Find Parts That Fit Your Vehicle

BMW Intake Manifold Components (DISA, Vacuum, CCV, Etc)

The intake manifold takes incoming air from the intake and distributes it to each cylinder. Over the years the manifolds have gotten more sophisticated and complex. Most of the additional work that it does is emissions-related - recirculating vapors back into the engine to be re-used. But there are also performance innovations such as BMW's DISA variable intake runners. All of the modern innovations have a part behind it and here you will find replacement components.

In some BMW models there are performance improvements with intake manifolds. These intake manifold upgrades use mostly BMW parts and are a direct replacement for your stock manifold. We offer manifolds and kits to make the conversion work easier.

Sub-Categories

Sort By:

Flapper Delete Fitting - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557962
Part#: VTT-FLAPPER-DELE
Ships in 10 Business Days
$ 57.99 USD
Free Shipping
$ 57.99 USD
Free Shipping

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less
Genuine BMW - Corporate Logo
T#:13027
Part#: 11617531423
Ships in 1 day
6% off MSRP $ 148.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.99 USD
Free Shipping
6% off MSRP
$ 148.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or solid oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create a oil sludge condition that is impossible to clear. Thankfully, the CCV is replaceable on the early N52 engines (2006) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2006-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
Show More Show Less
Genuine BMW - Corporate Logo
T#:37039
Part#: 11657605374
In Stock
4% off MSRP $ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping
4% off MSRP
$ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping


Genuine BMW Vacuum Tank -
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13

Fits BMW Engines including:
N63,N63N,S63N


Genuine BMW - Corporate Logo
T#:222870
Part#: 13628637900
Ships in 1-2 days
8% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
8% off MSRP
$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
Rough idling and slow acceleration are 2 common signs of a failing Tmap sensor. Take the time to replace this to get your car running at 100% again.

Genuine BMW - Corporate Logo
T#:19200
Part#: 11617560538
Ships in 1 day
6% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD
Free Shipping
6% off MSRP
$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD
Free Shipping
The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits cars with N52 or N51 engine - not N52N models. This is the smalller of the 2 DISA Valves on this motor it is considered the "Upper Disa valve". The lower DISA valve is part number 11617579114

This item fits the following BMWs:
2008-2013 E82 BMW 128i (N51 Engine Only)
2006 E90 BMW 330i 330xi - Sedan
2006-2011 E90 BMW 328i 328xi 328i xDrive (N51 Engine Only) - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive (N51 Engine Only) - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive (N51 Engine Only) - Coupe
2007-2013 E93 BMW 328i (N51 Engine Only) - Convertible
2006-2010 E60 BMW 530i 530xi
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0si
2011-2012 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less
Genuine BMW - Corporate Logo
T#:19213
Part#: 11611736656
Ships in 1-2 days
2% off MSRP $ 261.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 255.99 USD
Free Shipping
2% off MSRP
$ 261.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 255.99 USD
Free Shipping


Genuine BMW Gasket-Flange -
This item fits the following BMW Chassis:
E38

Fits BMW Engines including:
M70,M73,M73N,S70


Genuine BMW - Corporate Logo
T#:12626
Part#: 11151705237
Ships in 1-2 days
6% off MSRP $ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 165.99 USD
Free Shipping
6% off MSRP
$ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 165.99 USD
Free Shipping


Genuine BMW Oil Separator -
This item fits the following BMW Chassis:
E53 X5

Fits BMW Engines including:
M62

Genuine BMW - Corporate Logo
T#:12506
Part#: 11617545382
Ships in 1-2 days
2% off MSRP $ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.99 USD
Free Shipping
2% off MSRP
$ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.99 USD
Free Shipping


Genuine BMW Sucking Jet Pump -
This item fits the following BMW Chassis:
E39,E46

Fits BMW Engines including:
M54


Genuine BMW - Corporate Logo
T#:41708
Part#: 13411312707
Ships in 1-2 days
2% off MSRP $ 115.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.99 USD
Free Shipping
2% off MSRP
$ 115.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.99 USD
Free Shipping


