Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-22-2026
MINI R50 R52 Base Short Ram Intake System - Black is a top-tier performance enhancement designed for MINI enthusiasts seeking the best in engine intake systems. This intake system utilizes Injen's patent-pending MR Technology to ensure optimal gains and maintain a safe air/fuel ratio, benefiting from years of industry expertise and real-world testing.
This intake system is designed to deliver superior performance and reliability, making it an excellent choice for MINI enthusiasts.
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.
Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!
With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.
Key benefits:
Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:
Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
ECS High-Flow Intake for E46 – Unleash Performance and Induction Sound
Transform your E46 driving experience with the ECS High-Flow Intake, engineered for improved airflow, exhilarating induction noise, and a noticeable performance boost. Designed as a direct replacement for your restrictive factory intake, this system lets your engine breathe freely while delivering the aggressive intake sound every enthusiast craves.
Why Upgrade?
The factory intake system prioritizes refinement over performance, limiting airflow and muffling the intake noise for a subdued driving experience. The ECS intake changes the game by significantly increasing air intake efficiency and enhancing the auditory excitement under your hood. It’s a must-have for those seeking the perfect balance of power and sound.
Featured in Action:
Catch this intake in action on the ECS YouTube channel's "Chasing Down Track Times at Pitt Race!" episode, see and hear the difference for yourself.
Key Benefits:
Increased Airflow: Boosts intake efficiency by approximately 27%, flowing an average of 71 CFM more than the stock system.
Enhanced Induction Noise: Enjoy the raw, satisfying sound of air rushing into your engine.
Factory Compatibility: Maintains the stock air induction track and MAF location, allowing a seamless switch back to the factory airbox if needed.
Premium Design Features:
Constructed from durable, lightweight 6061 and 5052 aluminum with a wrinkle-black powder coat finish.
Includes a 7” oiled cotton gauze ECS filter for optimal filtration and airflow.
Silicone intake boot with improved flow replaces the failure-prone factory accordion boot, featuring provisions for F-connector and Idle Air Control (IAC) valve.
Stainless steel M6 hardware and aluminum brackets ensure a secure and reliable installation.
Complete Kit Contents:
Silicone inlet
Aluminum MAF flange
Mounting bracket
7” ECS filter (red)
Seals, clamps, and hardware for easy installation
Upgrade your E46 with the ECS High-Flow Intake for a driving experience filled with power, sound, and excitement. Breathe new life into your engine – order now!
MINI R52 R53 Cold Air High Performance Air Intake enhances engine performance with its innovative design. This intake system is designed for the MINI Cooper S R53 (2002-2006) and the R52 MINI Cooper S Convertible. It features an integral heat shield made from low thermal conductivity composite to prevent engine heat from affecting the intake air. The heat shield is engineered to channel cold air directly from the OE high-pressure intake system. The kit includes a high-performance Racing Dynamics air filter, a composite heat shield for optimal insulation, and all necessary mounting hardware. Updated with a blue filter, it also comes with detailed installation instructions.
This product was last offered at the strikethrough price on
09-29-2026
This product was last offered at the strikethrough price on
09-29-2026
Introducing the do88 Intake System for BMW 320i and 330i G20 – Engineered for Maximum Performance!
At do88, we understand that filtration, airflow, and heat management are crucial when designing an intake system for turbocharged engines.
Our intake system is designed to provide the turbo with excellent filtration, an optimized airflow path, and consistently low inlet temperatures. One of the key challenges with the B48/B46 engine is the intake system’s location near the exhaust manifold, which generates intense heat and causes rapid heat soak.
High intake air temperatures (IATs) can significantly reduce engine performance, as hot, less dense air makes it harder for the turbo to build boost efficiently. To address this, our fully sealed intake system minimizes heat exposure and maintains low IATs. However, fully sealed systems can face airflow restrictions due to the factory airbox’s single air feed. We resolved this by adding a secondary air feed and incorporating a heat shield into the airbox design to block heat from the exhaust manifold. The large 7” airbox ensures ample airflow around the filter and accommodates strut braces.
