AutoTecknic Replacement Carbon Fender Trim - F34 3-Series GT - Gran T...

T#:38924626

Part#: BM-0212

Ships in 8 Business Days

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

Enhances your BMW’s exterior with sleek, lightweight, and durable carbon fiber trims, offering a sporty, aggressive look and an easy, OEM-like fit for quick installation.

Acexxon Honeycomb Rear Reflectors, Matte Black - F90 M5

T#:558345

Part#: R23-1-1000-01

Ships in 4 Business Days

$ 120.00 USD

Add to Wish List

Qty

$ 120.00 USD

Add to Wish List

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your M5, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Matte Black. If you are looking for gloss black Acexxon rear reflectors for your M5, here is the link.

This product fits the following BMWs:

F90 M5

Show More Show Less

Autotecknic Dry Carbon Competizione Trunk Spoiler - A90 Supra 2020+ ...

T#:21275550

Part#: ATK-TO-0008

Ships in 8 Business Days

$ 465.00 USD

Add to Wish List

Qty

$ 465.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. This dry carbon rear spoiler will drastically improve your Supra's appearance with a more aggressive look. Made from carbon that has been put through an autoclave process that removes any air bubbles leaving you with a strong, durable, and lightweight material! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

Suvneer MTech Performance Style Rear Diffuser - BMW F10 528i/528xi ...

T#:51285687

Part#: F10PDIFF528

Ships in 6 Business Days

$ 173.00 USD

Add to Wish List

Qty

$ 173.00 USD

Add to Wish List

The Suvneer F10 528i Performance Style Diffuser is a precision-engineered aerodynamic insert designed for the M-Sport rear fascia.

Akrapovic Rear Carbon Fiber Diffuser - Matte Carbon - F91/F92 M8 ...

T#:2706196

Part#: DI-BM/CA/7/M

Back Ordered

$ 2,150.99 USD

Add to Wish List

Qty

$ 2,150.99 USD

Add to Wish List

Matte Carbon Look

HARD Motorsport Fender Flares - BMW E36 Sedan, E36 "ti" Compact ...

T#:390230

Part#: FLARES.E36_4D

Ships on Aug 7, 2026

5% off MSRP $ 485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 460.99 USD

Add to Wish List

Qty

5% off MSRP

$ 485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 460.99 USD

Add to Wish List

The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

Product fits the following vehicles:

E36 BMW Sedan and "ti" models

Show More Show Less

AutoTecknic Smoked Dynamic Sequential LED Turn Signal - G29 Z4 ...

T#:39025554

Part#: BM-0262

Ships in 8 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Enhance your BMW G29 Z4 with the AutoTecknic Smoked Dynamic Sequential LED Turn Signals from Turner Motorsport, and enjoy improved style, safety, and performance on the road.

F32 428/435 3D Design Roof Spoiler

T#:390565

Part#: 3110-23211

Ships in 4 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

This 3D Design roof spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality matte urethane, this spoiler attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

Autotecknic Dry Carbon Extended-Fin Competition Rear Diffuser - G20 3...

Requires M-Performance Rear Valence

T#:21275575

Part#: ATK-BM-0353

Ships in 8 Business Days

$ 500.00 USD

Add to Wish List

Qty

$ 500.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Add some carbon to your M-Performance rear valance! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

ADRO Front Bumper Carbon Fiber Duct Vents - BMW G80 M3, G82/83 M4 ...

T#:41526349

Part#: A14A11-2301

Ships in 4 Business Days

$ 1,110.00 USD

Add to Wish List

Qty

$ 1,110.00 USD

Add to Wish List

Revitalize your BMW G8X's M3/M4 appearance with the ADRO Prepreg Carbon Fiber Duct Vents, exclusively designed for our ADRO Facelift Front Bumper (A14A11-2101). Elevate your vehicle's style and performance with these meticulously crafted, high-quality Prepreg carbon fiber components. NOTE: OEM radiator duct needs to be trimmed to fit the Adro Carbon fiber duct vents.

Show More Show Less

Autotecknic Dry Carbon Fiber Fender Trim - G01 X3/G02 X4

T#:5135673

Part#: ATK-BM-0214

Ships in 8 Business Days

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic's dry carbon fiber fender trim covers for the G01 X3 and G02 X4 are 3x3 twill weave dry carbon fiber fender trim covers that have a thickness of 1 millimeter. The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care ensuring their longevity. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Set includes left and right sides.

