Twin Mass Flywheel B36 B38 Mini Engine

We Price Match - Give Us A Call or Chat!

T#:25938631

Part#: 21208600209

Ships in 7 Business Days

$ 991.99 USD

Add to Wish List

Qty

$ 991.99 USD

Add to Wish List

Upgrade your Mini's clutch system with this new dual-mass flywheel from Turner Motorsport to eliminate excessive clutch chatter and enhance shifting performance. Once installed, this flywheel reduces the effort needed when changing gears, providing a smoother driving experience. It's essential to replace the flywheel during clutch replacement if any wear is detected, as these systems cannot be resurfaced.

Eliminates excessive clutch chatter for smoother shifting
Reduces effort needed when changing gears
Enhances overall driving experience
Ensures optimal performance during clutch replacement
Provides a whole new shifting dimension to your Mini

Show More Show Less

DKM MRX Ceramic Twin-Disc Clutch Kit W/ Flywheel - 215mm - E60 E8X E9...

For vehicles with a production date up to 01/2009 with a 8 bolt flange

T#:5987852

Part#: MRX-006-075

Special Order: No Guaranteed ETA

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MRX Twin Ceramic Disc Clutch Kit is designed to hold up to 650 ft/lbs torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 215mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for upwards of 650 ft/lbs of torque **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

HD/Race Sprung 6 Pad

T#:14221780

Part#: BM13-HDG6

In Stock at Vendor

$ 1,607.00 USD

Add to Wish List

Qty

$ 1,607.00 USD

Add to Wish List

BM13-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

T#:26904952

Part#: XKBM23594-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Carbon Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

Clutch Slave Cylinder Repair Kit

T#:594725

Part#: 21521113875

In Stock at Vendor

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Stage 2 Single Disc Clutch And Flywheel Kit - Sprung Ceramic ...

T#:26904959

Part#: XKBM23552-1B

In Stock

$ 1,564.99 USD

Add to Wish List

Qty

$ 1,564.99 USD

Add to Wish List

The XClutch Stage 2 Single Disc Clutch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch carbon series is designed to offer the highest heat capacity and is designed specifically for high horsepower race cars where mass and inertia are critical. The carbon series is designed for motorsport use only. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Input Shaft Diameter - 1 9/64" Friction Surface Configuration - Raised Flywheel Step - -0.315 Assembly Weight Maximum Torque Capacity - 380 Recommended Use - Street/Track Use Includes Single Mass Flywheel Single Ceramic Clutch Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank

T#:26904953

Part#: XKBM23595-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Carbon Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

Stage 2 Drag/Drift Clutch Kit

T#:5095720

Part#: K70684-HD-B

Ships in 1 Business Day

$ 667.99 USD

Add to Wish List

Qty

$ 667.99 USD

Add to Wish List

SPEC Performance Clutch Kit With Billet Single Mass Flywheel - Stage ...

T#:42099841

Part#: SBB58A2STG5KT

Ships in 3 Business Days

$ 1,875.99

This product was last offered at the strikethrough price on
03-04-2026

$ 1,868.99 USD

Add to Wish List

Qty

$ 1,868.99 USD

Add to Wish List

This Clutch kit is rebuildable, offering long-term reliability for BMW owners pushing their vehicles to the extreme. For drivers seeking uncompromised power transfer and race-ready performance, the Stage 5 clutch kit is the ultimate choice.

Show More Show Less

OEM LuK Clutch Slave Cylinder - BMW E46 (Incl M3-non SMG), X3, Z4 and...

We Price Match - Give Us A Call or Chat!

T#:14155784

Part#: 21521164919

Back Ordered

$ 87.99 USD

Add to Wish List

Qty

$ 87.99 USD

Add to Wish List

This is a replacement clutch slave cylinder, made by a high quality OEM manufacturer. Replaces 21526785966 and 21526775922.

Lightweight Steel Flywheel (24lbs.) FW-635-SF

T#:23284092

Part#: FW635SF

Ships in 3 Business Days

$ 563.99 USD

Add to Wish List

Qty

$ 563.99 USD

Add to Wish List

Elevate your BMW's MINI Cooper S performance with this lightweight clutch master flywheel, weighing just 24 lbs.

Stage 1 21lbs Dual Mass Conversion Clutch Kit Pack for a 28 Spline 6 ...