Genuine BMW Hose
This item fits the following BMW Chassis:
E34 M5,E34

Fits BMW Engines including:
S38


Genuine BMW - Corporate Logo
T#:340670
Part#: 11157848155KT
Ships in 1-2 days
$ 1,085.99 USD
Free Shipping
$ 1,085.99 USD
Free Shipping
The crankcase breather, or also commonly called the PCV or oil separator, allows the crankcase to expel air without losing any oil. When failing, the PCV can cause misfires and a rough running commonly experienced at idle. This kit allows you to service your breather system and keep your vehicle's emissions system in top shape and running great.
Show More Show Less
Genuine BMW - Corporate Logo
T#:367717
Part#: 11721427912
Ships in 3 Business Days
2% off MSRP $ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping
2% off MSRP
$ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping
Pierburg - Corporate Logo
T#:393595
Part#: 11667556919
In Stock
$ 343.99

This product was last offered at the strikethrough price on
06-14-2026

$ 196.99 USD
Free Shipping
$ 196.99 USD
Free Shipping

High-Quality Vacuum Pump for Improved Performance

Enhance your vehicle's vacuum system with this premium vacuum pump. Engineered to mount effortlessly on the side of the cylinder head block, this replacement unit is the ideal fix for noisy or damaged vacuum pumps. It guarantees the correct vacuum supply to the master cylinder and optimizes boost levels, leading to improved performance and reliability for your vehicle.

The package comes complete with a sealing o-ring for your convenience.

Show More Show Less


Genuine BMW - Corporate Logo
T#:7189
Part#: 13411433627
Ships in 6 Business Days
6% off MSRP $ 558.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 525.99 USD
Free Shipping
6% off MSRP
$ 558.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 525.99 USD
Free Shipping


Genuine BMW T-Shape Idle Regulating Valve -
This item fits the following BMW Chassis:
E30,E36

Fits BMW Engines including:
M42

Turner Motorsport - Corporate Logo
T#:587464
Part#: 003313TMS01KT2
Ships in 1-2 days
Sale - Save 20% $ 3,345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2,676.79 USD
Free Shipping
Sale - Save 20%
$ 3,345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2,676.79 USD
Free Shipping
The E46 CSL M3 is world-renowned as one of the finest cars BMW produced. Covered with parts exclusive to the CSL model, the intake system is one of the most sought after components for non-CSL owners. The performance rewards are just as great as the sound, a true symphony to an enthusiast's ear. The Turner Motorsport CSL Style intake takes the legendary BMW design and improves it, by altering and improving the OEM CSL airbox we have achieved a 20% increase in airflow of the factory airbox and also marginally improved flow over the BMW designed CSL box! This complete kit includes everything (except a tune) to completely transform your M3 in an afternoon. *Will require the use of an Alpha N tune*
Show More Show Less
URO Intake Air Adjustment Unit/DISA Valve
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:568320
Part#: 11617560538
In Stock
$ 200.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD
Limited Qty Sale
Free Shipping
$ 200.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD
Limited Qty Sale
Free Shipping
This DISA valve is actually located in the Intake manifold. Considered to be the upper DISA valve.

BMW N52 3.0L Air Adjustment Unit/DISA Valve
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:583440
Part#: 11617579114
Ships in 1 Business Day
Sale - Save 12% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.32 USD
Free Shipping
Sale - Save 12%
$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.32 USD
Free Shipping
Having idle problems and low RPM hesitation? Located next to the intake manifold.

Turner Oil Separator Kit - E39 M54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:555298
Part#: 11617501566KT6
Ships in 3 Business Days
Sale - Save 19% $ 181.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.02 USD
Free Shipping
Sale - Save 19%
$ 181.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.02 USD
Free Shipping

The plastic hoses and oil separator can crack or become faulty, leading to vacuum leaks or oil leaks. This is caused by the stress the plastic components are exposed to during heating and cooling cycles, especially if the vehicle is not brought up to operating temperature during driving in cold weather climates.

This kit includes the needed hoses, oil separator, mounting grommet, and hardware.

