List

These 3D Design side skirts were designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, they attach easily and accentuate your BMW's natural body lines, creating a high-class performance look.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

AutoTecknic Dry Carbon Corsa Trunk Spoiler - G82 M4

T#:39565543

Part#: BM-0894

Ships in 7 Business Days

$ 289.99 USD

Add to Wish List

Qty

$ 289.99 USD

Add to Wish List

Turner Motorsport offers the AutoTecknic Dry Carbon Corsa Trunk Spoiler for the G82 M4, providing an exclusive upgrade that blends high-performance function with premium aesthetics. Elevate the rear-end presence of your M4 with this beautifully crafted carbon fiber trunk spoiler.

Show More Show Less

Suvneer Performance Diffuser 540 Cutouts - Type 2 - BMW G30 540i w/ M...

T#:51356061

Part#: G30PDIFF540V2

Ships in 5 Business Days

$ 338.00 USD

Add to Wish List

Qty

$ 338.00 USD

Add to Wish List

The Suvneer G30 Type 2 Rear Diffuser is a high-precision aerodynamic component for the G-chassis 540i M Sport platform.

Condor Speed Shop "Rivet-On" Polycarbonate Rear Side Window Kit - E30...

T#:578054

Part#: E30-RQTRWIN

Ships in 2 Business Days

Starting at $ 135.00 USD

Add to Wish List

Starting at $ 135.00 USD

Add to Wish List

Polycarbonate rear 1/4 windows for E30 coupes. Manufactured from high-quality UV protected polycarbonate Approximately 50% weight savings compared to glass Windows are CNC profile cut - ready to fit Windows with NACA duct holes have been pre-drilled for simple installation. Rivet on windows have a small frame/channel pre-cut to simplify painting. NACA duct part numbers, see below. (NACA ducts not included)

Show More Show Less

Carbon Fiber CSL Style Trunk - E46 3 Series coupe

T#:396292

Part#: TL9904BMWE462D-C

Special Order: No Guaranteed ETA

$ 1,260.00 USD

Add to Wish List

Qty

$ 1,260.00 USD

Add to Wish List

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

Proprietary methods to lay wet carbon for a stronger and lighter product
UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
No black paint is used to hide imperfections along detail edges and creases.
Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2002-2006 BMW E46 325ci 330ci

Show More Show Less

AutoTecknic Carbon Fiber Side Skirt Winglets - G42 2-Series

T#:14452860

Part#: BM-0884

Ships in 7 Business Days

$ 550.00 USD

Add to Wish List

Qty

$ 550.00 USD

Add to Wish List

The carbon fiber material is characterized by a high degree of rigidity and stiffness while being remarkably light. Consequently, carbon fiber reinforced plastic is used above all in many areas of motorsport, where visible carbon components fascinate with the mesh structure weaving that is so distinctive of this material. Not least, for this reason, AutoTecknic exterior components exude a high degree of motorsport atmosphere – and are perfectly suitable for effectively sharpening the sporty looks of the latest BMW icons. The AutoTecknic dry carbon side skirt winglets carry all carbon elements connecting the front of the car to the rear while optimizing superior aerodynamics. Satisfy your carbon needs today!

Show More Show Less

Dinan Carbon Fiber Mirror Cover Set - Toyota A90 Supra

Call In Or Chat For Best Price!

T#:21045547

Part#: D980-0040

Ships in 5 Business Days

Sale - Save 10% $ 249.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 249.99

This product was last offered at the strikethrough price on
07-31-2026

$ 224.95 USD

Add to Wish List

Add a touch of style and help your GR Supra stand out from the crowd with Dinan's clear-coated carbon fiber mirror covers that provide a unique, aesthetically-pleasing high-tech appearance. Our mirror cover set provides a cost effective solution to improving the aethetics via an easily installed overlay. You will be sure to impress with Dinan's CF mirror covers on your ride! Features: 2x2 gloss twill dry carbon fiber (pre-preg) manufactured to be impact resistant, durable and strong Clear coated for maximum UV protection and fade resistance Includes 3M double sided tape for easy installation with a clean fit and finish

Show More Show Less

AutoTecknic Dry Carbon Motorsport Rear Spoiler - G80 M3 | G82 M4 ...

