Due to weak plastic construction, the factory plastic crankcase ventilation breather hose is known to fail. After years of exposure to piping-hot engine bay temperatures and chemical-laden oil vapors, the corrugated plastic tubing can crack, crumble, or fail altogether.

We set out to bulletproof your N20 PCV system with a durable silicone breather hose, designed to provide a comprehensive upgrade and permanent replacement for the factory plastic hose. By replacing the flimsy, heat-hardened OEM plastic hose with a four-ply fluorosilicone hose, you'll experience peace of mind knowing your N20 is free from the inevitable return of oil leaks, vacuum leaks, and drivability concerns that would have been.

This breather hose is found at the front of the engine, and is used to connect the inlet pipe to the valve cover. It replaces OEM part number 11127588417.

Features:

Silicone construction ensures a durable replacement that is sure to outlast OE plastic
Designed as a direct replacement for the factory breather hose
Retains heating function and OE electrical connector
Design:

Four-ply wire-reinforced fluorosilicone hose is designed to resist degradation due to exposure to oil vapors
O-rings are pre-installed in OE connectors for a lasting seal
Includes pre-installed zinc-coated hose clamps for durability and corrosion resistance
Product Development:

Our Silicone PCV Hose Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

This kit includes everything to fit an OBDI M50 manifold to an OBDII M52 or S52 engine (1996-1999). It takes the guesswork out of adding the M50 manifold to your engine. The kit includes a CNC machined adapter, with all hardware and gaskets, that allows the freer flowing M50 manifold to be installed while maintaining full function of M52/S52 components including factory PCV cyclone / oil seperator valve. No vacuum leaks, no check engine lights. And the entire kit is completely reversible. Turner Motorsport has dealt with the problems from other kits and this adapter block is by far the best solution.

The base price of this kit does not include the M50 manifold. You can pick up a used manifold from a 1992-1995 E36 325i or a 1995 M3 3.0 liter. You can find them in local junk or scrap yards, online at Craigslist or eBay, or from various forums. If you would rather not deal with the potential pitfalls of a used part, we can offer a new Original BMW manifold to go with the adapter. While expensive, the new manifold is guaranteed to be in perfect condition with no cracks, warping, or foreign objects hidden inside. A new factory BMW manifold can be added to your order by selecting the option above.

With the introduction of the 1996 model year came the OBDII emissions compliant engine. Among the many changes the OBDII engines received was a more restrictive air intake manifold. Where the older M50/S50 engines continued to make power up in the higher RPMs, the newer M52/S52 ran out of breath, limiting high-end horsepower, but boosting low-end torque. Converting the OBDII cars to the 1995 and earlier OBDI manifold is a popular modification to remove this high-rpm restriction.

To best maximize the horsepower gains of this modification, you should be using the M50 manifold with bigger cams, HFM, injectors, and software. We have found this combination of upgrades and software to yield the best results for producing top-end power. Note: using the M50 manifold shifts the power band higher in the RPM range. This is GREAT for track cars but not well-suited for street cars where the OBDII manifold works best to produce torque at lower RPM. Presently, we do not have software tuned for only the M50 manifold without cams or the HFM upgrade. Check our website again for future product releases. We currently offer custom mapped Shark Injectors for these packages:
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/stock OBDII manifold
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/M50 manifold

Optional fuel rail cover. The standard M52/S52 fuel rail cover is too tall for the M50 manifold and does not have the proper brackets for securing it in place over the fuel rail. We can correctly modify the stock M52 fuel rail cover for you to complete the factory appearance.

Download PDF Installation Instructions

Introducing the Turner Motorsport Bavarian Autosport Idle Control Valve for BMW M50, M52, and M54 engines. This crucial component, situated in the intake system, addresses common idle issues experienced by BMW owners. Enhance your BMW's performance and ensure smooth idling with this Idle Control Valve.

• Turner Motorsport's Bavarian Autosport Idle Control Valve for M50, M52, M54 engines.
• Targets and resolves common idle issues.
• Promotes smooth and consistent idling.
• Essential for maintaining optimal engine performance.
• Reliable component for BMW enthusiasts.

Upgrade your BMW's idle control system with the Turner Motorsport Bavarian Autosport Idle Control Valve, ensuring a seamless driving experience.

The ultimate intake for the E46 M3, made from prepeg carbon fiber in the same weave as the Genuine airbox for a OE look. The Karbonius airbox also features carbon fiber intake trumpets in place of the factory's plastic trumps, and are finished to a ultra smooth finish for perfect airflow.