T#:26305133

Part#: 03-654KS

Ships in 10 Business Days

$ 1,539.99 USD

Add to Wish List

Qty

$ 1,539.99 USD

Add to Wish List

Upgrade your Mini's clutch system with JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit, a superior alternative to the OEM dual mass flywheel and clutch kit. Engineered for durability and performance, this clutch and solid single mass flywheel replacement ensures reliable power transmission and smoother engagements. Benefits include:

Direct replacement for OEM dual mass flywheel and clutch kit.
Interchangeable with OEM clutch sets and components.
Steel surface can be refinished on the steel flywheel; friction area can be replaced on the aluminum flywheel.
Enhanced durability and reliability compared to OEM dual mass flywheel.
Absence of catastrophic failures common in dual mass flywheels.
Four times thicker friction surface area for better heat absorption and distribution.
Longer lifespan and reduced risk of glazing the clutch.
Suitable for street, track, and strip driving.

Features:

Clutches made with Clutchtex Kevlar and Miba Ceramics.
Extended life Ceramic clutch pad.
Includes clutch disc, clutch disc centering tool, pressure plate, release bearing, pressure plate bolts, and steel flywheel.
Kevlar clutch pads require break-in period; Ceramic pads fully mated in 10-20 miles.

JMTC recommends ordering an installation kit and a new master clutch cylinder for optimal performance and longevity of the clutch system.

Show More Show Less

Stage 2 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:25075808

Part#: K7052602HDOCE

Ships in 1 Business Day

$ 948.99 USD

Add to Wish List

Qty

$ 948.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 450lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

FACTORY FIT FX250 TWIN DISC

T#:21472868

Part#: 03240-HD0F-DLX

Ships in 3 Business Days

$ 2,158.99 USD

Add to Wish List

Qty

$ 2,158.99 USD

Add to Wish List

Factory like fitment and feel with enhanced power capacity! The Clutch Masters Factory Fit FX250 Series Twin Discs kit for the 2021+ BMW G80 M3 AND G82 M4 with the amazing S58 engine and a 6-Speed manual transmission was developed to bridge the gap between replacing the comfortable driving twin disc that came in these cars from the factory and one of the more race orientated 725, 850 or 1000 Series twin disc kits. As OE auto manufactures continue to push for more and more power, they are typically equipping those cars lucky enough to be outfitted with a manual transmission with a twin disc clutch. But what happens when the factory clutch starts to wear out or slip because you've modified and tuned the car? Lots of owners of these higher end powerful cars still want to maintain a car that is easy to drive on the street, yet still be able to reliably take the abuse they inevitably want to throw at it. Most aren't looking to go full race car and install a twin disc designed for such use, there has to be a compromise. The answer to these dilemmas is a Factory Fit FX Series Twin Disc Clutch Kits. Using components similar to what came in the car from the factory, the CM engineering team does everything they can to expand and improve upon the OE twin disc in many ways. Using higher end friction materials, lighter materials and expertise in developing performance clutch kits for over 45 years, CM has dialed in a twin disc kit that bridges the gap between full race car and luxury daily driver making serious horsepower. In the case of the BMW G8X twin disc, we have done away with the factory self-adjusting cover, a little over 10lbs of weight reduction in the entire assembly, and we have gone from an 8.5" clutch disc to a 9.5" disc for significantly more disc surface area. The Clutch Masters FX Series Twin Disc kits utilize proven friction materials found in the FX Series Single Disc Clutch kits and are available in several different configurations to suit you and your cars needs. The Factory Fit FX250 Series Twin disc will come as a complete replacement kit utilizing a lightweight aluminum Type 3 hard anodized flywheel, steel floater, factory style stamped steel cover, two DLX clutch discs utilizing a combination of Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc, throw out bearing, and clutch fork. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar disc without compromising the street friendly characteristics ** It is highly recommended to eliminate the factory clutch delay valve. Not only will removing this piece improve the cars ability to shift quicker more efficiently, it will also help improve the lifespan of your new clutch **

Show More Show Less

Clutch Kit Inc Chromoly Flywheel; 8" Twin Sprung Ceramic Clutch Discs...

