Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Ina - Corporate Logo
T#:2045
Part#: 11281748131
In Stock
$ 20.25 USD
Free Shipping on orders $49 and up
$ 20.25 USD
Free Shipping on orders $49 and up

This is an OEM INA tensioner pulley, also known as the adjusting pulley and lower pulley. This pulley is mounted on the belt tensioner near the center of the belt assembly. The upper and lower pulleys are known to be the primary sources for 'belt squealing'. This pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

This pulley is mounted along with the hydraulic belt tensioner but can be replaced on its own. It is used for the main drive belt on the M50-M54 family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines). This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time. If you have a mechanical belt tensioner, the pulley can only be replaced with a new tensioner.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

If you need the hydraulic belt tensioner, click here.

This item is 70mm Diameter. Please check the diameter before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i - Only for Hydraulic Tensioner
1999-2000 E46 323i, 323Ci, 328i, 328Ci - Only for Hydraulic Tensioner
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi - Only for Hydraulic Tensioner
2001-2006 E46 M3 coupe & convertible - Only for Hydraulic Tensioner
2000-2006 X5 3.0 liter (E53 chassis)
2004 E60 525i, 530i (M54 engine)
1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

Show More Show Less
CTS - Corporate Logo
T#:5001916
Part#: CTS-IGN-008
Ships in 8 Business Days
Sale - Save 17% $ 27.99

This product was last offered at the strikethrough price on
09-29-2026

$ 23.37 USD
Free Shipping
Sale - Save 17%
$ 27.99

This product was last offered at the strikethrough price on
09-29-2026

$ 23.37 USD
Free Shipping
CTS Turbo is proud to announce its high-performance replacement ignition coil packs for the BMW vehicles. These are the perfect replacement or upgrade to your N20, N26, N52, N54, N55, N63, S63, S55, M52, M54, S54 engine to keep it running at its peak performance. Also compatible with R5x Mini Cooper vehicles.
Show More Show Less
Corteco - Corporate Logo
T#:2157
Part#: 11812283798
In Stock
$ 82.69

This product was last offered at the strikethrough price on
06-23-2026

$ 82.00 USD
Free Shipping
$ 82.00 USD
Free Shipping
Don't neglect your motor mounts! The stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to shift. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

This is a replacement stock motor mount used on all M3s since 1995 and the Z4 M. It's also the standard motor mount for Z3 and E46 325xi/330xi models (left side). It can also used as an upgrade for non-M 1992-2006 E36 and E46 6 cylinder models because it's slightly stiffer to reduce flex and for a longer lifespan.

Sold per mount.

This motor mount / engine mount fits the following BMWs:
1995-1999 E36 BMW M3
2001-2005 E46 BMW 325xi 330xi (for left side only)
2001-2006 E46 BMW M3
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

In addition, this can be used as a motor mount upgrade for these models:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
Show More Show Less

OEM INA Accessory Belt Tensioner Assembly - N55 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:394063
Part#: 11288604266
In Stock
$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less

Schrick - Corporate Logo
T#:342372
Part#: 041513800
In Stock
$ 263.99

This product was last offered at the strikethrough price on
07-07-2026

$ 165.00 USD
Free Shipping
$ 165.00 USD
Free Shipping
The roller rocker arms transfer the rotational force of the camshaft to open the intake and exhaust valves. One end is raised and lowered by the rotating lobe of the camshaft, while the other end acts on the associated valve stem. If a roller rocker arm has failed you may experience a constant ticking noise during engine operation, or alternatively if the rocker arm has broken, you will receive multiple misfires and a rough running engine.
Show More Show Less
Ina - Corporate Logo
T#:304220
Part#: 11287530314
In Stock
$ 84.99

This product was last offered at the strikethrough price on
08-12-2026

$ 59.49 USD
Free Shipping
$ 59.49 USD
Free Shipping

This is an OEM INA�mechanical tensioner for the serpentine belt. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554453
Part#: 11288673720
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.
Timing Chain Tensioner INA- M52 2.5L & 2.8L / S54 3.2L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:403736
Part#: 11317838675
In Stock
$ 139.99

This product was last offered at the strikethrough price on
05-06-2026

$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping

Turner Motorsport BMW Timing Chain Tensioner Replacement

Introducing the BMW Timing Chain Tensioner Replacement by Turner Motorsport, a vital component to maintain optimal tension and prevent timing chain issues. Engineered for reliability, this replacement ensures the proper functioning of your cam gears and crank, preventing potential engine damage.

