Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
Ships in 4 Business Days
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less
OEM Valeo Alternator - 180amp - E9X M3 S65
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377508
Part#: 12317837981
In Stock
$ 630.99

This product was last offered at the strikethrough price on
05-07-2026

$ 404.99 USD
Free Shipping
$ 404.99 USD
Free Shipping
This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!
OEM Starter Motor - E46 M3 2001-2006
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:2988
Part#: 12417835735
In Stock
$ 400.99

This product was last offered at the strikethrough price on
05-07-2026

$ 293.99 USD
Free Shipping
$ 293.99 USD
Free Shipping
This is the starter motor for BMW E46 M3 2001-2006 is an OEM Valeo unit.

This item fits the following BMWs:
2001-2006 E46 BMW M3. M3 Convertible
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2005-2008 E85 BMW Z4 M Roadster Z4 M Coupe
Show More Show Less

Fuel-It! - Corporate Logo
T#:589404
Part#: N54-PORTINJCONMO
Ships in 2 Business Days
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.
Show More Show Less

Valeo Voltage Regulator - Valeo - E53, E60, E63, E64, E70
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:1196078
Part#: 12318510090
Ships in 2 Business Days
$ 91.37 USD
Free Shipping on orders $49 and up
$ 91.37 USD
Free Shipping on orders $49 and up
OEM replacement for you BMW alternator fixing charging issues
E46 M3, MZ3 S54 OEM Valeo Alternator (New)
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377735
Part#: 12317831436
In Stock
$ 522.00

This product was last offered at the strikethrough price on
07-16-2026

$ 463.99 USD
Free Shipping
$ 463.99 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies.

Show More Show Less

Rally Road - Corporate Logo
T#:28570819
Part#: B047-KIT
Ships on Aug 14, 2026
$ 209.99 USD
Free Shipping on orders $49 and up
Fuel-It! - Corporate Logo
T#:2810078
Part#: B58PUMPHARNESS
In Stock
$ 45.00 USD
Free Shipping on orders $49 and up
Use this harness to run an improved "Supra" fuel pump in your B58 car. This harness allows you to run the G20 M340i/Supra Fuel pump (13518631642) on your F Chassis B58 car.

Fuel-It! - Corporate Logo
T#:26038558
Part#: BMW-N54-PRM-950
In Stock
$ 1,088.00 USD
$ 1,088.00 USD

Voltage Regulator
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:594108
Part#: 12317603775
Ships in 2 Business Days
$ 71.22

This product was last offered at the strikethrough price on
05-04-2026

$ 70.45 USD
Free Shipping on orders $49 and up
$ 70.45 USD
Free Shipping on orders $49 and up
Have you noticed inconsistent electrical power in your interior lately? Your voltage regulator is responsible for maintaining a constant voltage out from the alternator.
OEM Valeo Alternator - E60 M5, E63/64 M6
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:14835
Part#: 12317836592
Ships in 7 Business Days
$ 358.99 USD
Free Shipping
$ 358.99 USD
Free Shipping

This is a Valeo brand new 170 amp alternator. These alternators are built especially for extremes of heat, cold and high demand. Your BMW deserves nothing less than the best, which is why an OEM alternator is the best option. BMW alternators are built to last using the highest quality materials and the most technologically advanced processes. All alternator parts are 100% factory tested to assure that they meet or exceed original equipment specifications. And every alternator is fully load tested to guarantee compliance with BMW's strict performance specifications.

No core charge!

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6

Show More Show Less
Alternator - 150 Amp - Valeo
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:579634
Part#: 439590
In Stock
$ 620.35

This product was last offered at the strikethrough price on
05-03-2026

$ 518.99 USD
Limited Qty Sale
Free Shipping
$ 620.35

This product was last offered at the strikethrough price on
05-03-2026

$ 518.99 USD
Limited Qty Sale
Free Shipping


Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 2 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.
Valeo New Alternator - 80 Amp - E34, E36
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377737
Part#: 12311744564
In Stock at Vendor
$ 549.99

This product was last offered at the strikethrough price on
05-07-2026

$ 533.99 USD
Free Shipping
$ 533.99 USD
Free Shipping
Brand new unit with no core charge
Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less