T#:26771689

Part#: XKMC20520-2E

Ships in 2 Business Days

$ 1,796.99 USD

Add to Wish List

Qty

$ 1,796.99 USD

Add to Wish List

9" Twin Disc Clutch Kit - Solid Carbon Blade Discs

T#:17804816

Part#: XKBM23596-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch carbon series is designed to offer the highest heat capacity and is designed specifically for high horsepower race cars where mass and inertia are critical. The carbon series is designed for motorsport use only. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Carbon Blade Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 1230 Recommended Use - Motorsports only Includes Single Mass Flywheel 2 Solid Carbon Blade Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

Stage 2 Drag Clutch Kit

T#:25075810

Part#: K70526-02-HD-DXD

Ships in 1 Business Day

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Drag Clutch Kits: Recommended for use on the track with an emphasis on Drag racing. Rated to hold 520lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

E46 330i SPEC Stage 4 Racing Clutch Kit

T#:350722

Part#: SB034

Ships in 7 Business Days

Starting at $ 2,235.23 USD

Add to Wish List

Starting at $ 2,235.23 USD

Add to Wish List

HD/Race Sprung 4 Pad

T#:14221779

Part#: BM13-HDG4

In Stock at Vendor

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

BM13-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

Clutch Kit - Stage 1 Single Sprung Organic Clutch Disc

T#:26771740

Part#: XKMC20002-1A

Ships in 2 Business Days

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

HD/Perf Street Sprung

T#:14221789

Part#: BM13-HDSS

Ships in 2 Business Days

$ 1,588.00 USD

Add to Wish List

Qty

$ 1,588.00 USD

Add to Wish List

This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

Show More Show Less

Pilot Bearing BMW/Porsche

T#:54388433

Part#: PB1002

In Stock at Vendor

$ 8.00 USD

Add to Wish List

Qty

$ 8.00 USD

Add to Wish List

Stage 3 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:366990

Part#: K03099SSTZ

Ships in 1 Business Day

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar friction material is used for its unique static to dynamic ratios of friction co-efficients at high energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. This kit uses the same Race Engineered SFI approved pressure plate as stage 3 daily package. Race engineered pressure plates deliver more transmittable torque and stability, longer life and superior thermal resistance. They also deliver noticeably better dynamics through higher clamp load when driving the vehicle to its limits. Stage 3 Endurance Clutch Kits: Recommend usages are Rally, endurance race, clubsport, autocross, street and daily Conservatively rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 4

T#:41931273

Part#: SB53A2STG4KT

Ships in 3 Business Days

$ 1,555.99 USD

Add to Wish List

Qty

$ 1,555.99 USD

Add to Wish List

The SPEC Stage 4 Clutch Kit With Billet Single Mass Flywheel is the ultimate upgrade for BMW enthusiasts demanding race-spec performance and bulletproof strength in the most demanding driving conditions.

Show More Show Less

OS Giken Throw Out Bearing Only For OS Giken Clutch Kit

T#:54388400

Part#: MN023-AJ60K

Ships in 5 Business Days

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

Throw out bearing for OS Giken clutches

HD/Race Sprung 4 Pad

T#:14221778

Part#: BM12-HDG4

Ships in 6 Business Days

$ 1,559.00 USD

Add to Wish List

Qty

$ 1,559.00 USD

Add to Wish List

BM12-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

Flywheel

We Price Match - Give Us A Call or Chat!

T#:591307

Part#: 11227535599

In Stock at Vendor

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

MINI R56 Stage 3+ Spec Clutch Kit

T#:27938435

Part#: SB003F-2

Ships in 3 Business Days

$ 899.00 USD

Add to Wish List

Qty

$ 899.00 USD

Add to Wish List

Upgrade your Mini with the MINI R56 Stage 3+ Spec Clutch Kit. This high-performance clutch kit is designed to handle the increased power and torque of your Mini, providing improved performance and durability.

Engineered for high-performance applications
Handles increased power and torque levels
Improved clutch engagement and pedal feel
Enhanced durability for long-lasting performance

Show More Show Less

BMW E39 M5 Stage 3 Daily Clutch Kit

For Model Years 2000-2003

T#:377811

Part#: K70282SSO

Ships in 1 Business Day

$ 1,104.99 USD

Add to Wish List

Qty

$ 1,104.99 USD

Add to Wish List

BMW E39 M5 Stage 3 Daily Clutch Kit is the ultimate upgrade for your BMW E39 M5, offering enhanced performance and durability for daily driving. This high-performance clutch kit is engineered to handle increased power and torque, providing a smooth and responsive driving experience. Designed specifically for the BMW E39 M5, it ensures a perfect fit and seamless integration with your vehicle's transmission system.

