Burger Motorsports BMW Intake Parts

Burger Motorsports Performance Intake - F48 X1 B46 (Transverse Mounte...

Not for sale or use in the state of California.

T#:556810

Part#: BMS-B46-INT

Ships in 2 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B48/46 Engine (Transversally mounted BMW / MINI engine, intake on the right)**

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - BMW F-Chassis 23...

Not for sale or use in the state of California.

T#:556807

Part#: BMS-B48-INT

Ships on Oct 20, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug and play air intake system unlocks up to 8whp to the wheels from your B48 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look and includes a reusable S&B high flow filter. The OEM cold air intake tube and insulating base remain fully functional. Install takes only minutes and is fully reversible. Made in USA. Features & Benefits Adds up to 8+ wheel horsepower Dramatic sound improvement Improves throttle response Huge 3.5" inlet Retains OEM cold air ducting Looks great under the hood Renewable air filters Made in the USA What's included: (1) Billet MAF Housing (1) Renewable 1123 inverted cone filter w/clamp (1) Billet bracket (2) 6/32 x 3/8" internal hex socket cap MAF screws (1) 10-32 x 5/8" internal hex socket cap bracket screw (1) bracket screw washer

Show More Show Less

BMS Elite Performance Intake with Blue Filters - G80/G82 M3/M4 ...

T#:3886580

Part#: G8X-ELT-INTK-B

Ships on Oct 20, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

BMS Drop-In Performance Air Filters - S58

T#:38621427

Part#: BMS-DAF-S58

Ships on Oct 20, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805

Show More Show Less

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

T#:16175682

Part#: BMSS55INT

Ships on Oct 20, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

BMS Intake Muffler Delete

T#:20782228

Part#: BMSG42IMD

Ships on Oct 19, 2026

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

Easily delete the bulky factory intake muffler (resonator) for better sound and cleaner looks under the hood. The BMS intake muffler deletes are CNC machined from a solid block of lightweight billet aluminum and are available in anodized black, blue, or red. This also allows room for a BMS catch can setup!

Show More Show Less

BMS G20 B58 Billet Intake

T#:597207

Part#: G20-B58-BIT

Ships on Oct 20, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

Show More Show Less

BMS High Flow Silicone Inlets - 2" Opening For Hybrid Turbos - BMW N5...

T#:14684349

Part#: N54HFSILINLETS

Ships on Oct 20, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

These high-quality BMS N54 silicone inlets replace your flimsy and restrictive plastic N54 BMW inlets reducing restriction and dramatically improving airflow, top-end boost, and performance. Includes all required hardware and is compatible with both factory-style diverter valves and blow-off valve kits. Available in 1.75" inlets for factory turbos or 2" inlets for hybrid and aftermarket turbos. Compatible with BMS DCI and all other N54 intake systems. FEATURES AND BENEFITS Huge 30-50whp top-end power gains Replaces your restrictive factory intake system Retains OEM engine bay look Durable high-temperature reinforced silicone for long life Compatible with both RHD and LHD vehicles Includes required hardware

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe - N54

Not for sale or use in the state of California.

T#:556770

Part#: BMS-N54-CP-OEDV

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe w/ Tial BOV Flange - N...

Not for sale or use in the state of California.

T#:556771

Part#: BMS-N54-CP-BOVF

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.

In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
Tial BOV Flange
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

Burger Motorsport Performance Intercooler - N20 N55 - Stepped Core ...

T#:556817

Part#: BMS-F-N55N20INTC

In Stock

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

Looking to upgrade your intercooler? This Burger Motorsport intercooler is a great option that delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. A larger core and increased surface area dramatically improves cooling and reduces pressure drop. After extensive testing, this can allow your N20/55 powered BMW to gain around 10+peak wheel horsepower and during longer pulls and multiple runs, as much as 20-30whp over the factory intercooler. BMS replacement intercoolers are a direct replacement for your factory intercooler and are fully reversible. All required hardware is included. Dimensions: 21" x 6" first step x 2.5" 2nd step x 5" *Not for sale or use in the state of California.

