Protect your Mini with the Turbo Heat Shield, an essential accessory to prevent hood paint discoloration, scoop warping, and underhood heat damage caused by excessive turbocharger heat. Additionally, it enhances the underhood appearance of your MINI. This metal plate mounts to factory points using supplied hardware, effectively reducing the amount of heat that bypasses the factory shield. While not encasing the turbocharger entirely, it serves as a secondary defense, complementing the factory-installed heat shield that isn't fully effective in preventing long-term hood paint and scoop damage.

• Prevents hood paint discoloration and scoop warping
• Guards against underhood heat damage caused by excessive turbocharger heat
• Enhances underhood appearance
• Mounts to factory points with supplied hardware
• Acts as a secondary defense in addition to the factory heat shield

MINI B38/B36 JMTC Refurbished Turbocharger offers a complete overhaul to restore turbocharger performance to a like-new condition. JMTC's refurbishment process includes a thorough cleaning and replacement of all internal components that may have been worn or damaged, such as turbine shaft bearings, thrust bearings, pressure seals, cartridges, and end housings. Components not meeting stringent standards are replaced, ensuring optimal performance.

• Thorough Overhaul: Includes cleaning and replacement of all internal components to ensure reliable functionality.
• High-Quality Parts: Only components meeting strict quality standards are used, with damaged parts replaced.
• Extended Warranty: Refurbished units retain JMTC's full warranty for added peace of mind.

Additional Recommendations:

• Pre-Installation Tips: For optimal results, JMTC recommends refurbishing the OEM catalytic converter or using a high-flow downpipe and installing a new oil line. This helps prevent recurrence of previous issues and ensures the turbo operates at its best.

Turbo maintenance has become part of our daily lives here. Our Service department does several turbo overhauls, wastegate adjustments, carbon cleaning, and upgrades every week. For the DIY owner, however, having a complete overhaul kit takes some of the stress out of 335 turbo replacement and this kit includes all of the basic items. It's highly likely N54 turbos will have to be replaced before 100,000 miles. Signs of a failing turbo are high oil consumption and blue smoke from exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems the turbos need to be replaced. 

This package uses new (not rebuilt) Mitsubishi turbochargers (the original supplier to BMW). These are essentially direct replacement turbos but we went straight to the manufacturer instead of going through BMW. They are the same as the factory turbos but without a BMW logo so you save yourself a few hundred dollars. It includes everything that needs replacement during a 335 N54 twin turbo overhaul -

• Front and rear new OEM Mitsubishi turbos (the original supplier of BMW turbos)
• 1 gallon of Genuine BMW coolant
• ​16 - ASA M7x39 studs
• 16 - Flange nuts
• All required gaskets and o-rings
• Water pump install hardware
• Replacement vacuum hose
• T-bolt clamps

These are brand-new turbos so a core charge does not apply.

JM Turbo Cooper - Extreme GTD47 K04 Turbocharger Upgrade

JM Turbo Cooper offers the Extreme GTD47 K04 turbocharger upgrade designed to deliver outstanding reliability and high-performance gains for the 2007+ MINI Cooper. This upgrade is a top choice for Mini and Peugeot owners, providing exceptional power output for applications exceeding 280hp.

Update: The improved gasket design on the back side now features a seamless gasket inset, and the package includes a new gasket for your convenience.

The JMTC Extreme GTD47 upgrade boasts a high-pressure, high-flow, dual-scrolling turbo that features a substantial 50mm compressor wheel. This design ensures maximum boost at the top end of the RPM range, making it ideal for track, off-road, and extreme street applications. The large GTX exhaust turbine complements the setup, delivering extra boost at high RPMs and preventing torque loss compared to the stock K03 turbine.

Whether you seek extreme track performance, drag strip dominance, or unrivaled street upgrades, this turbocharger is the perfect choice. It offers impressive torque and durability, outperforming many other options on the market. To fully unleash its potential, we recommend pairing it with one of our aftermarket exhaust systems.

It's important to note that to harness the additional power, a custom tune is required. Running without a tune will result in minimal to no HP gain.

Estimated Power Gains:

• Approximately 60hp with a tune, intercooler, downpipe, cold air intake, new plugs, basic maintenance, and carbon blasting/cleaning.
• 120hp or more with all the above modifications, plus a ported head, larger valves, ICE pipe, intercooler, and a 3"+ or larger exhaust system.

Extreme GTD Upgrade Features:

• Brand new turbo!
• 47mm billet compressor
• High-flow GTX exhaust turbine
• High-strength K04 internals
• Upgraded 360-degree bearing
• Designed for higher pressure
• High-temperature alloy turbine housing
• Dual-scrolling turbine housing
• Water-cooled bearing housing

For engine and turbocharger reliability, JMTC recommends a 3.0" or larger downpipe/exhaust size for the GTD turbochargers. Please avoid using the stock downpipe or stock-sized catalytic converter.

The OEM intake boot can be used with the removal of the inner sleeve for N14 engines. For N18 engines, the OEM boot at the turbo connection will need to be heated and expanded slightly, which can be done with a heat gun. This turbocharger also fits AEM intake, NM Eng intake, and Forge Intake (Boot). Please note that the hose might need to be warmed and stretched over with a hose expander.

Super SF56 Upgraded Turbocharger - New by JM Turbo Cooper is the ultimate performance upgrade for BMW enthusiasts. Engineered for both street and track use, this turbocharger features a massive 50mm compressor and upgraded 9-blade lightened high-flow turbine. It delivers quick full boost and significant power gains throughout the RPM range, maintaining quick response and enhancing torque and power over the original turbo.

• Massive 50mm billet compressor for increased airflow
• Upgraded 9-blade lightened turbine for improved performance
• High-strength internals and upgraded 360-degree bearing
• Designed for higher pressure and temperature alloy turbine housing
• Water-cooled bearing housing for durability
• Quick spooling dual scrolling housing for optimal response

Upgrade your BMW with the Super SF56 Upgraded Turbocharger for unparalleled performance and power gains.

MINI F54 to F57 JMTC B38/B36 Refurbished Turbocharger

The MINI F54 to F57 JMTC B38/B36 Refurbished Turbocharger features a high-flow twin-scroll turbine and an extended tip compressor, designed to deliver early and sustained boost. This turbocharger enhances torque and power across the entire power band, providing excellent response and performance throughout the RPM range. For optimal results, pairing this turbo with an aftermarket exhaust system is recommended to fully realize its potential.

• High-flow twin-scroll turbine for improved performance
• Extended tip compressor wheel for early spool-up and sustained boost
• High-temperature alloy turbine housing for durability
• Water-cooled bearing housing for enhanced cooling
• Includes a $200 core charge, refundable upon core return

Additional Information:

• New oil supply line recommended for best performance
• Optional refurbished catalytic converter available to extend the warranty to 2 years when ordered together
• Refurbished parts may exhibit signs of previous use, such as scratches or imperfections
• CNC work done before porting; exact port matching within 100 microns cannot be guaranteed due to extrude porting removing material from internal surfaces

BMW G30 19" V710 Wheels - Staggered Set Of Four offer an outstanding upgrade for enhancing the appearance and performance of your vehicle. Renowned for their innovative design, Rotiform wheels are a top choice for car enthusiasts looking to combine style with functionality.

• Size: 19"x8.5"
• Offset: 45mm
• Center Bore: 66.6mm
• Bolt Pattern: 5x112
• Color: Satin Black
• Lug Seat: Conical Seat
• Weight: 32.85 lbs per wheel

These wheels are designed for those who want to make a statement while enjoying superior build quality and performance. Ball seat wheel bolts are required for installation.