Show More Show Less

Akrapovic Chopped Carbon Fibre Mirror Cap Set - Matte - G42 G80 G82 G...

T#:37959674

Part#: WM-BM/CA/5/CF

In Stock at Vendor

$ 1,705.99 USD

Add to Wish List

Qty

$ 1,705.99 USD

Add to Wish List

Akrapovic Chopped Carbon Fibre Mirror Cap Set - Matte - G42 G80 G82 G83 G87

The Akrapovic Chopped Carbon Fibre Mirror Cap Set - Matte - G42 G80 G82 G83 G87 is the ultimate upgrade for BMW enthusiasts looking to enhance the aesthetics and performance of their M2 Coupé, M3, or M4. Designed to perfectly match the sleek lines of these iconic models, these mirror caps are crafted from high-grade, lightweight chopped carbon fibre, ensuring both durability and a premium finish. Handcrafted by skilled specialists, they add a unique touch to your vehicle while seamlessly complementing other Akrapovič carbon-fibre accessories, such as the Slip-On Line (Titanium) exhaust and rear wing. Available in a sophisticated matte finish, these mirror caps are also compatible with M3 and M4 LCI versions, making them a versatile choice for BMW owners.

Key Benefits:

Enhances the exterior aesthetics of BMW M2, M3, and M4 models.
Constructed from lightweight, high-grade chopped carbon fibre for durability and performance.
Handcrafted by skilled specialists for a premium finish.
Complements other Akrapovič carbon-fibre accessories, including exhaust systems and rear wings.
Available in a sleek matte finish for a modern, sophisticated look.
Compatible with M3 and M4 LCI versions for added versatility.

Upgrade your BMW with the Akrapovic Chopped Carbon Fibre Mirror Cap Set and experience the perfect blend of style, performance, and craftsmanship.

Show More Show Less

ADRO G90 M5 Body Kit

T#:50136698

Part#: G90M5BKT

Ships in 4 Business Days

$ 7,945.00 USD

Add to Wish List

Qty

$ 7,945.00 USD

Add to Wish List

Achieve a more aggressive look with this body kit from ADRO

Suvneer Carbon Fiber Diffuser Undertray - BMW G87 M2

T#:51356080

Part#: G87M2SUVDIFTRAY

Ships in 6 Business Days

$ 825.00

This product was last offered at the strikethrough price on
05-03-2026

$ 715.00 USD

Add to Wish List

Qty

$ 715.00 USD

Add to Wish List

Complete the aggressive rear-end transformation of your BMW G87 M2 with the Suvneer Carbon Fiber Diffuser Undertray.

Autotecknic Replacement Black Front Grille Surrounds - F90 M5 ...

T#:5122278

Part#: ATK-BM-0272-GB

Ships in 8 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed replacement grilles composed of 100% non-recycled plastic resulting in an extremely durable frame and an OEM fit. The grilles are painted in a high quality gloss finish. Comes as a set for left and right side. Perfect for replacing lost, damaged, or faded grilles.

Show More Show Less

AUTOTECKNIC Dry Carbon Performance Front Lip - G06 X6 M-SPORT ...

T#:21078408

Part#: ATK-BM-0308

Ships in 8 Business Days

$ 1,250.00 USD

Add to Wish List

Qty

$ 1,250.00 USD

Add to Wish List

With top-notch fry carbon construction, this front lip is sure to bring some new attention to your ride! Coated in a UV-resistant material, your front lip is protected from our sun's harmful rays which can easily fade and damage unprotected components. Change your cars look and get your AUTOTECKNIC lip today!

Show More Show Less

ADRO F97 X3M Body Kit

T#:50241454

Part#: F97X3MBKT

Ships in 4 Business Days

$ 4,580.00 USD

Add to Wish List

Qty

$ 4,580.00 USD

Add to Wish List

Stand out from the other X3M's by adding this body kit from ADRO.