Fuel-It! - Corporate Logo
T#:17106920
Part#: BMW-B58HPFP-A01
Ships on Aug 10, 2026
$ 1,499.00 USD
Free Shipping on orders $49 and up
$ 1,499.00 USD
Free Shipping on orders $49 and up
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less

Fuel-It! - Corporate Logo
T#:403279
Part#: FILPFPK3
Ships in 1-2 days
Starting at $ 1,154.83 USD
Free Shipping on orders $49 and up
Starting at $ 1,154.83 USD
Free Shipping on orders $49 and up
This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping
Show More Show Less
Fuel-It! - Corporate Logo
T#:8061332
Part#: S58FLEXFKIT
Ships on Aug 10, 2026
$ 479.00 USD
Free Shipping on orders $49 and up
This complete flex fuel kit installs in under 30 minutes and reads your exact E85 mixture in the Fuel-It! smartphone app or JB4 app if equipped. Features CNC machined fittings for a quick plug and play installation with nylon sleeved stainless steel braided fuel lines for life long leak free operation. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Supports stand-alone Bluetooth operation with the Fuel-It! app **For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI page option 2/3/4 input to enable.
Show More Show Less

OEM Valeo Alternator - 185 amp
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:376244
Part#: 12317525376
Ships in 2 Business Days
$ 730.23

This product was last offered at the strikethrough price on
07-16-2026

$ 647.45 USD
Free Shipping
$ 647.45 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

Show More Show Less
Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Starting at $ 199.99 USD
Free Shipping

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

Fuel-It! - Corporate Logo
T#:21275562
Part#: FFK-S55-STO
Ships on Aug 10, 2026
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

BMW F8X S55 Flex Fuel Kit | Fuel-It! from Turner Motorsport is essential for those running E85 or ethanol blends in their BMW. This comprehensive kit offers a plug-and-play solution for installing a Bluetooth ethanol sensor in your S55-powered vehicle.

  • Complete Upgrade: Replaces stock fuel lines with -6an E85-compatible lines from the fuel tank to the engine bay.
  • Advanced Monitoring: Includes an ethanol sensor and Bluetooth analyzer for real-time ethanol content monitoring.
  • Versatile Compatibility: Supports both Bluetooth App and 5v analog output for integration with JB4 or flash tuning.
  • Custom Fitment: Options available for stock HPFP setups, port injection kits, or non-Fuel-It! port injection systems.
  • High-Quality Components: Features BMS custom billet aluminum fittings for a seamless integration without modifications.
  • Off-Road Use Only: Designed for off-road applications, ensuring high performance for enthusiasts.
Show More Show Less

Fuel-It! - Corporate Logo
T#:17837993
Part#: B58STG3LPFP
Back Ordered
$ 829.99 USD
Free Shipping on orders $49 and up
This is a complete Low Pressure Fuel Pump (LPFP) upgrade for those customers that need the additional capacity to meet their power goals on pump gas, race gas, or E85. It utilizes a stock pump for the primary pump so that your EKP operates as intended by the factory eliminating potential errors for current draw and the secondary pump then runs under high boost only. For power levels up to 700whp we'd recommend using the standard 450 pump and beyond 700whp we'd recommend upgrading to the 525 pump. F-Series B58 (Gen 1) Stage 3 assemblies include: New stock LPFP Secondary pump assembly Secondary wiring harness Walbro filter Walbro 450 pump (F90000274) Compatible with the following vehicle production dates: 1' F20 LCI   (05/2014 — 06/2019) 1' F21 LCI   (05/2014 — 06/2019) 2' F22   (06/2014 — 06/2017) 2' F22 LCI   (09/2016 — 12/2019) 2' F23   (06/2014 — 06/2017) 2' F23 LCI   (09/2016 — 12/2019) 3' F30 LCI   (09/2014 — 10/2018) 3' F31 LCI   (09/2014 — 06/2019) 3' F34 GT LCI   (09/2015 — 12/2019) 4' F32   (04/2015 — 02/2017) 4' F32 LCI   (05/2016 — 12/2019) 4' F33   (03/2015 — 02/2017) 4' F33 LCI   (05/2016 — 12/2019) 4' F36 Gran Coupé   (05/2014 — 03/2017) 4' F36 Gran Coupé LCI  (05/2016 — 12/2019) *Note: Secondary pump can NOT run full time. We recommend using a Hobb's switch to trigger the secondary under high boost. See the installation process here: https://www.youtube.com/watch?v=YoPf0F7PBt8
Show More Show Less
Valeo Brand New Alternator - E89 Z4 M Coupe/Roadster
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:379218
Part#: 12317837691KT
Ships in 6 Business Days
$ 378.99 USD
Free Shipping
$ 378.99 USD
Free Shipping