T#:14386805

Part#: BM-0317

Ships in 7 Business Days

$ 2,135.00 USD

Add to Wish List

Qty

$ 2,135.00 USD

Add to Wish List

The high-tech material dry carbon is characterized by high rigidity and stiffness while extremely light. Consequently, carbon fiber reinforced plastic is used above all in many motorsport areas, where visible carbon components fascinate with the mesh structure that is so characteristic of this material. Not least, for this reason, AutoTecknic exterior elements exude a high degree of motorsport atmosphere – and are perfectly suitable for effectively sharpening the sporty looks of the latest BMW icons. The distinctive AutoTecknic carbon rear spoiler adds the perfect finishing touch while optimizing aerodynamics. It fits G8X M3 / M4 and G2X 3 / 4-Series

Show More Show Less

Suvneer Highpro Designed F82 Carbon Fiber Trunk Spoiler - F32 4-Serie...

T#:23482950

Part#: F82CFPROSPOILER

Ships in 5 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Presenting the Carbon Fiber Highpro-Style Trunk Spoiler for F82 M4 – a dynamic and aerodynamic enhancement crafted to bestow your M4 with a unique and commanding appearance. Expertly fashioned from lightweight carbon fiber, this spoiler not only injects a touch of high-performance style but also harmonizes effortlessly with the assertive character of your F82 M4. Upgrade your driving experience with this exclusive Highpro-style trunk spoiler – an ideal synthesis of aesthetics and aerodynamics, catering to enthusiasts in pursuit of a distinctive presence on the road.

Show More Show Less

Suvneer MTech Performance Style Rear Diffuser - BMW F10 550i/550ix ...

T#:51285691

Part#: F10PDIFF550

Ships in 5 Business Days

$ 173.00 USD

Add to Wish List

Qty

$ 173.00 USD

Add to Wish List

The Suvneer F10 550i Performance Style Diffuser is a precision-engineered aerodynamic component designed for the M-Sport rear fascia.

BMW F30 M Performance Style diffuser - Single Exit

T#:383335

Part#: 012196ECS10A

Ships in 5 Business Days

Sale - Save 20% $ 327.99

This product was last offered at the strikethrough price on
06-13-2026

$ 262.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 327.99

This product was last offered at the strikethrough price on
06-13-2026

$ 262.39 USD

Add to Wish List

Upgrade the rear appearance of your BMW with the BMW F30 M Performance Style diffuser - Single Exit. This high-quality diffuser enhances the sporty look of your BMW F30 while adding a touch of aggression. Engineered specifically for BMW F30 models, this diffuser offers improved aerodynamics and airflow. Elevate the style and performance of your BMW with this premium M Performance style diffuser.

Enhances the sporty appearance of your BMW F30
Adds aggression and style to the rear of your BMW
Engineered specifically for BMW F30 models
Improves aerodynamics and airflow for enhanced performance

Show More Show Less

Autotecknic Dry Carbon Fiber Performante Aero Splitters - E9x M3 ...

T#:21472895

Part#: ATK-BM-0013

Ships in 7 Business Days

$ 400.00 USD

Add to Wish List

Qty

$ 400.00 USD

Add to Wish List

AutoTecknic's newly released Dry Carbon Performante Aero Splitters for the F90 M5. Designed to smoothly follow the curvature and fit directly onto the lower bumper mounting location for a simple and fast installation. These dry carbon aero splitters are made with pre-preg 3K twill weave carbon fiber and finished off with our UV protected high gloss clear-coat for the ultimate light-weight, high-durability, and precise-fitment splitters in the market. AutoTecknic Dry Carbon Performante Aero Splitters are both highly visible and highly functional. Set your M3 apart from the rest! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