We replaced the stock intake hose with a high-flow 102mm (4”) mandrel-bent aluminum pipe paired with a custom silicone hose. The system also features a custom-designed air filter with tightly woven cotton gauze for exceptional filtration. The filter is washable, reusable, and built for long-lasting performance.
Unlike the stock air filter box and intake hose, which are designed with silencers to reduce turbo and induction noise, the do88 system eliminates these elements. This allows for a more pronounced and engaging turbo spool and induction sound, giving you a truly dynamic driving experience.
Turner Carbon Fiber Intake System – G30 B58
The G30 540i may look understated, but its B58 engine is anything but. Give your 5 Series the performance upgrade it deserves with the Turner Carbon Fiber Intake, expertly designed for optimal airflow and a serious aesthetic upgrade. This intake system delivers a substantial 45-50% increase in airflow over the restrictive stock setup, resulting in better throttle response, more power, and the exhilarating sound of turbocharged induction.
Key Features:
Increased Airflow: Boosts intake flow by up to 50% for improved throttle response and performance. Turbo Sounds: Enjoy the full range of turbo whistle and induction noise, enhancing the driving experience. Carbon Aesthetics: Sleek carbon fiber design fits perfectly within the OEM engine bay for a clean, high-performance look. No Modifications Needed: Direct fitment into the factory location, maintaining OEM standards. Performance Specs:
Stock intake: 2.5 inH2O: 172.1 CFM 7.5 inH2O: 313.2 CFM Turner Carbon Intake: 2.5 inH2O: 253.9 CFM 7.5 inH2O: 456.6 CFM Designed using advanced laser scanning technology and 3D CAD modeling, this intake seamlessly replaces the stock resonator to unleash the thrilling turbo sounds the B58 engine is known for. The result is a significant improvement in both performance and auditory excitement.
Turner Motorsport Charge Pipe – G Chassis B58
Factory charge pipes are notorious for cracking under increased boost, leading to leaks and reduced performance. The Turner Motorsport Charge Pipe is engineered from 4-ply reinforced silicone and durable 6061-T6 anodized aluminum, providing the strength to withstand higher boost levels while improving airflow and throttle response.
Charge Pipe Highlights:
Boost-Ready: Reinforced to handle increased boost without cracking or leaking. Optimized Airflow: Smooth transition from turbo outlet to throttle body for maximum performance. Durable Construction: 6061-T6 anodized aluminum fittings ensure long-lasting reliability. Why Upgrade?
Performance: Maximize airflow, throttle response, and turbo spool with this intake and charge pipe combo. Aesthetics: Carbon fiber and anodized aluminum components add a premium look to your engine bay. Sound: Experience the raw sound of turbo flutter and induction noise with the resonator-free intake system.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Upgrade your Mini's air intake system with the M7 Speed MAXX-FLO(TM) fresh air system, designed for Generation 2 MINIs with N14 & N18 Turbocharged engines. This system replaces the restrictive stock air box with a sturdy aluminum frame, providing increased airflow, engine performance, and a unique sound to your Mini. With easy installation and durable construction, the MAXX-FLO(TM) kit offers an array of features for an enhanced driving experience.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Upgrade your Mini with the M7 Speed MAXX-FLO (TM) fresh air system, specially designed for Generation 2 MINIs including R55 through R59 models equipped with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. This system replaces the restrictive stock air box with a sturdy heavy gauge aluminum frame, ensuring seamless installation via factory mounting points. Included in the MAXX-FLO(TM) kit is a low restriction foam air filter that amplifies airflow, improves engine performance, and adds a compelling sound to your Mini.
TECH NOTES: If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car. If using a stock scoop, removal of the factory blocking plate is recommended. This product has passed C.A.R.B. approval.