This is a brand new Valeo alternator. BMW Alternators are built especially for extremes of heat, cold and high demand. Your BMW deserves nothing less than the best, which is why an OEM Valeo alternator is the best option. BMW alternators are built to last using the highest quality materials and the most technologically advanced processes. All alternator parts are 100% factory tested to assure that they meet or exceed original equipment specifications. And every alternator is fully load tested to guarantee compliance with BMW's strict performance specifications. 

No core charge!

Fits the following BMW Chassis:

E89 BMW Z4 M Coupe, M Roadster

Show More Show Less
Fuel-It! - Corporate Logo
T#:15976528
Part#: S58X3MFFK-BTECA
Ships in 3 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
This is a complete plug-and-play kit to install a Bluetooth ethanol sensor in your X3M or X4M in about 30 minutes. The kit includes the following: New 5/16" E85 compatible fuel lines for your engine bay Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer (view E85 mix via Fuel-It! app) OR CANflex ECA (no Fuel-It! app support without the Bluetooth ECA), view E85 mix via JB4 or flash logging) Plug-and-play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tunin This kit is compatible with the following 2020+ BMW X3M / X3M Competition 2020+ BMW X4M / X4M Competition *For the BMW S58 JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI page option 2/3 input to enable. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less


Fuel-It! - Corporate Logo
T#:21275565
Part#: FFK-S55
Ships on Aug 7, 2026
Starting at $ 549.99 USD
Free Shipping on orders $49 and up
Starting at $ 549.99 USD
Free Shipping on orders $49 and up
If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403282
Part#: BMW-S2LPFP-E6X
Ships on Aug 10, 2026
$ 810.00 USD
Free Shipping
$ 810.00 USD
Free Shipping

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in:
    • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.
  • New Build:
    • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

Both options include the following:

  • A complete plug and play solution by simply replacing your stock bucket
  • A new E85 compatible Walbro 450 pump
  • A new Walbro filter
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Flow testing prior to shipping
  • Recommended accessories:
    • Lock Ring Removal Tool 

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

 

- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

Show More Show Less
Hitachi - Corporate Logo
T#:48850064
Part#: 12311747920
Ships in 7 Business Days
New Item
$ 37.99 USD
Free Shipping on orders $49 and up
$ 37.99 USD
Free Shipping on orders $49 and up
This voltage regulator is a crucial component that controls the alternator's output, preventing overcharging by adjusting the current to maintain a safe range of vehicle voltage, thereby protecting the battery and electrical system. Symptoms of failure include dim lights, battery warnings, or a dead battery, often requiring replacement, which can be internal or external to the alternator.
Show More Show Less

Alternator
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:594101
Part#: 12318570672
In Stock at Vendor
$ 1,094.99

This product was last offered at the strikethrough price on
05-07-2026

$ 1,062.99 USD
Free Shipping on orders $49 and up
$ 1,062.99 USD
Free Shipping on orders $49 and up
Replacement Alternator from Valeo

Valeo - Corporate Logo
T#:594588
Part#: 12417616502
Ships in 4 Business Days
$ 265.76 USD
Free Shipping
$ 265.76 USD
Free Shipping
Brand new unit - no core charge! Avoid messing with a core return entirely!
Rally Road - Corporate Logo
T#:13694125
Part#: BMWE36FPIS
Ships on Aug 7, 2026
$ 45.99 USD
Free Shipping on orders $49 and up
This adapter sleeve and clamp from Rally Road simplify the installation of an Aeromotive or Walbro fuel pump into the factory fuel pump housing and carrier.

