Find Parts That Fit Your Vehicle

BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

Suspension Techniques - Corporate Logo
T#:4319905
Part#: 18202208AU
Back Ordered
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping
BC Racing - Corporate Logo
T#:4333551
Part#: I-14-ER-O
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less
Bilstein - Corporate Logo
T#:35256045
Part#: 89-317594
Back Ordered
3% off MSRP $ 4,868.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,716.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 4,868.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,716.99 USD
Free Shipping on orders $49 and up

BMW E36 Bilstein Evo R Front And Rear Suspension Kit is a high-performance coilover system engineered for motorsports enthusiasts seeking superior handling and precision. Designed to excel in extreme track conditions, this kit features 2-way manually adjustable dampers and monoball mounting equipment for enhanced responsiveness. The independent compression and rebound adjustment system offers 100 unique tuning variations, allowing for optimal suspension customization. Adjustable monoball upper mounts (where applicable) provide precise camber adjustments to improve cornering grip and stability. With monotube damper construction and premium components, the Bilstein EVO R delivers consistent, race-proven performance. Hand-built in Germany, this suspension system incorporates advanced technology refined through Bilstein’s Nürburgring racing expertise.

  • 2-way adjustable damping – Independently fine-tune compression and rebound with 100 setting variations
  • Motorsports-grade performance – Engineered for extreme track conditions with precision handling
  • Height and camber adjustability – Customizable suspension setup for improved cornering and stability
  • Monotube damper construction – Delivers consistent, high-performance damping under race conditions
  • German engineering – Hand-built with race-tested technology derived from Nürburgring development
Show More Show Less

Suspension Techniques - Corporate Logo
T#:4319900
Part#: 18202208AG
Back Ordered
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping

KW Suspension - Corporate Logo
T#:50831723
Part#: 152200EX
Ships in 4 Business Days
New Item
$ 3,024.00 USD
Free Shipping
$ 3,024.00 USD
Free Shipping
Customize your damping to perfectly match your specific road conditions and comfort preferences.
KW Suspension - Corporate Logo
T#:11669
Part#: 35220087
Back Ordered
$ 3,744.00 USD
Free Shipping
$ 3,744.00 USD
Free Shipping

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

 

  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 15-40mm lowering; Rear = 10-35mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
  • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars equipped with EDC from the factory must have the system disabled with the optional KW EDC Cancellation Kit.

    Lifetime warranty!




    This item fits the following BMWs:
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

 

Show More Show Less

KW Suspension - Corporate Logo
T#:349085
Part#: 3972020D
Back Ordered
$ 7,054.00 USD
Free Shipping
$ 7,054.00 USD
Free Shipping
KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
Show More Show Less
KW Suspension - Corporate Logo
T#:222775
Part#: 39020005
Back Ordered
$ 4,894.00 USD
Free Shipping
$ 4,894.00 USD
Free Shipping
Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.2 - 2.4" Rear: 1.0 - 2.2"
Show More Show Less

BC Racing - Corporate Logo
T#:4319910
Part#: I-23-RM
Back Ordered
$ 1,495.00 USD
Free Shipping
$ 1,495.00 USD
Free Shipping
BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
Show More Show Less

KW Suspension - Corporate Logo
T#:50731707
Part#: 102200CK
Back Ordered
New Item
$ 2,494.00 USD
Free Shipping
$ 2,494.00 USD
Free Shipping
Perfect for drivers seeking the perfect ride height without the guesswork.
KW Suspension - Corporate Logo
T#:361870
Part#: 15220080
Back Ordered
$ 2,834.00 USD
Free Shipping
$ 2,834.00 USD
Free Shipping

Adjustable Rebound Damping 

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2011+ F10 BMw 528i 535i 550i without EDC
2009+ F01 BMW 740i 740li 750i 750li 
Not for cars with Adaptive Drive.

Show More Show Less
KW Suspension - Corporate Logo
T#:338378
Part#: TMS338378
Back Ordered
Starting at $ 2,684.00 USD
Free Shipping
Starting at $ 2,684.00 USD
Free Shipping
Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive- Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less


    KW Suspension - Corporate Logo
    T#:206137
    Part#: 39020015
    Back Ordered
    $ 4,964.00 USD
    Free Shipping
    $ 4,964.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.0 - 2.0" Rear:1.2 - 2.1"
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:396821
    Part#: 102200BN
    Special Order: No Guaranteed ETA
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features - 

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    This is the ideal coil over kit for a F48 owner who wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC. 