AUTOTECKNIC Carbon Competition Trunk Spoiler - G80 M3

T#:21209816

Part#: ATK-BM-0284

Ships in 7 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

Looking for a more aggressive style spoiler for your G80? Well, look no further for AUTOTECKNIC has you covered! Their carbon competition trunk spoiler is the perfect option if you are looking for a carbon spoiler addition that is high-quality, and aggressive but not over the top. Made using a vacuum seal process, you know you're getting maximum strength and rigidity out of this wing! With great looks, superior quality and easy installation, this trunk spoiler is a need for your ride. Get yours today! This spoiler is made with 100% carbon fiber and comes in a glossy carbon fiber finish. Before each new product is released to the public, they will first undergo rigorous tests and quality control to ensure the quality you'd expect. Just clean the installation surface of the trunk and add double-sided tape to the bottom surface, and the spoiler will be ready for installation. The installation will take no longer than 20 min as no drilling is required.

Show More Show Less

M-Inspired Dry Carbon Mirror Covers

T#:23648653

Part#: ATK-BM-0113-DCG

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Enhance the aesthetic of your vehicle's mirror covers with our exclusive M-inspired design, elevating your BMW's appearance to a sportier and more sophisticated level. Embrace the iconic style reminiscent of motorsport-inspired models, crafted meticulously to OEM dimensions for a flawless fit every time. Our dry carbon mirror covers represent the epitome of carbon fiber excellence. Manufactured using the pre-preg process, the carbon material is placed into a mold and sealed in a vacuum (autoclave) for optimal curing. This method minimizes waste and results in a lighter carbon version compared to the "wet" method. The autoclave vacuuming process ensures fewer pinholes and virtually no air pockets, guaranteeing a premium, high-quality product. To maintain the highest standards, our products undergo rigorous tests and quality control procedures before reaching you. Rest assured, you'll receive a mirror cover that exudes perfection. Specifically tailored for BMW G05 X5 and G06 X6 models, these mirror covers are available in carbon fiber. Elevate your BMW's presence on the road with these premium mirror covers—order now for a touch of sophisticated style and motorsport-inspired allure. Features: Iconic M-inspired mirror covers finished in pre-preg carbon fiber. Elevate the aggressiveness of your BMW with a sleek and sporty appearance. Crafted to perfectly match the OEM counterpart for an impeccable fit. Rigorous quality control procedures and tests ensure construction excellence.

Show More Show Less

ECS M3 Style Rear Bumper Conversion - Single Exhaust

T#:380356

Part#: E92M3RR

Ships in 5 Business Days

Sale - Save 3% $ 740.99

This product was last offered at the strikethrough price on
06-13-2026

$ 718.76 USD

Add to Wish List

Qty

Sale - Save 3%

$ 740.99

This product was last offered at the strikethrough price on
06-13-2026

$ 718.76 USD

Add to Wish List

Add aggressive M styling with this replacement rear bumper. Comes in primer and is ready to be painted and change the demeanor of your BMW.

AUTOTECKNIC Dry Carbon Performante Front Splitter - G20 3-SERIES M-SP...

T#:20946766

Part#: ATK-BM-0343

Ships in 7 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

Made from high-quality fry carbon, this splitter is sure to take your car to a whole new level! The G20 already has a very aggressive style but you can add that further with this AUTOTECKNIC dry carbon Performante front splitter!

Show More Show Less

2019-2020 BMW 3 Series G20 M Sport/M340i Glossy Black ABS 2PC Side Sk...

T#:20848136

Part#: LPSG2019GBMPBN

Ships in 7 Business Days

$ 383.99

This product was last offered at the strikethrough price on
02-09-2026

$ 183.99 USD

Add to Wish List

Qty

$ 183.99 USD

Add to Wish List

Watch your car transform with these Spec-d side skirts!

Competition Center Diffuser - F10 M5

T#:395887

Part#: BM-0350

Ships in 7 Business Days

$ 539.99 USD

Add to Wish List

Qty

$ 539.99 USD

Add to Wish List

We developed this center diffuser from carbon fiber to make the rear end of the M5 more functional and add aesthetic appeal. Our center diffuser is made of 100% true vacuumed carbon fiber for the ultimate weight savings, durability and precision fitment.

Includes one rear center diffuser and mounting hardware. Installation is simple and can be accomplished in your own garage - simply line the diffuser up with your rear bumper and mount using the supplied hardware.