AutoTecknic Dry Carbon Front Bumper Trim Set - X3M LCI

For vehicles with a production date from 08/2021

T#:26938296

Part#: ATK-BM-0033-DCG

Ships in 8 Business Days

$ 675.00 USD

Add to Wish List

Qty

$ 675.00 USD

Add to Wish List

Upgrade your F97 X3M LCI effortlessly with AutoTecknic's Dry Carbon Front Bumper Trim Set. Swap out the standard gloss black trim for a sleek, seamless integration that complements your existing AutoTecknic or OEM components. Crafted with precision from 100% 2x2 twill weave carbon fiber using the Autoclave process, these trims snap into place effortlessly.

The pre-preg carbon fiber construction not only adds minimal weight but also reinforces strength, ensuring durability for your X3M LCI. This race-inspired enhancement elevates your front bumper's aesthetic, injecting a unique and captivating element into your vehicle. Installation is hassle-free, requiring no special modifications. Tailored specifically for the BMW X3M LCI, these trims offer a seamless, polished appearance for your ride.

Maximize the potential of your X3M with AutoTecknic's premium front bumper trim set. Enhance your driving experience and command attention on the road with this meticulously crafted, visually stunning upgrade.

Show More Show Less

Alpha-N F87 M2 Carbon Fender Set

T#:27838479

Part#: AN-0521

Ships in 4 Business Days

$ 3,695.00 USD

Add to Wish List

Qty

$ 3,695.00 USD

Add to Wish List

There’s a reason there are carbon fiber enthusiasts all around the globe. With an unrivaled durability, lightweight feel, and sporty aesthetic, carbon fiber has a way of transforming any car it’s a part of. Looking to add some more of that signature weave to your BMW? That’s where the Alpha N F87 M2 Carbon Fender Set comes in. This fender set is full pre-preg and is constructed in a classic 2x2 carbon fiber weave. Without paintwork, it weighs in at only 980 grams (or 2lbs) vs stock at 6.5lbs! The Alpha N Carbon Fender Set is as lightweight and stylish as they come; if you’re in the market for a fender set, there’s no better part. Product Details: Fits BMW F87 M2 and M2 Competition Saves 4.5lbs EACH over stock from the front of the car Paint/clear coat required for installation

Show More Show Less

T#:395887

Part#: BM-0350

Ships in 8 Business Days

$ 539.99 USD

Add to Wish List

Qty

$ 539.99 USD

Add to Wish List

We developed this center diffuser from carbon fiber to make the rear end of the M5 more functional and add aesthetic appeal. Our center diffuser is made of 100% true vacuumed carbon fiber for the ultimate weight savings, durability and precision fitment.

Includes one rear center diffuser and mounting hardware. Installation is simple and can be accomplished in your own garage - simply line the diffuser up with your rear bumper and mount using the supplied hardware.

This product fits the following BMWs:
F10 M5

Show More Show Less

Carbon Fiber Performance Style Front Splitters - F10 M5

T#:396021

Part#: BM-0015

Ships in 8 Business Days

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

Stand out by adding aggressive exterior styling to your F10 M5 with our carbon fiber front splitters. Autotecknic uses 3K twill weave carbon fiber formed with vacuum technology for the ultimate light-weight, high-durability front splitters.

Splitters screw directly into factory front bumper for fast, simple installation.

This product fits the following BMWs:
2011-2016 F10 M5

Show More Show Less

AUTOTECKNIC Dry Carbon Fender Trim - G05 X5

T#:21012613

Part#: ATK-BM-0096-DCG

Ships in 8 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

It's the small details that matter! These AUTOTECKNIC dry carbon fender trim pieces add a perfect carbon contrast to your car leaving you with a sporty, high-quality look! Satisfy your carbon urge today!