    Lifetime warranty!

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less
    BC Racing - Corporate Logo
    T#:4333544
    Part#: I-03-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:640287
    Part#: 102200DP
    Back Ordered
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:396822
    Part#: 352200BN
    Back Ordered
    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:341653
    Part#: 1522000K
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




  • Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:5001929
    Part#: 1820220850
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    KW Suspension - Corporate Logo
    T#:361418
    Part#: 35220006
    Ships in 4 Business Days
    $ 3,584.00 USD
    Free Shipping
    $ 3,584.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 10-40mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2004-2011 E63 BMW 645ci 650i Coupe
    2004-2011 E64 BMW 645ci 650i Convertible

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:206107
    Part#: 1022000H
    Back Ordered
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:4333502
    Part#: I-10-RM-C
    Back Ordered
    $ 1,495.00 USD
    Free Shipping
    $ 1,495.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731732
    Part#: 102200EY
    Back Ordered
    New Item
    $ 2,494.00 USD
    Free Shipping
    $ 2,494.00 USD
    Free Shipping
    Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.
    KW Suspension - Corporate Logo
    T#:361417
    Part#: 35220005
    Ships in 4 Business Days
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 25-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2004-2010 E60 BMW 525i 528i 530i 535i 545i 550i Sedan
    Not for wagon or all-wheel drive models.

    Show More Show Less


    KW Suspension - Corporate Logo
    T#:50830981
    Part#: 352082000D
    Back Ordered
    New Item
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    The KW V3 Leveling system brings "unadulterated directness" to the BMW F30 and F32 platforms.
    KW Suspension - Corporate Logo
    T#:34650260
    Part#: 152200AG
    Back Ordered
    $ 2,594.00 USD
    $ 2,594.00 USD
    KW Suspension - Corporate Logo
    T#:11666
    Part#: 35220084
    Back Ordered
    $ 4,594.00 USD
    Free Shipping
    $ 4,594.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11562
    Part#: 10220024
    Special Order: No Guaranteed ETA
    $ 1,924.00 USD
    Free Shipping
    $ 1,924.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 35-65mm lowering; Rear = 35-65mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for an E46 Xi owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.




    This item fits the following BMWs:
    2001-2005 E46 BMW 325xi 330xi
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:5282882
    Part#: 102200DL
    Back Ordered
    $ 2,494.00 USD
    Free Shipping
    $ 2,494.00 USD
    Free Shipping
    KW V1 Coilovers offer pre-set dampening and is ideal for customers looking for the best balance between sporty driving with safety and comfort. KW engineers used extensive testing, on and off the track, to determine the optimum level of pre-set dampening to offer the ultimate ride quality with the option of the end user to adjust the ride height. This allows the car to be lowered to a specific height for that performance look without sacrificing ride quality. KW V1 kits offer: Stainless Steel "Inox-Technology" High quality component parts for durability Sport harmonious dampening technology Lowering range approved by the TüV Fully finished complete solutions
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:206108
    Part#: 1522000H
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:362695
    Part#: 35220068
    Back Ordered
    $ 3,434.00 USD
    Free Shipping
    $ 3,434.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11655
    Part#: 35220066
    Back Ordered
    $ 4,034.00 USD
    Free Shipping
    $ 4,034.00 USD
    Free Shipping
    E65 (765); all models (bundle incl. EDC delete unit) KW Coilover Kit V3

    KW Suspension - Corporate Logo
    T#:361416
    Part#: 35220004
    Back Ordered
    $ 3,444.00 USD
    Free Shipping
    $ 3,444.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11677
    Part#: 35220804
    Back Ordered
    $ 4,334.00 USD
    Free Shipping
    $ 4,334.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs - 2 Way Adjustable

    KW Clubsport coilovers was developed for E85 Z4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 20-50mm, Rear - 15-40mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 400 lbs/inch, Rear Progressive.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:338387
    Part#: 35220080X
    Back Ordered
    Starting at $ 4,044.00 USD
    Starting at $ 4,044.00 USD

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

     

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,
    • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

      Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

      Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
      Cars with EDC will require the KW EDC Cancellation Kit (or similar) available from the menu below. Cars without EDC do not need any extra materials.

      Lifetime warranty!