Rally Road - Corporate Logo
T#:401463
Part#: B015-8BL
Ships on Aug 10, 2026
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping
Rally Road - Corporate Logo
T#:13463755
Part#: TURBOFL
Ships on Aug 10, 2026
$ 26.99 USD
Free Shipping on orders $49 and up
Rally Road has created the perfect turbo oil feed line specifically made for the M50 series motor with top mount turbo manifold. This line is braided stainless steel on the outside and Teflon on the inside for maximum rigidity .
Show More Show Less

Rally Road - Corporate Logo
T#:401511
Part#: RROCCK
Ships on Aug 7, 2026
Starting at $ 243.99 USD
Free Shipping
Starting at $ 243.99 USD
Free Shipping

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

This oil cooler system is race tested and proven to outflow the euro M3 oil filter housing. Additionally, this particular system uses a sealing mechanism to direct the oil flow through the cooler lines and then through the oil filter.  Other cooler caps do not provide this seal and therefore the external oil coolers and lines act as a "balloon".  The lines and cooler are pressurized, but oil does not flow through them.  Flowing oil means it is being cooled and not just acting as an external reservoir.

Flow testing reveals that the oil cooler cap will outflow the Euro M3 Oil Filter Housing by more than 80% at the same, pressure, RPM, and oil temperature. In the upper RPM range, there is nearly a 100% improvement in flow from the RallyRoad oil cooler cap when compared to the Euro M3 oil filter housing.  This is a massive improvement over OE and is a worthwhile upgrade, especially in engines that see severe duty.

Features:

  • -8AN o-ring ports to provide a leak free fitting without the use of Teflon tape or sealant used by other oil cooler caps.
  • Viton o-rings are used throughout to maintain function and sealing in a high-temperature oil environment.
  • Use of the stock filter cap bolt to reduce cost and simplify installation.
  • An internal sealing mechanism to direct oil flow through the oil cooler and through the filter.
  • 1/8" NPT side port for external oil pressure gauge.

Kit Includes:

  • Oil filter cap with fittings
  • Oil filter sealing ring
  • BMW MANN Oil Filter and gasket

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less

Rally Road - Corporate Logo
T#:401525
Part#: RRE36FPS
Ships on Aug 7, 2026
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Starting at $ 46.99 USD
Free Shipping on orders $49 and up

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

Anyone that has approached the subject of substituting a higher volume fuel pump knows that fitting said pump into a stock housing can be a hassle. What's more is that certain methods can lead to less than safe or reliable results. Enter the Rally Road fuel pump adapter sleeve. This simple adapter makes the installation of a Walbro or Aeromotive fuel pump into the factory sending unit safe, secure and completely functional. The pump rests on a ledge at the bottom of the sleeve and is held tightly in the bracket by a mil-spec stainless steel clamp. A well thought, quality built solution to a common retrofit problem. 

Fits Walbro 450lph high volume fuel pumps.

This kit includes:

  • Anodized fuel pump sleeve
  • Stainless steel mil-spec hose clamp

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less
Rally Road - Corporate Logo
T#:13463756
Part#: VANOSBOSF1
Ships on Aug 17, 2026
$ 27.99 USD
Free Shipping on orders $49 and up
The easiest way to supply your turbo or supercharger with oil!
Rally Road - Corporate Logo
T#:13694124
Part#: BMWE46FPIS
Ships on Aug 13, 2026
$ 45.99 USD
Free Shipping on orders $49 and up
Simplifies Fuel pump installation.


Valeo New Alternator - 230 Amp - E71, F01, F02
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:579635
Part#: 439640
Ships on Aug 17, 2026
$ 590.99 USD
Free Shipping
$ 590.99 USD
Free Shipping
New Replacement Alternator From Valeo - 12317603781
OEM Valeo New Alternator - 230amp
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:383432
Part#: 12317603782
Ships on Aug 17, 2026
$ 730.99 USD
Free Shipping
$ 730.99 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

Show More Show Less
Rally Road - Corporate Logo
T#:1196153
Part#: B046-KIT
Special Order: No Guaranteed ETA
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
This single pump is one of the highest flowing around

Fuel-It! - Corporate Logo
T#:403273
Part#: FILPFPK2
Back Ordered
Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
Sale - Save 2%
$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping
Show More Show Less

Hitachi - Corporate Logo
T#:589968
Part#: 11327601233
Back Ordered
$ 55.00 USD
Free Shipping on orders $49 and up
$ 55.00 USD
Free Shipping on orders $49 and up
A faulty camshaft follower can damage the engine and cause incorrect valve timing.
Valeo - Corporate Logo
T#:371896
Part#: 12317501599
In Stock
$ 323.99 USD
Free Shipping
$ 323.99 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

