Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Upgrade the shifting precision and feel of your BMW with Turner Motorsport Powerflex Shifter Carrier Street Bushings - Oval. Made of 90A urethane, these bushings replace the stock rubber ones to prevent sloppy shifting. The stiff urethane reduces play without adding vibration. Easy to install when the carrier is out of the car, these bushings ensure improved performance. Here are the key benefits:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Shifter Arm Rear Bushing & Bracket for the BMW F2X, F3X, F87 M2, F80 M3, F82, and F83 M4 is designed to improve gear shifting precision and reduce the play and movement in the gear shifter assembly. This bushing and bracket kit replaces the factory rubber bushing with a stiffer polyurethane bushing, which helps enhance the overall feel and responsiveness of the shifter.
This upgrade is ideal for drivers looking for a more precise, performance-oriented driving experience with their BMW.
The BMW Shifter Carrier Arm Bushings - Oval are essential components designed to support and stabilize the shifter assembly in various BMW models. These bushings ensure a firm and accurate connection between the shifter carrier arm and the vehicle chassis, resulting in smoother, more precise gear shifts.
Oval Design for Stability:
Enhanced Shifting Accuracy:
Durable and Long-Lasting:
Improved Driving Experience:
Easy Installation:
Wide Compatibility:
In summary, the BMW Shifter Carrier Arm Bushings - Oval are a crucial upgrade for drivers looking to improve the performance and feel of their shifter. With enhanced durability, improved shifting precision, and a better driving experience, these bushings are a valuable investment for any BMW enthusiast.
BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.
Installation Note: Designed for street use and compatible with standard clutch systems.
The Powerflex Rear Diff Front Mount Bushing for the BMW E46 3 Series and Z4 is a premium upgrade designed to enhance the stability and performance of the drivetrain. Here’s an alternative description:
High-Performance Polyurethane: Powerflex bushings are made from advanced polyurethane, which is significantly more durable than standard rubber. This material resists wear, deformation, and the effects of heat, oil, and contaminants, making it a long-lasting solution for high-performance applications.
Purpose: The rear differential front mount is subjected to high levels of stress during acceleration and cornering. Over time, the stock rubber bushing can degrade, causing excessive movement in the differential. The Powerflex bushing eliminates this movement, allowing for improved drivetrain control and reducing unwanted flex.
Key Features:
Benefits:
Fitment: This bushing is designed as a direct replacement for the front mount of the rear differential in BMW E46 3 Series and Z4 models. It installs easily, without requiring modifications, and offers an immediate improvement in drivetrain response.
In summary, the Powerflex Rear Diff Front Mount Bushing is an essential upgrade for BMW E46 and Z4 drivers who want to improve drivetrain rigidity, reduce flex, and enhance overall performance. This bushing provides a durable, long-lasting solution that’s perfect for both street and track use, delivering better power transfer and handling.
4o
The BMW Shifter Carrier Arm Bushings - Round are crucial components designed to enhance the performance and functionality of the shifter assembly in various BMW models. These bushings provide critical support for the shifter carrier arm, improving the overall shifting experience and driving dynamics.
High-Quality Material:
Enhanced Shifting Precision:
Improved Shift Quality:
Simple Installation:
Wide Compatibility:
In summary, the BMW Shifter Carrier Arm Bushings - Round are essential for enhancing the performance and feel of the shifter in various BMW models. By improving shifting precision and overall driving dynamics, these bushings are a valuable addition for any BMW owner looking to elevate their driving experience.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
BMW G8X Rear Diff Front Mounting Bushing (Street) is a high-performance upgrade designed to enhance the stability and control of the BMW G8X's rear differential. This bushing features a robust construction combining CNC-machined aluminum and high-quality polyurethane to provide superior drivetrain support and minimize deflection.
The Powerflex Heritage Rear Differential Mount for the BMW E46 M3, available through outlets like Turner Motorsport, is an ideal upgrade for enthusiasts seeking to enhance the performance and durability of their car's rear differential while preserving its classic appearance. The Heritage Series is tailored for those who prefer a more subtle aesthetic than the brightly colored bushings typical of Powerflex's standard line.
Key features:
Turner Motorsport often emphasizes the balance of performance and OEM-like comfort with these mounts, making them an excellent choice for those wanting to upgrade their rear differential mounting without detracting from the car's original feel.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Transfer Case Bushing Insert for BMW X5 E70, X6 E71, and X6 F16 is a quick and effective upgrade designed to improve the stability of the transfer case. Made from durable polyurethane, this insert reinforces the factory rubber bushing, reducing excess movement in the transfer case during acceleration and cornering.
Ideal for enhancing drivetrain performance without complex modifications.
The PFF5-220 Lower Torque Mount Bracket & Bushing (Yellow 70A and Purple 80A) serves as an exceptional replacement for the OE mount, addressing issues related to cracking and excessive engine movement. Offering a remarkable 300% stiffness compared to the OE counterpart, it's recommended for fast road use in standard or mildly tuned cars. With a CNC machined aluminum lower torque mount and various durometer bushing options, it significantly enhances on/off throttle handling and gear shifting precision. Moreover, it simplifies replacement with a hassle-free installation requiring just two bolts, omitting the need for pressing out any rubber. While delivering improved handling, it may introduce a slight increase in NVH, especially at idle, dependent on the chosen material's stiffness.
