Differential Mounts

At Turner we are very familiar with the N55 and B58. These are the new generation engines that you you can pull quite a bit of power from quite easily, if you want to put the power to the pavement the factory bushings and reinforcement just wont cut it. With soo many performance parts available for the turbocharged engines, it is very easy to make power but keeping the car under control can be another story. Reduce wheel hop, extend the life of your bearings, and add stability to your chassis!

Our in-house engineers created a solution to help transfer the power to the ground, the result is a simple yet astounding improvement to the performance of your vehicle. The rear diff brace helps put power down by reducing wheel hop and preventing losses during power transfer. With the added rigidity the rear end feels tighter for high speed applications and will extend the life of your choice of OE or aftermarket bushings.

Soft factory rubber differential bushings absorb vibrations between the chassis and differential, providing comfort and softness for normal driving conditions. As these bushings wear you will experience lackluster performance/response and they will need to be replaced. You can extend the life of these bushings while providing increased chassis stability with our differential brace for your F chassis. Add new poly differential bushings for an even better experience (T#:656153)

Note: Drilling is required for installation

Benefits:

Reduce unwanted drivetrain deflection, offering a more enhanced driving experience
Reduced wheel hop
Extend the life of your bushings
Reduced wear on the differential bearing
Increased transfer of power to the pavement
Increased high speed stability
Engineered by Turner to withstand extreme driveline forces of over 1000 Ft/lbs of torque
Provides necessary installation tooling to properly secure brace
PART DESIGN:

Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment
Constructed using aircraft grade 6061-T6 Aluminum, finished in Turner Blue anodization
FEA simulations run to maximize stiffness to weight at base engine power and torque levels with plenty of room for growth
Corrosion resistant Yellow Zinc-Chromate coated grade 10.9 Fasteners
KIT CONTENTS

Turner Blue Anodized Rear Diff Brace
Drill guides for precision installation
Hardware for installation
INSTALLATION:

- Click HERE for Installation Instructions -
Requires 10mm + 15mm carbide tip steel drill bits (T#16907167)
PRODUCT DEVELOPMENT

Turner F Chassis Differential brace was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Designed for track drivers, drift enthusiasts, and drag racers alike, this all-in-one driveline upgrade eliminates the factory weak points and reinforces your drivetrain for high-performance abuse. Whether you're laying down 500HP, clutch-kicking through corners, or launching hard at the strip, this cover keeps your differential secure, cool, and ready for battle.

The stock E30 differential cover features a single mounting provision—fine for a stock M20, but guaranteed to fail on your boosted high-horsepower M5X build. After years of broken covers, mounting tabs, and dreams, our team of E30 enthusiasts engineered the ultimate fix.

Unlike the brittle OEM cast aluminum cover, our upgraded differential cover is CNC-machined from 6061-T6 billet aluminum, offering a 30% increase in material strength alone. More importantly, a secondary mounting ear has been integrated into the design for added support, drastically improving stability and driveline shock absorption. The secondary mount is tied into the chassis using a reinforced sheet metal bracket and a billet aluminum plate, allowing for bolt-on installation or welding for ultimate rigidity.

Another major flaw of the factory E30 differential cover is its lack of any cooling provisions, leading to overheated fluid and premature wear. Our engineers solved this issue by incorporating advanced cooling features into the design. Large external fins have been added to the cover, and are optimized using CFD (Computational Fluid Dynamics) analysis to efficiently dissipate heat, reducing overall fluid temperatures. By maintaining a more stable differential temperature, this cover ensures consistent performance and extends the lifespan of your differential fluid. A built-in air duct assists in cooling by increasing airflow around the differential, further preventing heat-related failures. Our cover features optional -6AN fittings, allowing for easy integration of an external fluid cooler if desired. Finally, a 1/8 NPT port is included with the kit to ensure compatibility with fluid temperature monitoring systems.

Precision-machined from 6061-T6 billet aluminum and finished with a black hard coat anodizing, this cover is built to withstand hard use. Despite its robust construction and superior durability, this differential cover retains factory mounting features. This means any E30 188mm differential cover bushing can be installed, allowing you to tailor our upgraded cover to your build. The cover also accommodates large rear sway bars, ensuring fitment on cars with upgraded suspension. Our proprietary removable air duct provides easy access to sensor bungs, fill plugs, and drain plugs, making differential service a breeze.

FEATURES

Unmatched Strength & Durability - Heavily reinforced mounting locations are designed to withstand extreme horsepower, torque, and shock load. Secondary Differential Mount - A built-in secondary mount, integral sheet metal bracket, and billet adapter plate make this the strongest E30 differential cover on the market. Bolt-On or Weld-On Installation - The secondary mount is designed for easy bolt-in installation or can be welded to the chassis for ultimate rigidity. Optimized Cooling - Large external fins, designed using CFD analysis, dissipate heat efficiently, reducing overall differential fluid temperatures. Integrated Breather System - An integrated breather system reduces internal cavitation by properly venting built-up pressure. Enhanced Fluid Management - Includes a 1/8 NPT sensor port for real-time fluid temperature monitoring, and optional -6AN fittings for adding an external fluid cooler. Aerodynamic Air Duct - The included aerodynamic air duct further reduces fluid temperatures, increasing fluid service life and reliability. KIT CONTENTS

Dual Mount Differential Cover Assembly Includes the cover, sheet metal mounting bracket, billet aluminum mounting plate, and aerodynamic air duct. Installation Hardware Kit Includes everything you need to install this masterpiece on your E30! Differential Gasket Choose between a Genuine BMW paper gasket or make your own gasket with Loctite 5970. Optional -6AN fittings (2) for adding an external fluid cooler. Differential Cover Bushings Choose between Powerflex, OE MOOG, and Genuine BMW, or add your own (two E30 188mm differential cover bushings required for installation). Gear Oil Choose between Liqui Moly, Redline, and Genuine BMW, or supply your own fluid for reassembly.