Show More Show Less

Fuel-It! - Corporate Logo
T#:403295
Part#: FILPFPK5
Back Ordered
Sale - Save 2% $ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
Sale - Save 2%
$ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your weak stock LPFP assembly with a high-flow E85-certified one. Standard Kit Includes: A brand new OEM LPFP bucket that is upgraded with a new Walbro 450 or 525 pump and filter. A new E85 compatible Walbro 450 pump (F90000274) that flows 50% more fuel than stock Optional A new E85 compatible Walbro 525 pump (F90000285) that flows 65% more fuel than stock NOTE: Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible. Have the system checked by your BMW center as soon as possible." As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored. If you have any questions about this please feel free to contact us. Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced. If this is a concern for you check out our Stage 3 fuel pump upgrade kits that retain the stock LPFP and add a secondary pump.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403475
Part#: E89S2LPFP
Back Ordered
Starting at $ 820.00 USD
Free Shipping
Starting at $ 820.00 USD
Free Shipping

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in:
    • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.
  • New Build:
    • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

Both options include the following:

  • A complete plug and play solution by simply replacing your stock bucket
  • A new E85 compatible Walbro 450 pump
  • A new Walbro filter
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Flow testing prior to shipping
  • Recommended accessories:
    • Lock Ring Removal Tool 

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

Show More Show Less

OEM Valeo Alternator - E60 E63 E65 550i 650i 750i
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:379446
Part#: 12317542935KT
Back Ordered
$ 444.99 USD
Free Shipping
$ 444.99 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

For vehicles with production date from 03/2005.

Show More Show Less

Valeo Alternator - 180 Amp - E70
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377914
Part#: 12317561004
Ships in 6 Business Days
$ 482.99 USD
Free Shipping
$ 482.99 USD
Free Shipping
Brand new unit with no core charge.
OEM Valeo Starter (New)
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:380773
Part#: 12417835737
Back Ordered
$ 593.99 USD
Free Shipping
$ 593.99 USD
Free Shipping
A failed starter will leave even the best-maintained BMW stranded. Replace your failed starter motor with this brand new replacement from Valeo. Valeo is an OEM BMW supplier - save money and by quality parts by buying them in a different  box!                          
Show More Show Less
Fuel-It! - Corporate Logo
T#:25075820
Part#: BX8LPFPS2LRRT
Back Ordered
$ 619.00 USD
Free Shipping on orders $49 and up
Finally, a quality low-pressure fuel system upgrade worthy of installing in your B58-equipped G-Chassis BMW! This drop-in bucket assembly replaces the factory fuel-sending unit, supports ethanol fuel and up to 700 wheel horsepower!
Show More Show Less


Fuel-It! - Corporate Logo
T#:18202901
Part#: FIS65M3LPFP
Back Ordered
$ 514.00 USD
Free Shipping on orders $49 and up
As these cars get older we're seeing more issues with the stock components and more demand for cost-conscious fueling solutions. The new Fuel-It 650HP line of fuel system upgrades are designed with those needs in mind while maintaining a budget. They make the most of the stock components to maintain stock reliability and drive-ability but when the boost gets cranked up, the Fuel-it 650HP components kick in to support the additional fueling needs of your high horsepower car. With the Fuel-It 650HP lineup, you can upgrade your components all at one time or upgrade them as time and budget allows. If upgrading one component at a time, we'd recommend starting with the LPFP first as that is the heart of your fuel system, without a good Low Pressure Fuel pump (LPFP) you can't supply the fuel needed to any of your other components. Your secondary pump can NOT run full time, it must only be run under boost only. Running it full time will place additional strain on the stock system, will lead to high fuel temps, and pump or component failure. To turn the secondary pump on under boost we recommend running the included 4psi Hobb's switch. Included with all S65 LPFP upgrades: Walbro 450 pump (F90000274) Black Anodized Custom fitting Pump brackets 9/64" terminals and associated hardware Fuel line Replacement PITA clip Wiring harness
Show More Show Less
Fuel-It! - Corporate Logo
T#:21242695
Part#: FFK-N5XA
In Stock
Starting at $ 485.99 USD
Free Shipping on orders $49 and up
Starting at $ 485.99 USD
Free Shipping on orders $49 and up
If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Chassis BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less