Benefits:

  • Crucial for timing chain tension
  • Prevents chain skipping
  • Safeguards against catastrophic engine damage
  • Quiets noisy chains for a smoother engine operation

Replace your BMW's timing chain tensioner with this Turner Motorsport solution to keep your engine running smoothly.

Show More Show Less

OEM INA Timing Belt Tensioner Roller -- E21 E30 E12 E28 E34
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:348865
Part#: 11311711153
Ships in 2 Business Days
$ 60.78 USD
Free Shipping on orders $49 and up

This is an OEM INA timing belt tensioner that keeps pressure on the engines timing belt and prevents its from slipping out of time. OEM replacement for BMW part # 11311711154 and 11311711153.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

 

Show More Show Less

Ina - Corporate Logo
T#:4466
Part#: 11281427252
In Stock
$ 52.99 USD
Free Shipping
$ 52.99 USD
Free Shipping

This tensioner is for either the Water Pump or Alternator on cars with the mechanical belt tensioner system. Please check to ensure your car does not have the hydraulic tensioner. This tensioner comes with the pulley assembly.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Only for cars with Mechanical belt tensioner systems.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less
OEM INA Belt Tensioner - E9X E82 E60 E82 with N54 engine
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19305
Part#: 11287563927
In Stock
$ 107.99

This product was last offered at the strikethrough price on
04-15-2026

$ 72.50 USD
Free Shipping
$ 72.50 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belts on BMW's with the N54 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
OEM INA Hydraulic Valve Lifter -- M62 BMW
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19050
Part#: 11321440256
Ships in 2 Business Days
$ 82.13

This product was last offered at the strikethrough price on
07-10-2026

$ 40.63 USD
Free Shipping on orders $49 and up
$ 40.63 USD
Free Shipping on orders $49 and up

Any time a valve service must be performed or there is valve damage, it is recommended to replace the hydraulic lifters to keep the valve train in top condition. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


CSF Performance DCT Transmission Cooler - F8x M3/M4
2X Entries Into Our F80 M3 Sweepstakes
CSF - Corporate Logo
T#:401085
Part#: 8081
In Stock
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
Featuring a dual-core design that provides a 67% increase in cooling rows for greater cooling efficiency, the CSF Performance DCT Transmission Cooler is the ultimate plug-n-play transmission cooler. This radiator utilizes a single row, high pressure, 26mm multi channel microtube and fits the stock location, giving you a 30% increase in cooling efficiency with an easy and simple installation.
Show More Show Less
Rogue Engineering - Corporate Logo
T#:567568
Part#: S54VAN
Back Ordered
$ 59.00 USD
Free Shipping
$ 59.00 USD
Free Shipping
Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible
Show More Show Less
OEM INA A/C Belt Tensioner - BMW E36 E39 M50 M52 S50 S52
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:579839
Part#: 5330001100
Ships in 2 Business Days
$ 62.42 USD
Free Shipping on orders $49 and up
$ 62.42 USD
Free Shipping on orders $49 and up
Provides tension between crank pulley and A/C compressor

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
Ships in 1 Business Day
$ 29.99

This product was last offered at the strikethrough price on
09-02-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

Glyco - Corporate Logo
T#:375825
Part#: 11241284849
Ships in 2 Business Days
$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 85.59 USD
Free Shipping on orders $49 and up
$ 85.59 USD
Free Shipping on orders $49 and up
Standard bore - 45mm
Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less