Fits the following BMWs:
2000-2003 E39 BMW 530i

Show More Show Less
CSL Style Intake - Matte
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:599514
Part#: 003313TMS0102KT2
Ships in 1-2 days
Sale - Save 20% $ 2,549.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2,039.99 USD
Free Shipping
Sale - Save 20%
$ 2,549.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2,039.99 USD
Free Shipping
The Famous Euro Only M3 CSL Intake, redesigned for maximum air intake. Constructed & Finished entirely in matte Carbon

Genuine BMW - Corporate Logo
T#:41767
Part#: 13417839097
Ships in 1-2 days
4% off MSRP $ 207.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 198.99 USD
Free Shipping
4% off MSRP
$ 207.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 198.99 USD
Free Shipping


Genuine BMW Tubing -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

Billet 1/2" Check Valve - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557954
Part#: VTT-CHECK-1
Ships in 1 Business Day
$ 36.99 USD
Free Shipping
$ 36.99 USD
Free Shipping

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

CSF - Corporate Logo
T#:8154081
Part#: 8200S
In Stock
$ 299.00 USD
Free Shipping
$ 299.00 USD
Free Shipping
CSF is continually updating and adding new products In an effort to help customers achieve the highest level of competition in motorsports. CSF is pleased to release the latest B58 performance product. The CSF B58 Thermal Rejection Competition Spacer (CSF #8200S). The CSF B58 Thermal Rejection Competition Spacer is the next level upgrade for the B58 Super Manifold (CSF #8200 - ES4389640). Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Spacer Height = 6.5mm Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Can withstand temps up to 1100°F and is as strong as Aluminum Self-Sealing and do NOT require gaskets, silicon products, or sealing agents of any kind. Tested on @peppa_aka_skull’s (1000HP) A90 Supra by Visconti Tuning Includes installation hardware and instructions Highly recommended for Drag/Roll-Racing Applications where vehicles typically sit in staging lanes in-between racing Limited Lifetime Warranty Will NOT work with the OEM Manifold The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The B58 Super Manifold is made from Billet Aluminum and 100% Tig Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. The CSF Thermal Rejection Competition Spacer was designed for vehicles competing in motorsports who demand the absolute best cooling in order to gain a competitive edge. With that being said, there are significant advantages to adding this spacer upgrade to any vehicle with the CSF B58 Super Manifold installed.
Show More Show Less

CSF - Corporate Logo
T#:2498426
Part#: 8200
EO#: D-770
Ships in 3 Business Days
$ 4,299.00 USD
Free Shipping
$ 4,299.00 USD
Free Shipping
Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:6061725
Part#: VTT-N54ITKM
Ships in 10 Business Days
Starting at $ 1,322.99 USD
Free Shipping
Starting at $ 1,322.99 USD
Free Shipping
VTT is proud to release their center feed N54 intake manifold. Vargas performed CAE/Multiphysics simulation for both steady and unsteady state operating conditions in order to bring real-world performance benefits to your N54 build. This manifold is stronger, outflows the OEM manifold, and installs just as easily as your stock piece (no custom charge pipe or throttle body harness required). Available in five different finishes! Features: Full billet production using aircraft 6061-T6. NOT sheet metal Can be run Direct Injection only, or allows for EASY addition of Port Injection to any N54 engine with no plates, or bad injection angles DI Kit Contents: ​Pi Block off plugs to seal the ports for a compact design, no blocked off fuel rails All fittings, or plugs for Vacuum/Boost ports PI Kit Contents: ​Complete fuel rail with required fittings All hose connections required to run fuel lines using genuine Parker 801 hose and AN fittings All fittings, or plugs for Vacuum/boost ports Optional Injector Choice DI only completely removes the fuel rail for a compact look. Flow optimized for increased horsepower at top of the RPM band A variety of ports on the bottom, which allow you to run any of modular setups for PCV, vacuum needs A significant advantage in flow over stock manifold at top of the RPM range Weight is 13.6 lbs. With the Fuel Rail Option for additional injectors provided by DeatschWerks (550cc or 1000cc) Controller for port injection available separately
Show More Show Less
Rein - Corporate Logo
T#:402120
Part#: 11617544806
Ships in 3 Business Days
$ 246.99 USD
Free Shipping
$ 246.99 USD
Free Shipping
Air adjustment unit controls the path of the air in the intake manifold, allowing either a shorter or longer runner length. A common source of trouble causing low RPM sluggishness and accompanied by a clicking sound from the engine bay.
Show More Show Less