OPTIONAL ESS E46 M3 Alpha-N E-Flash ECU Tuning Software

Upgrade your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Silicone CCV Hose today!

Due to weak plastic construction, the factory plastic crankcase ventilation breather hose is known to fail. After years of exposure to piping-hot engine bay temperatures and chemical-laden oil vapors, the corrugated plastic tubing can crack, crumble, or fail altogether.

We set out to bulletproof your N52 CCV system with a durable silicone breather hose, designed to provide a comprehensive upgrade and permanent replacement for the factory plastic hose. By replacing the flimsy, heat-hardened OEM plastic hose with a four-ply fluorosilicone hose, you'll experience peace of mind knowing your N52 is free from the inevitable return of oil leaks, vacuum leaks, and drivability concerns that would have been.

This breather hose is found at the front of the engine, and is used to connect the oil separator to the valve cover. It replaces OEM part number 11157522931.

Features:

Silicone construction ensures a durable replacement that is sure to outlast OE plastic
Designed as a direct replacement for the factory breather hose
Retains heating function and OE electrical connector
Design:

Four-ply wire-reinforced fluorosilicone hose is designed to resist degradation due to exposure to oil vapors
O-rings are pre-installed in OE connectors for a lasting seal
Includes pre-installed zinc-coated hose clamps for durability and corrosion resistance
Product Development:

Our Silicone CCV Hose Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our Turner S65 Carbon Intake is a monster that perfectly compliments the high revving 4.0l V8 engine. Add in a full carbon plenum and you have a recipe for greatness! The intake benefits start right at the motor; the plenum offers a larger interior volume and full carbon design which helps boast the intoxicating roar. Directly connected to the plenum is a full carbon intake tube with a substantially larger cross sectional area with smooth transitions which results in more airflow available to the engine in high demand scenarios. The inlet tube mounts securely to the full carbon heat shield and is mounted in factory airbox locations while retaining the factory cold air induction tract from the hood. Housed inside the heat shield is a behemoth cone filter to ensure proper filtration and maximize airflow. Turner's S65 intake and plenum is designed with air flow and induction in mind. The intake flows like no other; during testing, the Turner intake outperformed the flow-bench at over 750CFM, a massive improvement over the factory intake.

Here are the benefits:

Full carbon plenum and intake for a full engine bay transformation
You get a beautiful carbon heatshield, one of the only full carbon fiber heatshields available.
All the flow - the air on demand will make sure your engine always has room to breathe.
Increased throttle response.
Added induction noise for an intoxicating driving experience.
PART DESIGN:

Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment
Full Carbon Plenum construction with internal bracing and velocity stacks
Hood Inlet Scoop - Directs the flow of cool, ambient air to the heat shield, and directly into the air filter. Seals off with the factory rubber gasket on the lower side of the hood inlet.
Full Carbon Fiber Heat Shield Assembly that utilizes OEM air box mounts and integrates with the factory air intake tract from the hood.
Monstrous 9" cone air filter to maximizes filtration that is able to be serviced/cleaned.
7"x5" Carbon Fiber Inlet Tube providing smooth, direct airflow from the behemoth air filter directly into the plenum.
Fully compatible with the OEM Secondary Air Injection emissions system. Factory hose lock and location.
Full carbon fiber plenum with bracing and carbon velocity stacks.
KIT CONTENTS

Carbon Fiber Plenum
Carbon Fiber Heat Shield
Carbon Fiber Intake Tube
Plenum Silicone Coupler
9" Cone Air Filter
Installation Hardware
PRODUCT DEVELOPMENT

Turner S65 Intake System was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish

Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish is the ultimate performance and style upgrade for BMW E46 M3 enthusiasts. This high-quality carbon fiber snorkel is designed to replicate the renowned CSL design, enhancing airflow efficiency and engine performance while providing a sleek, race-inspired aesthetic. Made with a premium 2x2 carbon fiber weave and finished with a durable matte coating, it offers the perfect balance of form and function. Available through Turner Motorsport, this component ensures authenticity and precision engineering for the discerning BMW owner.

Key Benefits

• Precision-crafted for seamless fitment on BMW E46 M3 models
• Improves airflow for optimized S54 engine performance
• Constructed with a 2x2 carbon fiber weave for superior strength and lightweight durability
• Matte finish adds a modern, sporty aesthetic to the engine bay
• Inspired by the legendary CSL design for an authentic motorsport upgrade
• Available exclusively from trusted BMW performance specialists, Turner Motorsport

Elevate your E46 M3’s performance and style with the Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish, a must-have for enthusiasts aiming to achieve the ultimate driving experience.

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54