CSF - Corporate Logo
T#:22361044
Part#: 8266
In Stock
Sale - Save 10% $ 599.00

This product was last offered at the strikethrough price on
10-04-2026

$ 539.10 USD
Free Shipping
Sale - Save 10%
$ 599.00

This product was last offered at the strikethrough price on
10-04-2026

$ 539.10 USD
Free Shipping
An industry-leading reputation and overwhelming success with BMW cooling has made CSF the #1 cooling choice for the G8X M3/M4/M2. CSF is leading the way in BWM G8X (S58) Cooling and adding another product to the Power Cooling Package. Now CSF is pleased to announce the release of its BMW F8X M3/M4/M2C High-Performance Engine Oil Cooler. The new CSF Engine Oil Cooler is a great addition massively successful G8X Cooling Suite. Like the other cooling systems on the G8X, the factory oil cooler does a pretty good job in stock form. However, once you start adding a lot of power and pushing the car in aggressive driving conditions, the factory systems start to show its limitations. As more and more owners have pushed the limits of their S58, CSF is here to keep them cool. When designing this new cooler, CSF wanted to ensure the best possible performance with factory-like fitment. This oil cooler is a truly unique design using CSF’s AC Condenser Technology. The 1-Row Super-High Pressure 32mm 10-Channel Microtube provides optimal oil flow and maximum surface area contact. By keeping the factory mounting location and relative dimensions, the factory ducting and shrouds are all reused with no modifications necessary. In addition, CSF added a rock guard to keep the cooler safe. You’ve no doubt heard horror stories about an OEM cooling getting punctured and spilling oil all over the road or track. Now you can feel safer and more confident that your oil system is safe from road debris. With many motorsports teams and race enthusiasts now pushing over 800 horsepower, the S58 is seeing oil temperatures well above normal. Once oil temperatures pass a safe limit the G8X will go into limp mode. Needless to say, this can ruin a race, track session, or your overall driving fun in general. CSF is here to keep your S58 running at peak performance. Features: 8mm Tall Multi-Louvered Fin vs. OEM 6mm Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 32mm 10-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow OEM Style Inlet/Outlet Connections Drop-in Fit Requires No Modifications to Install 2-Year Limited Warranty Ideal for Road Racing, Drag Racing, and Vehicles With Increased Performance Applications: 2022+ BMW G87 M2 (incl. Competition) – 6MT & ZF8 Auto 2021+ BMW G80 M3 (incl. Competition) – 6MT & ZF8 Auto 2021+ BMW G82/G83 M4 (incl. Competition & CSL) – 6MT & ZF8 Auto 2022+ BMW G81 M3 (incl. Competition) – 6MT & ZF8 Auto OEM Part Number: BMW: 17118095293 BMW: 17218095297
Show More Show Less
OEM INA Accessory Belt Tensioner Assembly - BMW N20 2.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:587382
Part#: 11287594969
In Stock
$ 72.99

This product was last offered at the strikethrough price on
04-15-2026

$ 43.99 USD
Free Shipping on orders $49 and up
$ 43.99 USD
Free Shipping on orders $49 and up
This is the main belt tensioner for the accessory belt.

OEM INA Idler / Deflection Pulley - E9x E82 E83 E60 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:12945
Part#: 11287535860
In Stock
$ 23.28 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


For cars with the N52 6 cylinder engine.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2007-2010 E70 BMW X5 3.0si
2007-2010 E83 BMW X3 3.0i X3 3.0si

Show More Show Less

Ina - Corporate Logo
T#:403662
Part#: 11311738700
In Stock
$ 56.20

This product was last offered at the strikethrough price on
07-23-2026

$ 47.99 USD
Free Shipping on orders $49 and up
$ 47.99 USD
Free Shipping on orders $49 and up
Guide used to tension the timing chain
OEM INA Accessory Belt Tensioner Assembly - N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386297
Part#: 11287582946
In Stock
$ 115.99

This product was last offered at the strikethrough price on
09-16-2026

$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belts on BMW's with the N55 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:378657
Part#: 11317531813
In Stock
$ 73.99 USD
Free Shipping
$ 73.99 USD
Free Shipping

