Front Brake Calipers

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

***Click here for installation instructions*** 

Upgrade your vehicle with power-coated calipers for improved performance and aesthetics. These calipers offer several advantages over stock options. Their powder-coated finish not only enhances their appearance with a bright red color but also makes them much easier to clean. Additionally, they are resistant to rust and corrosion, ensuring long-lasting durability. The eye-catching red color adds a sporty look to your vehicle, making them stand out behind the wheels. These calipers are expertly remanufactured, lubricated, and pressure tested in Chicago, guaranteeing proper functionality from day one. Each set includes the caliper body, caliper carrier, and anti-rattle clip spring.

The caliper sliding bolts are one of the most overlooked wear items in your braking system. Subjected to constant motion and often without adequate lubrication the guide bolts see a lot of wear and tear. Factory BMW caliper guide bolts are very expensive from the dealer - these 304 stainless steel bolts are less than half the price and provide outstanding resistance to corrosion and wear. They are manufacturered with tighter tolerances than the factory bolts too.

Price is per bolt unless noted (2 required per caliper).

Enter your vehicle info for specific fitment information.

The ultimate upgrade when it comes to improving stopping power!

Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.

EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.

This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.

Key Features:

Apollo-Series 6-Piston Calipers

Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs

Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads

Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines

Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid

Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

The ultimate upgrade when it comes to improving stopping power!

Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.

EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.

This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.

Key Features:

Apollo-Series 6-Piston Calipers

Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs

Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads

Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines

Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid

Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

The MINI R50 to R59 Remanufactured RED Color Front Brake Calipers offer a high-performance upgrade for daily driving. These powder-coated calipers not only enhance the aesthetic appeal of your MINI but also provide improved braking performance. Ideal for R50-R53 models, these calipers deliver superior stopping power and a sporty look.

• Powder-Coated Finish: Durable RED color for enhanced appearance.
• Brake Upgrade: Ideal for enhancing braking performance.
• Compatibility Note: For R50-R53 MINIs, note in the door jam or owner’s manual that these are JCW-sized brakes.
• Required Upgrade: For R50-R53 models, upgrade the brake lines to ES#2587905.