Eventuri - Corporate Logo
T#:600008
Part#: EVEE9XCFPLMWKT
Ships on Oct 19, 2026
$ 3,160.00 USD
Free Shipping
$ 3,160.00 USD
Free Shipping
Introducing the E9X M3 Carbon Fiber Plenum from Eventuri. Made from 100% high-grade prepreg carbon, including the internal trumpets, this plenum replaces the stock plastic version and unleashes the roar of the naturally aspirated BMW V8 engine. Since the trumpet lengths are tuned by BMW to the internal volume, changing this could result in a loss of performance, so Eventuri kept the same volume to not upset the way the car drives in terms of power delivery. Although there isn’t a performance gain from the carbon plenum, the induction sound generated takes the driving experience of the M3 to a whole new level. The raw V8 rumble gives the M3 an almost CSL like sound and is a truly intoxicating experience. Eventuri went through several iterations using different carbon thicknesses to fine-tune the sound, and the resulting plenum generates an almost unbelievable induction volume and tone.
Show More Show Less
CSF - Corporate Logo
T#:13891866
Part#: 8233B
Ships in 3 Business Days
$ 6,995.00 USD
Free Shipping
$ 6,995.00 USD
Free Shipping
An absolute must-need for anyone with a high-horsepower S58 build. ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM. Includes everything you need, plug and play!
VTT CNC ORB Plug - -10AN
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:642075
Part#: VTT-10ORB
Ships in 10 Business Days
$ 23.99 USD
Free Shipping
$ 23.99 USD
Free Shipping

Pierburg - Corporate Logo
T#:14640
Part#: 11667558344
Ships in 1 day
$ 233.16 USD
Free Shipping
$ 233.16 USD
Free Shipping
This is the OEM Peirberg Power brake booster vacuum pump for BMW's with the N51 or N52 6 cylinder engines.

This item fits the following BMWs:
2008-2013 E82 BMW 128i Coupe
2006-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2004-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i 528i xDrive
2008-2010 E83 BMW X3 3.0si
2011+ F25 BMW X3 xDrive28i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less

Genuine BMW - Corporate Logo
T#:7274
Part#: 13641358917
Ships in 1-2 days
6% off MSRP $ 472.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 444.99 USD
Free Shipping
6% off MSRP
$ 472.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 444.99 USD
Free Shipping
This Genuine BMW starter valve adds additional fuel on cold start to enrich the mixture for easier starting. If you are having cold start problems we recommend you check this injector and the temperature sensor that controls this valve.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1982-6/1987 E24 BMW 633csi 635csi
1981-1987 E23 BMW 733i 735i
Show More Show Less
Genuine BMW - Corporate Logo
T#:32283
Part#: 11157567802
Ships in 1 day
2% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD
Free Shipping
2% off MSRP
$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD
Free Shipping


Genuine BMW Return Pipe -
This item fits the following BMW Chassis:
E90

Fits BMW Engines including:
N52


Genuine BMW - Corporate Logo
T#:12455
Part#: 11617533400
Ships in 1-2 days
2% off MSRP $ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 117.99 USD
Free Shipping
2% off MSRP
$ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 117.99 USD
Free Shipping
GENUINE BMW PRESSURE REGULATING VALVE:117059

We sell this part as part of a larger kit that includes all the hoses required BMW Crankcase Vent, PCV, and Oil Separator Systems
Show More Show Less
Genuine BMW - Corporate Logo
T#:22213
Part#: 11157567801
Ships in 1-2 days
4% off MSRP $ 184.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.99 USD
Free Shipping
4% off MSRP
$ 184.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.99 USD
Free Shipping


Genuine BMW Return Pipe -
This item fits the following BMW Chassis:
E85,E86,E90

Fits BMW Engines including:
N52


Genuine BMW - Corporate Logo
T#:381405
Part#: 11617579114KT
Ships in 1 day
$ 920.99 USD
Free Shipping
$ 920.99 USD
Free Shipping

BMW N52 Disa Valve Kit - with hardware is an essential upgrade for BMW owners experiencing low RPM sluggishness and unwanted clicking noises from the engine bay. This air adjustment unit is designed to control the airflow path in the intake manifold, enabling either shorter or longer runner lengths for optimal performance. The kit comes complete with all necessary hardware for an easy installation.