MINI R56 N14 N18 Upper Engine Mount Insert is crafted from high-quality Yellow 70A durometer material, offering a perfect balance of strength and compliance. This insert enhances performance by reducing engine movement while minimizing noise, vibration, and harshness (NVH) inside the cabin. Ideal for both gas models and high-torque tuned diesel models, it ensures a smoother and more responsive driving experience.
OEM Part Numbers: 22114050886 / 22 11 4 050 886, 22116782374 / 22 11 6 782 374, 4050886 / 6782374.
MINI F56 Gearbox Mount Insert Kit - Street is designed to enhance the rigidity of the gearbox mount by filling the voids in the original rubber. This kit offers an effective and affordable solution to improve performance while maintaining street-friendly comfort.
The Powerflex Rear Sway Bar Bushing - 18.5 mm Street for the BMW X3 (2003-2010) is a premium suspension upgrade designed to replace the factory rubber bushings with high-performance polyurethane. This bushing specifically fits rear sway bars with a 18.5 mm diameter, providing better durability and handling for street-focused driving.
The Powerflex Rear Diff Front Mount Bushing - Flat Type for the BMW E38 7 Series and E39 5 Series is a premium suspension component designed to replace the factory rubber bushing in the front mount position of the rear differential. This high-performance polyurethane bushing is engineered to enhance drivetrain stability and improve overall vehicle performance, making it an ideal upgrade for drivers seeking longevity and sharper handling.
Flat-Type Design: This bushing is built with a flat-type design, which ensures a direct replacement fit for the factory-installed bushing in the front mount of the rear differential. It aligns perfectly with the BMW E38 and E39 chassis, providing an accurate and secure fit without the need for modifications.
Polyurethane Material: Powerflex bushings are constructed from high-quality polyurethane, which offers superior durability compared to traditional rubber. This material is highly resistant to wear, heat, and degradation from oils and road contaminants, ensuring that the bushing remains effective for a much longer period under both normal and performance driving conditions.
Enhanced Drivetrain Control: The rear diff front mount bushing plays a critical role in controlling the movement of the rear differential during acceleration, deceleration, and cornering. Powerflex's polyurethane bushing limits excessive movement and reduces drivetrain flex, leading to more consistent power delivery, reduced differential "clunking," and a smoother, more precise ride.
Improved Handling: By stiffening the front mount of the rear differential, this bushing enhances the stability and control of the rear suspension, particularly during aggressive driving. Drivers will notice a reduction in body movement and improved handling characteristics, allowing for more confident cornering and better overall vehicle dynamics.
Direct Replacement for OEM Bushings: Designed to replace the original rubber bushing without any additional modifications, this bushing fits seamlessly into the existing suspension setup of the BMW E38 7 Series and E39 5 Series. Installation is straightforward, and the bushing is engineered to match the factory specifications while offering a significant performance upgrade.
Long-Lasting Durability: Polyurethane bushings are designed to withstand harsh conditions and prolonged use, far outlasting the OEM rubber components. This bushing resists cracking, warping, and deterioration over time, ensuring that it maintains its structural integrity and performance even after years of use.
For BMW E38 7 Series and E39 5 Series owners looking for a reliable, long-lasting upgrade, the Powerflex Rear Diff Front Mount Bushing - Flat Type delivers improved handling, enhanced drivetrain control, and a more responsive driving experience. This is a vital upgrade for maintaining the performance and reliability of your rear suspension system.
The Powerflex Rear Differential Front Bushings for the BMW E60 5-Series and E63 6-Series are specifically engineered to optimize the performance of the rear differential assembly. By replacing the factory rubber bushings with robust polyurethane, these bushings provide numerous benefits that enhance vehicle handling and stability.
Enhanced Power Delivery: The firmer polyurethane material reduces flex and movement in the differential mount, ensuring better alignment and stability. This improvement leads to more effective power transfer from the engine to the wheels, resulting in enhanced acceleration and performance.
Increased Longevity: Powerflex bushings are designed to withstand harsh driving conditions, resisting wear from heat, oil, and road debris. Unlike conventional rubber bushings, which can deteriorate over time, these polyurethane bushings maintain their performance over a longer period.
Improved Handling Dynamics: By minimizing unwanted movement in the rear differential, these bushings enhance the vehicle’s handling characteristics. Drivers will experience reduced body roll and increased traction, allowing for a more controlled and confident driving experience, especially in high-performance situations.
Superior Road Feel: The stiffer construction of these bushings enhances feedback to the driver, improving steering response and overall road feel. This connection allows for a more engaging driving experience, as drivers can better sense the vehicle’s dynamics.