This is an OEM INA Timing Chain Tensioner. Keeping pressure on the timing chain, this keeps the chain from slipping teeth and causing the timing to be off, potentially leading to engine damage. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


Ina - Corporate Logo
T#:12942
Part#: 11281709613
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Hydraulic Tensioner. It provides pressure to the Water Pump and Alternator belt to assure maximum performance and prevent the belt from slipping, causing decreased cooling or low charge rates from the alternator.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

Show More Show Less
Ina - Corporate Logo
T#:2479
Part#: 11281433571
In Stock
$ 68.91

This product was last offered at the strikethrough price on
10-02-2026

$ 67.76 USD
Free Shipping
$ 67.76 USD
Free Shipping

This is an OEM INA AC Belt Tensioner with pulley for all 2001-2006 E46 M3, as well as all 1999-2002 non-M E46 3 series models. These belt tensioner units are known to fail, and include the tensioner pulley (as shown).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This Air Conditioning / AC Belt Tensioner with Pulley fits:
1999-2000 E46 3 Series 323i, 323Ci, 328i, 328Ci
2001-2002 E46 3 Series 325i, 325Ci, 330i, 330Ci
2001-2006 E46 M3 coupe & convertible

Show More Show Less
CTS - Corporate Logo
T#:11660862
Part#: CTS-IGN-009
In Stock
Sale - Save 16% $ 34.99

This product was last offered at the strikethrough price on
09-29-2026

$ 29.32 USD
Free Shipping
Sale - Save 16%
$ 34.99

This product was last offered at the strikethrough price on
09-29-2026

$ 29.32 USD
Free Shipping

BMW & MINI B46 B58 CTS Turbo High Performance Ignition Coil is designed to enhance the ignition system of your BMW and MINI vehicles, providing a significant upgrade over factory components. Ideal for F/G series BMWs, F series MINIs, and A series Toyota Supra vehicles, these ignition coils deliver a 10% stronger spark compared to stock units, ensuring optimal engine performance. No additional tuning is required for installation, making this a straightforward upgrade. Also compatible with 2020+ Toyota Supra B46/B58 and 2014+ F5X Mini Cooper models.

  • High-Performance Upgrade: Delivers a 10% stronger spark compared to factory ignition coils.
  • Broad Compatibility: Fits BMW & MINI B46/B58 engines, as well as 2020+ Toyota Supra B46/B58 and 2014+ F5X Mini Cooper vehicles.
  • No Tuning Required: Simple installation without the need for additional engine tuning.
  • Enhanced Engine Performance: Ensures peak performance and reliability for your vehicle’s ignition system.
Show More Show Less

Corteco - Corporate Logo
T#:362312
Part#: 22111092895
In Stock
$ 120.82

This product was last offered at the strikethrough price on
05-13-2026

$ 81.99 USD
Free Shipping on orders $49 and up
$ 81.99 USD
Free Shipping on orders $49 and up
Secures engine to subframe for a vibration-free connection

OEM INA A/C Belt Tensioner Pulley Assembly -- E39 M5
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362594
Part#: 11281407520
In Stock
$ 60.99 USD
Free Shipping
$ 60.99 USD
Free Shipping

This is an OEM INA tensioner for the air conditioning belt on E39 M5 BMW's. This tensioner keeps the belt for the Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM INA A/C Belt Hydraulic Tensioner -- E39 E38 E31 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362596
Part#: 11281745545
In Stock
$ 51.99

This product was last offered at the strikethrough price on
06-16-2026

$ 50.59 USD
Free Shipping on orders $49 and up
$ 50.59 USD
Free Shipping on orders $49 and up

This is an OEM INA Hydraulic Tensioner. It provides pressure to the A/C belt to assure maximum performance out of the A/C compressor and prevent the belt from slipping.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