Benefits:

  • Enhanced Performance: Improves airflow management for better engine efficiency and responsiveness.
  • Eliminates Sluggishness: Addresses common issues associated with low RPM performance, restoring your BMW's power.
  • Noise Reduction: Reduces unwanted clicking sounds originating from the engine bay, contributing to a quieter operation.
  • Complete Kit: Includes all required hardware for straightforward installation, making it an ideal choice for DIY enthusiasts.

Upgrade your BMW's performance with the BMW N52 Disa Valve Kit - with hardware today!

Show More Show Less

Genuine BMW - Corporate Logo
T#:36524
Part#: 11617547186
Ships in 1-2 days
4% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD
Free Shipping
4% off MSRP
$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD
Free Shipping


Genuine BMW Vent Pipe - Zyl. 5-8
This item fits the following BMW Chassis:
E53 48IS,E53 X5,E63,E65

Fits BMW Engines including:
N51,N62

Turner Motorsport - Corporate Logo
T#:221961
Part#: TMS221961
Ships in 7 Business Days
$ 482.99 USD
Free Shipping
$ 482.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:
  • 11617531423, Genuine BMW oil separator
  • 11617559530, vent hose
  • 11157522931, oil separator hose
  • 11157567802, return hose
  • 11157537701, extraction hose
  • 11617547242, intake manifold gaskets (set of 6)
    The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

    The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

    This kit fits the following BMWs:
    10/2005+ E90 BMW 325xi 330xi - Sedan
    10/2005+ E91 BMW 325xi - Wagon
    10/2005+ E60 BMW 525xi 530xi
  • Show More Show Less
    Genuine BMW - Corporate Logo
    T#:224083
    Part#: 11158636540
    In Stock
    12% off MSRP $ 282.76

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 250.00 USD
    Free Shipping
    12% off MSRP
    $ 282.76

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 250.00 USD
    Free Shipping


    Genuine BMW Set, Oil Separators, Cylinder Head Cover -

    This item fits the following BMW Chassis:
    E70,E71,F01,F02,F10,F12,F13,

    This item fits the following BMW Engines:
    N63,S63,

    Show More Show Less


    Genuine BMW - Corporate Logo
    T#:215829
    Part#: 11158647962
    Ships in 1-2 days
    5% off MSRP $ 525.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 501.99 USD
    Free Shipping
    5% off MSRP
    $ 525.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 501.99 USD
    Free Shipping


    Genuine BMW Vent Pipe - 11158647962
    Genuine BMW - Corporate Logo
    T#:216970
    Part#: 11158647298
    Ships in 1-2 days
    4% off MSRP $ 223.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 213.99 USD
    Free Shipping
    4% off MSRP
    $ 223.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 213.99 USD
    Free Shipping
    Genuine Bmw Connecting Line - 11158647298
    Genuine BMW - Corporate Logo
    T#:2881
    Part#: 11617544806
    Ships in 1-2 days
    6% off MSRP $ 438.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 411.99 USD
    Free Shipping
    6% off MSRP
    $ 438.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 411.99 USD
    Free Shipping
    The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits E46 325i with M54 engine, E39 525i, E60 525i 2004-2005 - X3 2.5i - Z3 2.5i Z4 2.5i

    This item fits the following BMWs:
    2001-2005 E46 BMW 325i 325ci 325xi only with M54 engine
    2001-2003 E39 BMW 525i
    2004-2005 E60 BMW 525i 525xi
    2004-2006 E83 BMW X3 2.5i
    2000-2002 Z3 BMW Z3 2.5i
    2003-2006 E85 BMW Z4 2.5i
    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:13022
    Part#: 11611438404
    Ships in 1-2 days
    3% off MSRP $ 469.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 454.99 USD
    Free Shipping
    3% off MSRP
    $ 469.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 454.99 USD
    Free Shipping
    This Genuine BMW DISA valve for the M44 4 cylinder engine changes the intake runner length to provide better performance.