Simple Installation: These bushings are specifically designed to fit the E60 and E63 models directly into the existing differential mounts. The installation process is straightforward, requiring no modifications, which makes it an accessible upgrade for DIY enthusiasts.
This upgrade is perfect for BMW E60 5-Series and E63 6-Series owners seeking to enhance their vehicle’s rear differential performance and overall handling capabilities. The Powerflex Rear Differential Front Bushings offer a reliable solution for improving the effectiveness of the rear suspension system, making them suitable for everyday driving as well as spirited performance applications.
The Powerflex Rear Diff Bushing for BMW Z3, E30 3 Series, and 318Ti is a high-performance replacement for the factory rubber bushings in the rear differential. This upgrade is ideal for improving handling, power delivery, and drivetrain stability, especially on aging vehicles where the original bushings may have deteriorated.
Polyurethane Construction: Unlike the OEM rubber bushings, Powerflex bushings are made from durable polyurethane, which resists wear from exposure to heat, oil, and road debris. This increases the longevity of the bushing and ensures consistent performance over time.
Handling Improvements: The stiffer polyurethane material significantly reduces the flex and movement of the differential during acceleration, braking, and cornering. This helps improve the overall stability and precision of the vehicle’s rear-end, enhancing cornering performance and delivering better power transfer to the wheels.
Versions for Different Needs:
Direct Fitment: These bushings are designed as direct replacements for the stock bushings, making installation relatively straightforward. This is especially useful for older models like the E30 and Z3, where original bushings may have degraded or cracked, causing clunking noises and excessive differential movement.
Performance Gains: With reduced differential movement, drivers can expect sharper throttle response, improved traction under load, and better cornering dynamics, making it a perfect upgrade for those who want to refresh and enhance the performance of their BMW's rear suspension.
This Powerflex rear diff bushing upgrade is ideal for anyone looking to improve the handling characteristics of their BMW while adding durability and reliability to the drivetrain setup.
The Powerflex Rear Differential Rear Mount Bushings for the BMW E39 5 Series are designed to provide a significant upgrade to the vehicle's rear differential system by replacing the stock rubber bushings with high-performance polyurethane. This enhancement leads to improved handling, stability, and durability.
Enhanced Differential Control: The stiffer polyurethane material reduces unwanted movement and flex in the differential mount, ensuring better alignment and stability under load. This translates to improved power delivery and handling during cornering and acceleration.
Increased Longevity: These bushings are crafted to resist wear and degradation from oil, heat, and road debris, offering superior durability compared to traditional rubber bushings. This longevity ensures that the performance benefits are maintained over time.
Improved Driver Feedback: By minimizing movement in the rear differential, these bushings enhance the connection between the vehicle and the driver. This results in better feedback and control, allowing for a more engaging driving experience.
Direct Fit for Easy Installation: Designed specifically for the E39 5 Series, these bushings fit directly into the existing differential mounts, facilitating a hassle-free installation process without the need for modifications.
This upgrade is perfect for BMW E39 5 Series enthusiasts who want to improve their vehicle's handling and performance, making it suitable for both daily driving and spirited performance applications. The Powerflex Rear Differential Rear Mount Bushings provide a reliable solution to enhance the overall effectiveness of the rear suspension system.
Enhance your BMW's performance and stability with Powerflex polyurethane engine mount bushings. Engine mounts play a crucial role in stabilizing the engine, and OEM rubber bushings might compromise retention due to excessive movement. Powerflex polyurethane bushings offer firmer support, reducing engine movement and maximizing engine retention compared to OEM rubber bushings. Here's why Powerflex stands out:
Use Powerflex Copper Grease PCG1 for easy installation and extended service life. Opt for Powerflex Street Bushings for street-driven or occasional autocross/track vehicles. For dedicated track cars, choose Powerflex Black Series Bushings, 25% stiffer than street bushings with a 95A durometer polyurethane. Plus, Powerflex offers a lifetime warranty to the original purchaser on all products.
MINI R50 to R53 Performance Polyurethane Gearbox Bushing Set is designed to enhance engine stability and performance by reducing unnecessary movement. Unlike OEM rubber bushings, which prioritize comfort over function, these Powerflex polyurethane bushings offer increased firmness and durability. This set minimizes engine and transmission movement, ensuring more precise and controlled driving dynamics. Powerflex, Europe's leading manufacturer of suspension bushings, uses advanced polyurethane material and precision manufacturing to create bushings that outperform and outlast factory options. Ideal for both daily driving and occasional track use, these bushings contribute to a more engaging driving experience. For optimal performance, it is recommended to use Powerflex Copper Grease PCG1 during installation and to periodically reapply it to maintain a squeak-free operation.
MINI Cooper R50/R52/R53 Including S - Billet Lower Engine Mount - Performance offers a significant upgrade in engine mount performance, designed to enhance power transfer and vehicle handling. The Performance version combines the durability of Purple 80A and Black 95A materials, providing a 200% increase in stiffness over the original equipment (OE) mount. This upgrade is ideal for more extensively tuned MINI Coopers or those used in mild track conditions.