Upgrading to the Stage 3 Daily Clutch Kit is ideal for drivers seeking improved clutch engagement and longevity without sacrificing comfort. This kit is built to withstand the demands of both spirited driving and everyday use, making it the perfect choice for BMW enthusiasts.

Enhanced performance and durability for daily driving
Smooth and responsive clutch engagement
Handles increased power and torque
Perfect fit and seamless integration with BMW E39 M5
Built to withstand demands of spirited and everyday driving

Show More Show Less

8" Twin Disc Clutch And Flywheel Kit - Twin Solid Ceramic Discs ...

T#:26771698

Part#: XKBM20524-2E

Ships in 2 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

The XClutch 8" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Ceramic Clutch Disc 1 Solid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

HD/Perf Street Sprung

T#:14221794

Part#: BM17-HDSS

In Stock at Vendor

$ 855.00 USD

Add to Wish List

Qty

$ 855.00 USD

Add to Wish List

BM17-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.

Show More Show Less

Clutch Kit Inc Chromoly Flywheel; Stage 2R Ceramic Race Disc ...

T#:26738405

Part#: XKMC22591-1R

Ships in 2 Business Days

$ 1,509.99 USD

Add to Wish List

Qty

$ 1,509.99 USD

Add to Wish List

Stage 1 Single Sprung Organic Clutch Disc

T#:26738392

Part#: XKMC23540-1A

Ships in 2 Business Days

$ 1,989.99 USD

Add to Wish List

Qty

$ 1,989.99 USD

Add to Wish List

Stage 3 21lbs Dual Mass Conversion Clutch 28 Spline 6 Speed

T#:22756696

Part#: 03-654RKS

Ships in 10 Business Days

$ 1,758.99 USD

Add to Wish List

Qty

$ 1,758.99 USD

Add to Wish List

JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit

JMTC presents the ultimate solution for your MINI Cooper S - the Solid Flywheel Conversion Clutch Kit, a direct replacement for the OEM dual mass flywheel and clutch kit. This comprehensive kit includes a solid single mass flywheel and clutch, replacing the entire OEM Dual-Mass Flywheel and clutch set while maintaining compatibility with other OEM components. Here's why you should consider upgrading to a single mass clutch:

Key Benefits:

Dual mass flywheels are designed to reduce engine vibration but are sensitive to abuse and power increases.
Dual mass flywheels are prone to premature failure and glazing, leaving you stranded.
JMTC's flywheel offers robust reliability with a traditional single mass friction surface, four times thicker than dual mass flywheels.
It's suitable for all driving conditions, featuring superior heat absorption and resurfacing capability.
Made in America using Clutchtex Kevlar and Miba Ceramics for extended life.
Choose between Valeo or Kevlar clutch disc for exceptional performance.
The clutch kit includes essential components, ensuring a complete and reliable installation.
We recommend an installation kit and a new master clutch cylinder for optimal performance and longevity.

JMTC's Solid Flywheel Conversion Clutch Kit is your ticket to peace of mind. It's street, track, and strip-ready, so why wait? Elevate your MINI's performance today!

Show More Show Less

9" Twin Disc Clutch Kit - Solid Ceramic Discs

T#:26904963

Part#: XKBM23545-2E

Ships in 2 Business Days

$ 1,924.99 USD

Add to Wish List

Qty

$ 1,924.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The twin disc 9" range with ceramic friction discs are designed for high horsepower motorsport applications where a high heat and torque capacity is required. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.055" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - -0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Track Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Pilot Bearing Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

BMW E39 M5 Stage 2 Endurance Clutch Kit

T#:28138144

Part#: K70282HDOFEKT

Ships in 1 Business Day

$ 644.99 USD

Add to Wish List

Qty

$ 644.99 USD

Add to Wish List

Stage 2 Daily Clutch Kit

T#:5095712

Part#: K70473-HD-O

Ships in 1 Business Day

$ 725.99 USD

Add to Wish List

Qty

$ 725.99 USD

Add to Wish List

BMW Aluminum Bolt

T#:46478545

Part#: 23000417164S

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

This is a single-use bolt and should be replaced every time it’s removed. Don’t let a major repair come to a halt because you’re missing the proper hardware.

Stage 2 Daily Clutch Kit

T#:5095704

Part#: K70472-HD-O

Ships in 1 Business Day

$ 637.99 USD

Add to Wish List

Qty

$ 637.99 USD

Add to Wish List

OEM LuK Manual Transmission Clutch Kit - BMW F22/23 F3X RWD N20 B46 2...