Show More Show Less

Adro BMW G90 M5 Carbon Fiber Front Lip - G90 M5

T#:49335152

Part#: A14B30-1201

Ships in 4 Business Days

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

Engineered specifically for the next-generation BMW M5, the ADRO Carbon Fiber Front Lip adds serious motorsport attitude and functional aero to the G90’s front end. Designed to enhance the factory design rather than overpower it, this lip sharpens the nose, improves airflow, and gives your M5 a lower, more planted stance with true OEM-plus appeal. Built from lightweight, high-strength pre-preg carbon fiber, this front lip delivers the perfect mix of durability, weight reduction, and aggressive styling. A tight, consistent carbon weave paired with a deep gloss finish ensures show-quality looks, while the underlying design is all about performance. Using full 3D scans of the G90 M5, ADRO engineered this piece for factory-accurate fitment that integrates seamlessly with the stock front bumper — no trimming, cutting, or compromises required. Developed using Computational Fluid Dynamics (CFD), the profile is optimized to manage airflow efficiently, balancing downforce and drag to enhance high-speed stability without hurting everyday drivability. Whether you’re carving back roads or simply want a more commanding front-end presence, this lip gets the job done. Why it belongs on your G90 M5: Pre-preg Carbon Fiber Construction – Lightweight, high-strength carbon fiber with a flawless high-gloss finish Factory-Accurate Fitment – 3D scanned for precise alignment with the OEM front bumper CFD-Refined Aerodynamics – Optimized to improve stability by balancing downforce and drag Track-Inspired Styling – Aggressive contours that give the G90 M5 a sharper, more athletic front-end look Bottom line: if you’re looking to elevate your G90 M5’s front-end styling while adding real aerodynamic benefit, the ADRO Carbon Fiber Front Lip delivers. Bolt it on, step back, and let your M car do the talking.

Show More Show Less

Autotecknic Replacement Carbon Fiber Front Grille Surrounds - F97 X3M...

T#:5122262

Part#: ATK-BM-0118-CF-M

Ships in 8 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed replacement carbon fiber grille surrounds composed of 100% Dry carbon fiber material resulting in an extremely durable frame and an OEM fit. The grille surrounds are composed of carbon fiber and the OEM frame is reused. Comes as a set for left and right side. Perfect for replacing lost, damaged, or faded surrounds or if you simply want an upgrade from the normal black inserts. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

AutoTecknic Dry Carbon Performante Rear Diffuser - G42 2-Series M-Spo...

T#:14452863

Part#: BM-0885

Ships in 8 Business Days

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

This rear diffuser is AutoTecknic's newly released dry carbon fiber product for the G42. The diffuser is designed to mount directly onto the lower factory mounting location for a fast and straightforward installation. Manufactured using 100% genuine 3K Twill-Weave (2X2) Pre-Preg Carbon Fiber with our signature autoclave technology, this diffuser is finished with multiple coatings of high-gloss UV-resistant clear coat. Following the weight-saving principles of motorsport ideals, we utilize the autoclave vacuum forming process to produce this diffuser with superior strength and fitment.a

Show More Show Less

Gloss Black Honeycomb Rear Reflector Inserts

T#:18003809

Part#: R13-10-2

Ships in 4 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Tired of looking at those boring bumper reflectors? Acexxon has come up with an OE-inspired solution to elevate the appearance of your car! Acexxon creates their reflector deletes for a number of makes in models in both a satin and high-gloss black finish, with both honeycomb and horizontal slat options to cater to each vehicle's Styling! Product Details: Sold as a pair Gloss Black Finish OEM style fastening for perfect fitment

Show More Show Less

BMW G20 Carbon Fiber Front Lip Spoiler

T#:26271825

Part#: A14A60-1201

Ships in 4 Business Days

$ 1,130.00 USD

Add to Wish List

Qty

$ 1,130.00 USD

Add to Wish List

BMW G20 Carbon Fiber Front Lip Spoiler is a premium enhancement designed for the BMW G20 M340i (Pre-LCI). Expertly crafted by hand using high-quality carbon fiber materials, this front lip spoiler is engineered to offer both superior performance and aesthetic appeal. It has undergone Computational Fluid Dynamics (CFD) testing to ensure optimal fitment and aerodynamic efficiency.

High-Quality Materials: Made from premium carbon fiber for durability and a high-end look.
Precision Fitment: Designed and tested for a perfect fit with the BMW G20 M340i (Pre-LCI), ensuring seamless integration.
Enhanced Aerodynamics: CFD tested to improve airflow and reduce drag, enhancing overall vehicle performance.
Included Accessories: Comes with 3M tape, hardware, and an installation manual for a straightforward setup.
Aesthetic Upgrade: Provides a sleek, sporty appearance that complements the aggressive styling of the M340i.

Installation Note: Easy to install with included hardware and 3M tape, making it a great DIY project for enthusiasts.

