Showing 3133 results for ""

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Free ground shipping!

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Discover the performance prowess of Scorpion stainless steel exhaust systems, now available in the U.S. through Turner Motorsport for Euro Model vehicles with a production date up to 09/1987. Engineered in England, these sought-after exhaust systems are crafted from high-quality 304 stainless steel, ensuring durability and longevity. Designed to provide a horsepower boost, they strike a balance by delivering enhanced performance without being excessively loud, making them ideal for tuners worldwide.

• Free-flow design for improved horsepower.
• High-quality 304 stainless steel construction for durability.
• Engineered in England for global tuning enthusiasts.
• Reduced noise compared to other free-flow systems.
• TüV certified for quality assurance.

Elevate your BMW's performance with the Scorpion stainless steel exhaust system, now available at Turner Motorsport.

The Dinan stainless steel axle-back exhaust is designed to compliment the E39 M5, rather than offend the driver and passengers with harsh exhaust notes. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Dual 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

Most notably, Dinan offers a four year, 50,000-mile warranty that is unparalleled by most other exhaust manufacturers.

• +6 HP @ 6500 RPM / +5 lb/ft @ 6500 RPM
• Durable 20-gauge 304 stainless steel mufflers
• Pleasant tone without excessive loudness thanks to Dinan's Tuned Resonance Chamber Technology
• Weight savings of 28+ lbs. over the stock system
• Worth 3 points toward your Dinan badge

This item fits the following BMWs:
E39 M5

Performance Cat-Back Exhaust for pure unrestricted power and sound. This exhaust takes out all of the stop gates and pairs with the S58 for an iconic driving experience.

The G87 is no stranger to performance. Right out of the box the new M2 features rocket-like acceleration, and great handling and is even offered with a manual gearbox. With our Turner Performance exhaust you get a more engaged feeling improving the driving experience. Increased sound you can both hear and feel offers a direct line of feedback between you and the car. The added volume allows you to feel where you are in the power band without looking at your rpm gauge allowing you to feather the exhaust around turns and when shifting in your manual transmission. Along with the increased volume and feeling our exhaust features smooth transitions and improved flow for improved throttle response and sound on deceleration.

Our mission was to amplify the G87 with a proper Cat-Back exhaust system. To accomplish this goal, our engineers increased flow, reduced weight by 27 lbs, and delivered an exhaust system that captures the full unrestricted sound of the twin-turbo inline-6 S58 engine. The increase in flow was gained from dual 3.0" 304 stainless steel exhaust pipes that feed into a free-flowing rear section. We specifically designed this catback with flow in mind to ensure the exhaust would never be a restriction. Weight reduction is achieved by replacing the factory piping with lightweight 304ss for a more-than-modest weight advantage free from the added weight of the bulky factory muffler. The best part of the Race-Inspired Cat-Back is the capability to perform far beyond the point that the factory exhaust. All of this plus the direct fitment and straightforward installation leads to our Turner Race Inspired Catback exhaust being the clear answer in your mission to find the best exhaust for your S58-powered M2.

Part Design and Features:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Weight savings over the OEM exhaust system:
OEM Catback (without tips): 60 lbs
Turner Stainless Race Catback (without tips): 33 LBS!
27 lb weight reduction!
Retains factory emissions
Kit Contents:

Dual 3" 304SS Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance, and weight savings.
Straight through "Race-inspired" rear section
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers
- Click HERE for Installation Instructions -

Carbon Fiber UNIVERSAL Swivel Exhaust Tips - 4.0" - Pair are designed to provide a stunning, adjustable upgrade for any vehicle. These high-quality exhaust tips feature a unique swivel collar design, allowing them to be adjusted in any direction for the perfect fitment. Simply position the tip to your desired angle and secure it with a hex bolt tightened to 14 ft-lbs (19 Nm), ensuring it stays in place.

• Customizable Fitment: The swivel collar design allows for versatile adjustment, ensuring a perfect alignment with your vehicle's exhaust system.
• Premium Materials: Constructed with single wall stainless steel and a rolled carbon fiber edge for a high-end look and durability.
• Durable Construction: Includes chrome-plated nuts, 304SS cap screw, clamp, and insert ring for long-lasting performance.
• Sleek Appearance: Features a slant cut and matte clear coated ECS Tuning vinyl logo for a stylish finish.
• Universal Fitment: Designed to fit various vehicles; modification may be required for proper fitment.

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (5.0" Tip + 1.0" Clamping Surface)
• Outlet Size: 4.0"
• Outlet Style: Single Wall Stainless, Rolled Carbon Edge, Slant Cut
• Sold as a Pair: Includes 2 tips.

URO Oxygen Sensor - For BMW N54 N55 N20 Engines

The URO Oxygen Sensor - For BMW N54 N55 N20 Engines is a high-quality replacement designed to restore proper oxygen sensor function and optimize the engine air-fuel mixture. This direct-fit OE replacement ensures seamless compatibility with factory components, providing accurate fuel metering for improved engine efficiency and emissions control. The plug-and-play design simplifies installation, allowing for a hassle-free replacement without modifications. Built from high-quality materials, this oxygen sensor is engineered to withstand extreme exhaust system temperatures, ensuring long-lasting durability and consistent performance. Featuring alloy conductors that minimize electrical resistance, it delivers precise readings for optimal fuel efficiency. Backed by a 24-month unlimited mileage warranty, it offers peace of mind for BMW owners seeking reliable performance.

Key Benefits:

• Direct-fit OE replacement restores proper oxygen sensor function and fuel metering
• Plug-and-play connection for quick and hassle-free installation
• High-temperature resistant materials ensure long-lasting durability
• Alloy conductors minimize electrical resistance for accurate sensor operation
• 24-month unlimited mileage warranty for added confidence

Upgrade your BMW N54, N55, or N20 engine with the URO Oxygen Sensor and experience improved efficiency, emissions control, and long-term reliability.