Show More Show Less

Glyco - Corporate Logo
T#:375823
Part#: 11211706847
In Stock
$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 126.82 USD
Free Shipping
$ 126.82 USD
Free Shipping
Standard bore
Glyco - Corporate Logo
T#:183
Part#: 11241310515
In Stock
$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.
Show More Show Less

Corteco - Corporate Logo
T#:370103
Part#: 22116779970
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
Keep your engine securely mounted

OEM INA Chain Tensioner Piston - BMW M10 M30 M70 S70 M73
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:35998430
Part#: 11310631131
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up

INA - Chain Tensioner Piston for BMW Engine Performance

INA - Chain Tensioner Piston is an essential component for maintaining the precision and reliability of your BMW engine. Designed to deliver superior performance, this OEM-grade part ensures optimal tension in the timing chain, preventing slack, excessive wear, and potential engine damage. Available through Turner Motorsport, this chain tensioner piston guarantees compatibility and lasting durability for a variety of BMW models.

Key Benefits:

  • OEM-quality part engineered for BMW vehicles
  • Enhances timing chain performance for smoother engine operation
  • Reduces chain noise and prevents premature wear
  • Built with high-strength materials for maximum durability
  • Simplifies installation with an exact-fit design

Ensure your BMW operates at peak efficiency by upgrading to the INA - Chain Tensioner Piston, available at Turner Motorsport. This premium component is a must-have for engine repairs, regular maintenance, and improved vehicle performance.

Show More Show Less
Corteco - Corporate Logo
T#:594933
Part#: 11811132323
In Stock
$ 43.56

This product was last offered at the strikethrough price on
06-01-2026

$ 25.99 USD
Free Shipping on orders $49 and up
$ 25.99 USD
Free Shipping on orders $49 and up
Excessive driveline vibration is caused by one of a few things, but more than likely, it is the mounts in your vehicle. They keep your engine and transmission secure for more positive shifting and driveline triangulation as well as absorbing vibration. If any of these are occuring in your BMW, it's time to examine your mounts.
Show More Show Less
OEM INA Idler Pulley -- N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:402395
Part#: 11287615130
In Stock
$ 35.87

This product was last offered at the strikethrough price on
10-01-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less


CSF Race-Spec Dual Pass Oil Cooler - E46 S54
2X Entries Into Our F80 M3 Sweepstakes
CSF - Corporate Logo
T#:384658
Part#: 8032
In Stock
$ 549.00 USD
Free Shipping
$ 549.00 USD
Free Shipping

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the oil cooler as well. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit has 17 cooling tubes in the front with anther 6 in the rear of the cooler and still fits in the stock location without any issues.

Fits the following BMW:
2001-2006 E46 BMW M3

Show More Show Less
Ina - Corporate Logo
T#:31059479
Part#: 11287838194KT
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
If your water pump or alternator belt tensioner has failed because of the pulley or bearing, this replacement pulley is all you need to get your BMW back on the road! BMW and other brands usually sell the tensioner with the metal arm included, which increases the cost, even though the arm often doesn't need replacement. This OEM replacement is a much more affordable option, saving you $150 or more compared to the Genuine BMW tensioner.
Show More Show Less
Corteco - Corporate Logo
T#:362315
Part#: 22111092896
In Stock
$ 153.05

This product was last offered at the strikethrough price on
06-18-2026

$ 149.99 USD
Free Shipping on orders $49 and up
$ 149.99 USD
Free Shipping on orders $49 and up
Secures engine to subframe for a vibration-free connection

CTS - Corporate Logo
T#:50899212
Part#: HW-446
Ships on Nov 16, 2026
Sale - Save 15% $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.49 USD
Free Shipping
Sale - Save 15%
$ 129.99

This product was last offered at the strikethrough price on
09-29-2026

$ 110.49 USD
Free Shipping
Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.
Show More Show Less