Show More Show Less

E90 Sedan 3D Design Carbon Fiber Trunk Spoiler

T#:390542

Part#: 3109-19021

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

This 3D Design trunk spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this spoiler attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

2019-2020 BMW 3 Series G20 M Sport/M340i Glossy Black ABS 2PC Side Sk...

T#:20848136

Part#: LPSG2019GBMPBN

Ships in 8 Business Days

$ 383.99

This product was last offered at the strikethrough price on
02-09-2026

$ 183.99 USD

Add to Wish List

Qty

$ 183.99 USD

Add to Wish List

Watch your car transform with these Spec-d side skirts!

T#:37993411

Part#: DI-BM/CA/10/M

In Stock at Vendor

$ 1,938.99 USD

Add to Wish List

Qty

$ 1,938.99 USD

Add to Wish List

Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2

The Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2 is a premium styling upgrade designed to elevate the look and performance of your BMW. Expertly hand-crafted in-house by highly skilled technicians and featuring ABE type approval, this carbon fibre diffuser is engineered to highlight the tailpipes of the Akrapovič Slip-On Line (Titanium) exhaust, delivering a bold and sporty appearance. The matte finish adds a sleek, modern touch, while the lightweight construction ensures improved performance. Available in both high-gloss and matte finishes, this diffuser is a perfect addition to the BMW G87 M2, combining style and functionality.

Key Benefits:

Enhances the sporty and aggressive look of the BMW G87 M2
Showcases Akrapovič Slip-On Line (Titanium) exhaust tailpipes for a standout design
Matte finish provides a sleek and modern aesthetic
Lightweight carbon fibre construction improves performance and durability
Hand-crafted with precision and ABE type approval for superior quality
Available in high-gloss and matte finishes for customization

Upgrade your BMW G87 M2 with the Akrapovic Rear Carbon Fibre Diffuser - Matte Finish and enjoy a perfect blend of style, performance, and craftsmanship.

Show More Show Less

Dry Cabron Versus Rear Diffuser Kit - F8x M3/M4

T#:20946768

Part#: ATK-BM-0342

Ships in 8 Business Days

$ 945.00 USD

Add to Wish List

Qty

$ 945.00 USD

Add to Wish List

Looking to change the character of your BMW? This carbon fiber rear diffuser is a great way of getting it done. Constructed of high-quality carbon fiber, this diffuser is sure to impress in every way. Carbon fiber means no need to paint, this diffuser will add a beautiful and sporty appearance without being overstated.

Show More Show Less

Acexxon Horizontal Slat Rear Reflectors, Gloss Black - F87 M2 ...

T#:558338

Part#: R01-1-1000-02-G

Ships in 4 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

Tired of looking at those boring bumper reflectors? Acexxon has come up with an OE-inspired solution to elevate the appearance of your car! Acexxon creates their reflector deletes for a number of makes in models in both a satin and high-gloss black finish, with both honeycomb and horizontal slat options to cater to each vehicle's Styling! Product Details: Sold as a pair Gloss Black Finish OEM style fastening for perfect fitment

Show More Show Less

ADRO Carbon Fiber Side Skirt Set - BMW G82 M4

T#:27638766

Part#: A14A40-1401

Ships in 4 Business Days

$ 2,490.00 USD

Add to Wish List

Qty

$ 2,490.00 USD

Add to Wish List

Often overlooked, side skirts can be the final touch that can pull an entire build together. The ADRO carbon fiber side skirt kit is designed to accent the factory body of the G8X M3/M4 while flowing perfectly with the other carbon fiber pieces available for this platform. Featuring real carbon fiber construction and a design that was created to look great and increase downforce, this side skirt kit is everything the G8X needed and more. Includes: Left and Right Carbon Side Skirts 3M Tape and Install Hardware

Show More Show Less

Autotecknic Replacement Carbon Fiber Front Grille Surrounds - F90 M5 ...

T#:5122252

Part#: ATK-BM-0274-CF-1

Ships in 8 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed replacement carbon fiber grille surrounds composed of 100% Dry carbon fiber material resulting in an extremely durable frame and an OEM fit. The grille surrounds are composed of carbon fiber and the OEM frame is reused. Comes as a set for left and right side. Perfect for replacing lost, damaged, or faded surrounds or if you simply want an upgrade from the normal black inserts. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Autotecknic Replacement Carbon Fiber Front Grille Surrounds - F87 M2 ...