      *Not for cars with Adaptive Drive* 


      This item fits the following BMWs:
      2011+ F10 BMw 528i 535i 550i
      2009+ F01 BMW 740i 740li 750i 750li
      Not for cars with Adaptive Drive.

     

    Show More Show Less
    DS Series Coilover Suspension Kit - F66 MINI Cooper
    Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply
    BC Racing - Corporate Logo
    T#:46924982
    Part#: T-11-DS
    Back Ordered
    $ 1,415.00 USD
    Free Shipping
    $ 1,415.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:349088
    Part#: 3972020E
    Back Ordered
    $ 7,054.00 USD
    Free Shipping
    $ 7,054.00 USD
    Free Shipping
    KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11647
    Part#: 35220049
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 40-80mm lowering; Rear = 30-60mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon

     

    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:31357370
    Part#: 18220850KT
    Back Ordered
    $ 1,649.00 USD
    $ 1,649.00 USD

    MINI R55 R56 R57 ST XTA Performance Coilover System - Adjustable Damping 18220850 offers unmatched driving dynamics with its advanced KW damping technology. This high-performance coilover system allows for precise adjustment of both ride stiffness and comfort, thanks to its externally adjustable damping settings and aluminum uniball top mounts for camber and caster fine-tuning.

    • Latest damping technology for enhanced performance and longevity
    • Reduced system friction for smooth and effective damping adjustments
    • Adjustable lowering within TÜV-tested range: 1.2-2.2" front and rear
    • Front thread adjustment for customized ride height
    • Galvanized coilover struts with additional coating for superior corrosion protection
    • Complete kit includes adjustable spring plate, race springs, and dust-protected bumpers
    • Aluminum adjustable uniball top mounts for precise camber and caster adjustments
    • Externally adjustable damping for on-the-fly changes
    • 5-year limited warranty for peace of mind
    Show More Show Less

    BC Racing - Corporate Logo
    T#:598296
    Part#: I-52-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:597023
    Part#: 102200BP
    Back Ordered
    $ 2,344.00 USD
    Free Shipping
    $ 2,344.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:23416548
    Part#: T-02-DS
    Back Ordered
    $ 1,415.00 USD
    Free Shipping
    $ 1,415.00 USD
    Free Shipping

    BC Racing introduces the DS Series Coilovers, designed to elevate the driving experience for automotive enthusiasts. These coilovers boast a proprietary digressive piston design, delivering heightened damping force at lower speeds, ideal for enthusiasts tackling tracks or navigating winding roads.

    • Utilizes proprietary digressive piston design for enhanced damping force
    • Valved specifically for spring style and rate
    • Features camber plate front mounts and aluminum/rubber rear mounts
    • Offers 30 levels of simultaneous compression and rebound dampening
    • Ideal for track, street, and versatile conditions
    Show More Show Less

    Turner Motorsport - Corporate Logo
    T#:338367
    Part#: TMS198557
    Back Ordered
    Starting at $ 1,690.00 USD
    Free Shipping
    Starting at $ 1,690.00 USD
    Free Shipping

    H&R PCS Street Performance Coil Overs are engineered for the street. Designed for the enthusiast who desires a manual shock damping feature, these state-of-the-art inverted mono-tube dampers feature adjustable ride height and precision external adjustment knobs allowing simultaneous adjustment of rebound and compression damping. The bias between rebound and compression is perfectly balanced and has been designed by H&R engineers to eliminate any undesirable settings and guesswork. Unlike traditional twin-tube shock absorbers, H&Rs mono-tube gas shock absorbers eliminate foaming of the damper oil even under extreme conditions and are lighter weight which reduces un-sprung weight.

    H&R PCS Street Performance Coil Overs for E36 3 series will provide a lowering range of approximately 1.0 to 1.9 inches front and 1.0 to 1.6 inches rear. Lowering your BMW with H&R improves handling and provides that cool H&R stance.

    SPECIAL PRICING FOR A VERY LIMITED TIME! 
    FREE GROUND SHIPPING 

    Height adjustment range:
    F: -1.0-1.9"
    R: -1.0-1.6"

    This coilover kit fits the following BMWs:
    6/1992-1998 E36 BMW 323is 325i 325is 328i 328is

    Show More Show Less
    BC Racing - Corporate Logo
    T#:4333550
    Part#: I-14-ER-C
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4333547
    Part#: I-13-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:349104
    Part#: 3522000T
    Back Ordered
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:4347103
    Part#: I-84-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:341731
    Part#: 1522000T
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less