OEM INA Idler Pulley -- E88 E82 E9X
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386299
Part#: 11287578675
Ships in 1-2 days
$ 42.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM INA Deflection Pulley -- N62 E60/1 E63/4 E65/6/7 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362736
Part#: 11287549557
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Ina - Corporate Logo
T#:19306
Part#: 11287557851
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
CSF - Corporate Logo
T#:598761
Part#: 8145
In Stock
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
If you are having issues keeping your BMW's oil temps from going out of control, it may be time to upgrade your oil cooler! This N55 oil cooler for your BMW is specifically designed by CSF to offer the best cooling possible, keeping your engine happy and you on the track longer! Features & Specifications: Innovative 2-Core In-Series System Secondary In-Series Backside Cooler has an Additional 5 Rows of Cooling for a ~40% Increase in Heat Rejection Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube High-Density Multi-Louvered Fin Design for Maximum Surface Area Contact Converted to a Single-Pass Design with High-Pressure Return Line for Optimal Flow “Drop-In Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud/Ducting World’s 1st and Only True “Plug-And-Play” Upgraded Engine Oil Cooler for the BMW N55 Engine Track Tested and Proven by Hittman Racing’s M235iR Endurance Race Car Requires Additional ½ Quart for Proper Fill-up During Installation (OEM Cooler: 7 Qts./ CSF’s Upgrade Race-Spec N55 Oil Cooler: ~7.5 Quarts) OEM #: 17217618360
Show More Show Less

Genuine BMW Hydraulic Belt Tensioner - BMW E34 M50
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591480
Part#: 11281722789
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
This item has been superseded to 11287838797


E30 Group A/DTM Race Style Oil Cooler - BMW E30 M3 325
2X Entries Into Our F80 M3 Sweepstakes
CSF - Corporate Logo
T#:8076771
Part#: 8218
In Stock
$ 509.00 USD
Free Shipping
$ 509.00 USD
Free Shipping
Designing the ultimate BMW E30 Oil Cooler was not an easy task. While with custom fabrication anything is possible, CSF prides itself on making upgraded products that fit like a factory unit. Fortunately, BMW already did some of the leg work for this in the late 1980s. The new CSF #8218 is based on the race-proven and championship-winning formula used by BMW. To give you some history on this topic, we have to go back to 1987. After BMW decided to enter Touring Car and DTM racing, they created what most would consider to be the ultimate E30 M3. In the span of about 5 years, the Group A spec M3 became the most successful touring car of all time. This race-spec BMW won two champion’s titles in the European Touring Car Championship and German Touring Car Championship (aka DTM) and countless other victories. The BMW Engineers had to design an oil cooler that could keep up with the added power of the race-spec engine and perform under the grueling conditions on the track. The size of the standard factory oil cooler was increased by about 50% while using the same mounts and connectors as the standard production M3. The CSF E30 Group A / DTM Race Style Oil Cooler is the same size as these race coolers with some modern upgrades/updates. While your original system may still be functional, it is likely not in the best shape. Dented, clogged, and weathered coolers just can’t perform like a new cooler. Even then, the old tube and fin design don’t compare to the durability and performance of a bar and plate design. CSF understands that most owners don’t want to change the look of their Bavarian classics at this point. That’s why the E30 Group A / DTM Oil Cooler was design to fit in the factory location with no custom mounting hardware necessary. The CSF Oil Cooler offers superior cooling capacity, modern technology, and costs less than a genuine OE replacement. When designing this new cooler, CSF wanted to ensure the best possible performance while ensuring the cooler was as durable as possible. As you’ve seen, oil coolers and other heat exchangers can take quite a beating over time. CSF utilizes an extremely rugged and durable Bar/Plate design that can stand up to far more abuse. The CSF “Aero-Flow” Bar design reduces weight compared to other Bar/Plate designs while maintaining maximum strength and air flow. These “Aero-Flow” bars improve heat dissipation with high-density turbulated multi-louvered fins. Turbulation increases the turbulent flow through a tube, effectively increasing heat exchange rates and abilities. At around 50% larger in size, the CSF #8218 Oil Cooler increases both fluid capacity and core surface area. The overall performance of the Oil Cooler far exceeds the factory cooler’s limits. 100% All-Aluminum construction ensures the best performance and durability. In addition, the black powder coat finish provides extra protection and offers an OEM look behind the grille of your E30. Features & Specifications: Group A / DTM E30 M3 Oil Cooler Design Direct fit oil cooler for BMW E30 M3 Can fit all E30 Chassis (see applications and fitment notes) High Efficiency & Rugged Durability Bar/Plate Design “Aero-Flow” Bar Lightweight Construction for Strength and Maximum Flow Cast End Tanks with 100% Tig Welded Construction Satin Black Finish for Extreme Protection Against Corrosion and Debris Comes complete with fitting kit for both OEM style as well as -10 AN male connections Fitment Notes: 1986-1993 BMW E30 M3 (S14) The long factory oil hard line will not be able to use support brackets on the back of the radiator. This is due to the adapter fittings pushing the lines out about a ½” from factory so the brackets won’t line up but the lines will still run to the proper location and can be connected. 1985-1987 (up to 09/87) BMW E30 325 w/ Factory Oil Cooler Requires custom lines (factory hard line passes over the oil cooler normally but this unit is too tall to run that line over the top). 1988-1993 BMW E30 325 w/ Factory Oil Cooler Requires custom lines & mounting hardware. E30 Chassis has provisions for OEM mounting hardware. OEM Mounting Hardware part number listed below. 1984-1993 BMW E30 3-Series w/o Factory Oil Cooler Requires lines, mounting hardware, and sandwich plate (or provision for oil hook up). E30 Chassis has provisions for OEM mounting hardware. OEM Mounting Hardware part numbers listed below. The BMW OEM Parts Required for Retrofit: Body bracket: #17211719126 x 2 Rubber grommet: #17211712839 x 2 Grommet insert: #17211712844 x 2 Grommet hex head screw: #07119916886 x 2 Oil cooler O-rings: #17222245358 x 2
Show More Show Less
Corteco - Corporate Logo
T#:596691
Part#: 11340035853
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
Burning oil at start-up and the first few minutes of running often is a sign your valve seals are bad. What happens is your valve seals become brittle and shrink up when cold, causing oil consumption and blue smoke from the exhaust. When the engine warms up, the seals expand, stopping the consumption.
Show More Show Less
Ina - Corporate Logo
T#:42302011
Part#: VV1122
Back Ordered
$ 77.99 USD
Free Shipping on orders $49 and up
$ 77.99 USD
Free Shipping on orders $49 and up
For BMW owners looking to maintain factory-grade precision and reliability your BMW demands—ensuring reliable, responsive performance for years to come.