T#:5122261

Part#: ATK-BM-0117-CF

Ships in 8 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed replacement carbon fiber grille surrounds composed of 100% dry carbon fiber material resulting in an extremely durable frame and an OEM fit. The grille surrounds are composed of carbon fiber and the OEM frame is reused. Perfect for replacing lost, damaged, or faded surrounds or if you simply want an upgrade from the normal black inserts. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Suvneer Highpro Designed F82 Carbon Fiber Trunk Spoiler - F32 4-Serie...

T#:23482950

Part#: F82CFPROSPOILER

Ships in 6 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Presenting the Carbon Fiber Highpro-Style Trunk Spoiler for F82 M4 – a dynamic and aerodynamic enhancement crafted to bestow your M4 with a unique and commanding appearance. Expertly fashioned from lightweight carbon fiber, this spoiler not only injects a touch of high-performance style but also harmonizes effortlessly with the assertive character of your F82 M4. Upgrade your driving experience with this exclusive Highpro-style trunk spoiler – an ideal synthesis of aesthetics and aerodynamics, catering to enthusiasts in pursuit of a distinctive presence on the road.

Show More Show Less

AUTOTECKNIC Dry Carbon Performante Front Splitter - G20 3-SERIES M-SP...

T#:20946766

Part#: ATK-BM-0343

Ships in 8 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

Made from high-quality fry carbon, this splitter is sure to take your car to a whole new level! The G20 already has a very aggressive style but you can add that further with this AUTOTECKNIC dry carbon Performante front splitter!

Show More Show Less

AUTOTECKNIC Performance Dry Carbon Splitter Set - F95 X5M

T#:21209813

Part#: ATK-BM-0027

Ships in 8 Business Days

$ 450.00 USD

Add to Wish List

Qty

$ 450.00 USD

Add to Wish List

Made from high-quality dry carbon, this splitter set from AUTOTECKNIC was made with meticulous crafting and design to ensure a proper fit and finish leaving you with a stunning carbon result. Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to cure appropriately. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Take your car's appearance to the next level and get yours today!

Show More Show Less

Condor Speed Shop Polycarbonate Rear Side Window Kit - E10 2002 Coupe...

T#:578159

Part#: E10-QTRWIN

Ships in 2 Business Days

Starting at $ 135.00 USD

Add to Wish List

Starting at $ 135.00 USD

Add to Wish List

2 piece poly-carbonate motorsport side window kit to fit the BMW 2002 Coupe only. Kit includes a passenger side quarter window and a driver side quarter window. Manufactured from high-quality Lexan UV protected polycarbonate Approximately 50% weight saving compared to glass Windows are CNC profile cut ready to fit Windows with NACA duct holes have been pre-drilled for simple installation. NACA duct part numbers, see below. (NACA ducts not included)

Show More Show Less

F22 228/M235 3D Design Carbon Fiber Trunk Spoiler

T#:390549

Part#: 3109-22211

Ships in 4 Business Days

$ 1,225.00 USD

Add to Wish List

Qty

$ 1,225.00 USD

Add to Wish List

This 3D Design trunk spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this spoiler attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Plus Trunk Spoiler - G80 M3 ...

T#:21209818

Part#: ATK-BM-0284-PLUS

Ships in 8 Business Days

$ 375.00 USD

Add to Wish List

Qty

$ 375.00 USD

Add to Wish List

Looking for a more aggressive style spoiler for your G80? Well, look no further for AUTOTECKNIC has you covered! Their carbon competition trunk spoiler is the perfect option if you are looking for a carbon spoiler addition that is high-quality, and aggressive but not over the top. Made using a vacuum seal process, you know you're getting maximum strength and rigidity out of this wing! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. With great looks, superior quality and easy installation, this trunk spoiler is a need for your ride. Get yours today! Before each new product is released to the public, they will first undergo rigorous tests and quality control to ensure the quality you'd expect. Just clean the installation surface of the trunk and add double-sided tape to the bottom surface, and the spoiler will be ready for installation. The installation will take no longer than 20 min as no drilling is required.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Aero & Body

Sub-Categories

Akrapovic Chopped Carbon Fibre Mirror Cap Set - Matte - G42 G80 G82 G83 G87

Key Benefits:

Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2

Key Benefits:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results