T#:41965062

Part#: 03-110

Ships in 7 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

If your clutch is worn out or fried, this replacement OEM LuK clutch kit may be just the solution to get your BMW back on the road.

South Bend Clutch Stage 4 X-Series Clutch Kit

For Vehicles with production date from 2007

T#:14585013

Part#: K70526-02-SS-X-S

Ships in 1 Business Day

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Show More Show Less

MINI R Chassis Stage 4 S Clutch Kit - FX400 03635-HDC6-SK

T#:30164613

Part#: 03635HDC6SK

Ships in 3 Business Days

$ 1,321.99 USD

Add to Wish List

Qty

$ 1,321.99 USD

Add to Wish List

Upgrade your Mini with the MINI R Chassis Stage 4 S Clutch Kit - FX400 03635-HDC6-SK, designed for enthusiasts seeking enhanced performance and durability. This high-performance clutch kit offers superior handling of increased torque and horsepower, making it ideal for both street and track use. Engineered with advanced friction materials, it provides exceptional durability and heat resistance under extreme conditions. The Stage 4 S Clutch Kit ensures precise engagement and improved pedal feel, delivering a responsive driving experience that meets the demands of aggressive driving styles.

Designed for increased torque and horsepower
Superior handling and durability
Advanced friction materials for heat resistance
Precise engagement and improved pedal feel
Ideal for street and track enthusiasts

Enhance your Mini's performance with the Stage 4 S Clutch Kit for reliable and responsive driving.

Show More Show Less

Clutch Kit Inc Chromoly Flywheel; Stage 2 Sprung Ceramic Clutch Disc ...

T#:26738402

Part#: XKMC22591-1B

Ships in 2 Business Days

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

8 In. Twin Solid Ceramic Disc Clutch And Flywheel Kit

T#:24776633

Part#: XKBM20530-2B

Ships in 2 Business Days

$ 1,886.99 USD

Add to Wish List

Qty

$ 1,886.99 USD

Add to Wish List

The XClutch 8" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +2.2mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

MINI R50 Stage 4 MINI Cooper Clutch Kit - FX400 03052-HDC6

T#:31423693

Part#: 03052HDC6

Ships in 3 Business Days

$ 581.99 USD

Add to Wish List

Qty

$ 581.99 USD

Add to Wish List

OEM LuK Clutch Release/Throw-Out Bearing -- E30 E36 E34

We Price Match - Give Us A Call or Chat!

T#:374620

Part#: 21512226729

Ships in 7 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Located between the clutch fork and pressure plate fingers, these bearing may become damaged over time. Always recommended to replace whenever the clutch system needs serviced.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

South Bend - Stage 2 Endurance Clutch Kit

T#:28337862

Part#: K03059HDTZ

Ships in 1 Business Day

$ 932.99 USD

Add to Wish List

Qty

$ 932.99 USD

Add to Wish List

Upgrade to South Bend Clutch's Stage 2 Endurance Clutch Kit for your e85 Z4! Input Shaft Spline Count: 22 Input Shaft Diameter: 1.13” Disc Diameter: 9.44" Disc Material: Kevlar Disc Style: Full-Face Hub Style: Sprung Pressure Plate Style: Diaphragm Throwout Bearing Included: Yes Alignment Tool Included: Yes Pilot Bushing Included: Yes Flywheel Included: No

Show More Show Less

Stage 3 Performance Ceramic Clutch Kit - With Single Mass Flywheel ...

T#:6366589

Part#: MC-030-050

Special Order: No Guaranteed ETA

$ 1,119.99 USD

Add to Wish List

Qty

$ 1,119.99 USD

Add to Wish List

9 In. Twin Solid Ceramic Clutch And Flywheel Kit

T#:24809862

Part#: XKBM23589-2P

Ships in 2 Business Days

$ 3,112.99 USD

Add to Wish List

Qty

$ 3,112.99 USD

Add to Wish List

The XClutch 9" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.055" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +3.8mm Maximum Torque Capacity - 1350 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9" Twin Disc Clutch Kit - Solid Ceramic Discs

T#:17804818

Part#: XKBM23596-2E

Ships in 10 Business Days

$ 2,239.99 USD

Add to Wish List

Qty

$ 2,239.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The twin disc 9" with ceramic friction discs are designed for high horsepower motorsport applications where a high heat and torque capacity is required. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Clutch Kits & Parts

Sub-Categories

JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit

Key Benefits:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results