This product fits the following BMWs:
F10 M5

Show More Show Less

AUTOTECKNIC Dry Carbon Fiber Bumper Trim - F97/F98 X3M/X4M (Pre LCI) ...

T#:21209811

Part#: ATK-BM-0306

Ships in 7 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

The F97 and F98 both have a very striking and attractive style. Although they do have some optional carbon additions, there is always room for more. The folks at AUTOTECKNIC have created this front bumper trim piece that replaces the gloss black trim below the kidney grilles. Give the front end of your ride this carbon upgrade is a no-brainer and made from high-quality dry carbon that will stand the test of time! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. This AutoTecknic Dry Carbon Fiber Bumper Trim will match with all the different aerodynamic packages currently offered on the market. Additionally, it can be used to cover up holes and imperfections in the area on the factory bumper.

Show More Show Less

AutoTecknic Dry Carbon Side Skirt Extension Set - G87 M2

T#:39531760

Part#: BM-0808

Ships in 7 Business Days

$ 1,194.99 USD

Add to Wish List

Qty

$ 1,194.99 USD

Add to Wish List

Turner Motorsport offers the AutoTecknic Dry Carbon Side Skirt Extension Set for the G87 M2, providing BMW owners with a high-performance upgrade that enhances both aesthetics and functionality.

Show More Show Less

ADRO F87 M2 Body Kit

T#:50136742

Part#: F87M2BKT

Ships in 3 Business Days

$ 7,150.00 USD

Add to Wish List

Qty

$ 7,150.00 USD

Add to Wish List

Achieve a more aggressive look for your M2 with this body kit.

E92/E93 M Sport 3D Design Carbon Fiber Front Splitter

T#:390478

Part#: 3102-19222

Ships in 3 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

This 3D Design front splitter was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

Suvneer PSM Style Carbon Fiber Trunk Spoiler - BMW G20/G80 3' & M3 ...

T#:51356010

Part#: G20CFPSMSPOILER

Ships in 5 Business Days

$ 278.00 USD

Add to Wish List

Qty

$ 278.00 USD

Add to Wish List

The Suvneer PSM Style Carbon Fiber Trunk Spoiler for the G20/G80 chassis is a precision-engineered aerodynamic component manufactured using advanced composite techniques.

Slimmbones Fog Light Trim With Intake Scoop - Pair - Carbon Fiber - E...

T#:8997695

Part#: SBFCWSCF

Special Order: No Guaranteed ETA

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

The Slimmbones original E39 M5 / 540 M-Sport front bumper fog light trim featuring an intake scoop! This performance fog light trim set allow you to retain your OEM fog lights, while adding secondary air induction to help cool your engine. For over 20 years this family owned company has been using research and development to produce quality, classy yet aggressive after market parts for the E39. Designed and made in the United States, these pre-preg carbon fiber fog light trim replacements are built using sturdy materials, and give a classy yet aggressive look. Includes: Left and right side carbon fiber fog light grilles with air inlets Hardware and tape

Show More Show Less

Autotecknic Carbon Competition Trunk Spoiler - F32 4-SERIES COUPE ...

T#:21308463

Part#: BM-0279

Ships in 7 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

Looking to change the character of your BMW? This carbon fiber rear spoiler is a great way of getting it done. Carbon fiber means no need to paint, this spoiler will add a beautiful and sporty appearance without being overstated. Constructed of high-quality carbon fiber, this spoiler is sure to impress in every way. This spoiler is made with 100% carbon fiber and comes in a glossy carbon fiber finish. Before each new product is released to the public, they will first go through rigorous tests and quality control to ensure the quality you'd expect. The installation will take no longer than 20 min as no drilling is required. Just add double-sided tape to the bottom surface and the spoiler will be ready for installation.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Aero & Body

Sub-Categories

Akrapovic Rear Wing Forged Carbon Fiber - G42 M240i G87 M2

Key Benefits:

Upgrade Your Vehicle's Rear Aesthetics with M-Tech Replica Rear Bumper

Key Features:

Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2

Key Benefits:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results