    This item fits the following BMWs:
    1996-1998 E36 BMW 318i 318is 318ti 318ic
    1996-1998 Z3 BMW Z3 1.9
    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:6704
    Part#: 11151747066
    Ships in 1-2 days
    5% off MSRP $ 76.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 72.99 USD
    Free Shipping
    5% off MSRP
    $ 76.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 72.99 USD
    Free Shipping


    Genuine BMW Oil Separator -
    This item fits the following BMW Chassis:
    E34,E38,E39

    Fits BMW Engines including:
    M60,M62

    Genuine BMW - Corporate Logo
    T#:207691
    Part#: 11617810765
    Ships in 1-2 days
    2% off MSRP $ 227.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 222.99 USD
    Free Shipping
    2% off MSRP
    $ 227.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 222.99 USD
    Free Shipping
    Failure of this component can be identified by rough idling, decreased mpg, and many others. These symptoms usually mean its time for replacement. Genuine BMW Venturi - This item fits the following BMW Chassis: F25 X3,F30,F31
    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:212378
    Part#: 11617823244
    Ships in 1-2 days
    2% off MSRP $ 378.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 370.99 USD
    Free Shipping
    2% off MSRP
    $ 378.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 370.99 USD
    Free Shipping


    Genuine BMW Venturi -
    This item fits the following BMW Chassis:
    F15

    Fits BMW Engines including:
    N57N

    Genuine BMW - Corporate Logo
    T#:43187
    Part#: 13717547593
    Ships in 1-2 days
    2% off MSRP $ 103.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 101.99 USD
    Free Shipping
    2% off MSRP
    $ 103.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 101.99 USD
    Free Shipping
    This component is part of your vehicle's intake system and helps deliver air to the engine. Any cracked or wearing components can lead to your engine not receiving a suitable amount of air and can lead to future issues.
    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:32266
    Part#: 11157501565
    Ships in 1-2 days
    3% off MSRP $ 71.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 69.99 USD
    Free Shipping
    3% off MSRP
    $ 71.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 69.99 USD
    Free Shipping


    Genuine BMW Regulating Valve - Zyl.1-6
    This item fits the following BMW Chassis:
    E38

    Fits BMW Engines including:
    M73,M73N


    Genuine BMW - Corporate Logo
    T#:377891
    Part#: 11617501563KT1
    Ships in 1-2 days
    $ 137.99

    This product was last offered at the strikethrough price on
    09-03-2026

    $ 135.99 USD
    Free Shipping
    $ 135.99 USD
    Free Shipping
    Genuine BMW - Corporate Logo
    T#:290
    Part#: 13541318319-K
    Ships in 1 day
    $ 619.32 USD
    Free Shipping
    $ 619.32 USD
    Free Shipping
    The E30 M3 Intake Manifold Gasket is a common part to fail, resulting in an idle fluctuation and/or a run-lean condition. This is a pair of gaskets.

    This item fits the following BMWs:
    1988-1991 E30 BMW M3
    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:375194
    Part#: 11157840446KT1
    Ships in 1 day
    $ 392.99

    This product was last offered at the strikethrough price on
    07-06-2026

    $ 390.99 USD
    Free Shipping
    $ 390.99 USD
    Free Shipping


    Genuine BMW - Corporate Logo
    T#:22351
    Part#: 11611406637
    Ships in 1-2 days
    3% off MSRP $ 208.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 201.99 USD
    Free Shipping
    3% off MSRP
    $ 208.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 201.99 USD
    Free Shipping
    This Genuine Intake manifold gasket mounts between the intake manifold and the cylinder head on the right side of the engine for cylinders 1-4. It should e replaced anytime the manifold is removed from the car.
    When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

    This item fits the following BMWs:
    2000-2003 E39 BMW M5
    2000-2003 E52 BMW Z8 Roadster
    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:375196
    Part#: 11157840446KT3
    Ships in 1 day
    $ 397.99

    This product was last offered at the strikethrough price on
    07-06-2026

    $ 395.99 USD
    Free Shipping
    $ 395.99 USD
    Free Shipping