CTS - Corporate Logo
T#:5788183
Part#: CTS-IT-340
Ships in 5 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
CTS Turbo is proud to release the F-series BMW B58 3.0L intake which is a complete replacement for the OEM system. The design intent was to create the largest, highest flowing intake on the market. Features a massive 6' velocity stack air filter and a 3.5' aluminum intake pipe that connects perfectly to the turbo inlet. The MAF sensor is placed into same orientation as from factory to provide perfect readings. An extra turbo heatshield is included in order to keep air intake temperatures as low as possible. Without any extra tuning, peak power gains range from 12 to 20HP (fuel and elevation dependent). All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound. Features: Massive velocity stack reusable air filter 3.5' smooth air intake pipe CNC machined MAP sensor mount Black powder coat for OEM look Two heat shields with rubber seals Great sound and power increase Affordable price without sacrificing quality
Show More Show Less
CTS - Corporate Logo
T#:5788138
Part#: CTS-TR-0300
Ships in 5 Business Days
Sale - Save 10% $ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD
Free Shipping
Sale - Save 10%
$ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD
Free Shipping
If you looking to get the best daily-driven power and torque out of your N54, this is the kit for you! CTS Turbo is proud to announce their standard Stage 2 500 BMW N54 turbocharger kit. Using larger wheels than stock these turbos are good for 550-600hp, with a good low-end torque and excellent boost response, without sacrificing the top end. Features: 6-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2″ compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2 turbos is required No core required, complete new units
Show More Show Less