Front Control Arm

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1998 - 2004 E39 Touring 525i 528i 540i
1996 - 2004 E39 Sedan 525i 528i 530i 540i 
2000 - 2004 E52 Z8 Roadster

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1999-2006 E46 All Non-M

When replacing your control arms, it's essential to pair them with fresh hardware to ensure a secure and reliable fit. This kit provides all the necessary hardware for the lower control arms on your vehicle, offering peace of mind and optimal performance.

Kit Contents:

(2) Combination Nuts – Part #33306787062 (2) Hex Screws with Collar – Part #31106797237 (2) Self-Locking Nuts – Part #33326760668

Enhance the driving experience of your E90/E92 AWD BMW with the ECS Tuning Performance Coilover System. Specifically designed for daily drivers, these coilovers strike a perfect balance between performance improvement, aesthetic appeal, and comfort. Experience the smoothness of a stock setup while enjoying an aggressive look and significantly enhanced handling, all at an affordable cost.

Key Features:

• Performance Coilover System:
  • Sport-tuned, height, damping, and body adjustable suspension
  • High-quality materials and coatings for optimal performance
  • Perfect ride height for a dynamic appearance
  • Spring Rates: Front 8kg/mm, Rear 12kg/mm

Performance Features:

• 32 levels of rebound damping adjustment
• Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
• Lowered ride height improves handling with a lower center of gravity
• Adjustable front bodies maintain ride height and correct spring pre-load
• Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

Product Design:

• Durable gloss black powder-coated strut and shock bodies
• Clear zinc-coated threaded portions for optimum corrosion protection
• Reflex Silver Metallic powder-coated coil springs for durability
• Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
• Integrated bump stops for added protection

Turner Motorsport Thrust Arm With Pre-installed Monoball Bushings:

Upgrade your front thrust arm bushings with Turner Motorsport's solution for superior durability and performance. This free item is designed to address the common issues associated with OEM rubber bushings, providing nearly instantaneous cornering and braking response.

Features:

• Ball Joint / Monoball:
  • OEM BMW sealed, greased ball joint for exceptional durability
• Housing:
  • 6061-T6 anodized housing for excellent corrosion resistance
  • Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters
• Bearing Inserts:
  • CNC machined 304ss for a precision fit between the ball joint and the subframe
• Performance:
  • Nearly instantaneous, crisp steering and braking response
  • Maintenance-free, long-lasting performance
  • Improved road feel without undesirable NVH

Upgrade your BMW to a track-ready machine while maintaining the comfort needed for spirited driving.

BMW E46 E9X Control Arm - Lower Arm offers a convenient and high-performance solution for those replacing suspension components. Instead of dealing with the time-consuming and potentially challenging task of replacing bushings and ball joints separately, this control arm provides an all-in-one replacement. It comes equipped with market-leading Whiteline synthetic elastomer bushings and high-quality ball joints (where applicable), ensuring durability and superior handling.

• Includes market-leading Whiteline synthetic elastomer bushings for enhanced performance
• Comes with high-quality ball joints (where applicable) for improved reliability
• Provides a complete replacement solution, eliminating the need for separate bushing and ball joint replacement
• Designed to simplify installation and reduce the risk of damage to suspension arms
• Ideal for BMW E46 and E9X models (Note: Does not fit XDrive models)