Show More Show Less

BMS Elite Intake With Turbo Inlet - F Chassis B58 - Red

T#:38789912

Part#: ELITEB58INTAKER

Back Ordered

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

### **BMS Elite B58 Performance Intake – Superior Flow & Power** The **BMS Elite B58 Performance Intake** enhances airflow while preserving the best aspects of the OEM system, including **cold air ducting** and the **lightweight heat-shielded airbox base**. It upgrades the top section with **larger, high-flow ducting**, a **heatshield**, and a **premium BMS inverted cone air filter** for maximum performance. Available as a **standalone intake** or bundled with the **B58 Turbo Inlet** to maintain **consistent high airflow** all the way to the turbo. ### **Proven Performance Gains** 📈 **Dyno-tested** – Adds up to **10+ horsepower to the wheels at 25+ psi** ⚡ **Faster Turbo Spool** – Improved throttle response & enhanced performance 🔊 **Enhanced Sound** – Hear your **turbo spool** like never before! ### **Key Features:** ✅ **Increases horsepower & throttle response** ✅ **Outflows stock intake for better performance** ✅ **Includes an upper heat shield & retains OEM airbox base** ✅ **Keeps factory cold air ducting for optimal efficiency** ✅ **Premium cleanable & reusable air filter** – lasts the **lifetime of your car** ✅ **Quick, easy, and fully reversible installation** 🔧 **Made in the USA. Built for Power. Designed for Enthusiasts.** 🔥

Show More Show Less

BMS Turbo Inlet Upgrade - F Chassis B58

T#:5108987

Part#: B58FTURBINLET

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

The Burger Motorsports upgraded turbo inlet pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions creating more power and better turbo efficiency. The Burger Motorsports turbo Inlet pipe is a direct replacement for the plastic restrictive OEM unit.

Show More Show Less

BMS Elite Front Mount Intake - F Chassis B58

T#:5108986

Part#: FB58FRONTMOUNT

Ships on Oct 20, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

Replacement Intake Coupler - Priced Each

Not for sale or use in the state of California.

T#:583384

Part#: INTAKECOUPLER

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

BMS B46/B48 Billet Intake For BMW

T#:35019968

Part#: BMSB46B48BINTAKE

In Stock

$ 229.99

This product was last offered at the strikethrough price on
06-12-2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.

MINI BMS Billet Intake For 2014+ B36/B38/B46/B48 - PRE LCI

Not for sale or use in the state of California.

T#:557781

Part#: MINIBMSINTAKE

Ships in 2 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Intake - S63tu M5/M6 - Red Filters

T#:38857245

Part#: BMS-INTAKE-F10R

Ships on Oct 20, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Red Filter - BMW G2X G42 G...

T#:46959270

Part#: B58GFMCAI-R

Ships on Oct 20, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMS Drop-In Performance Air Filters - BMW G2X G4X Gen2 B48/B58 ...

T#:46993569

Part#: G2B48B58DIAF

Ships on Oct 20, 2026

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

The Burger Motorsports performance B48/B58 G Chassis BMW drop-in air filter is OE quality and features layered, oiled cotton media engineered to improve airflow, capture contaminants, and increase horsepower. Each Burger Motorsports performance air filter is washable, reusable, and will last the entire life of your vehicle. Installs easily into your factory airbox. Replaces air filter OEM BMW part numbers 13718635102 or 13718580428

Show More Show Less

N54 Phoenix Racing BMW Front Facing Port Injection Manifold

T#:40072449

Part#: N54PHOENIXPORTIN

Ships on Oct 20, 2026

$ 649.00 USD

Add to Wish List

Qty

$ 649.00 USD

Add to Wish List

Manifold only!

BMS B46/B48 Billet Intake - Dry Filter

T#:54852049

Part#: BMSB46B48BDI

Ships on Oct 20, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Billet intake with low-maintenance dry filter eliminates B48 induction restriction.

BMS Elite Front Mount Intake - F Chassis B58 - Red

T#:38789908

Part#: FB58FRONTMOUNTR

Ships on Oct 20, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks. In addition to freeing up power, turbo spool speed is greatly improved and there's an incredible sound improvement. You'll finally be able to hear your turbos spooling! The proprietary high flow inverted cone filters can be cleaned every 15-20k miles using a cleaning kit and will last the life of the car. FEATURES AND BENEFITS Adds up to 12+ Horsepower Dramatic sound improvement Unique look Improves throttle response Huge 3.5" mandrel-bent aluminum tubing Classy gloss black powder coat finish CNC Billet aluminum fittings Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

BMS Front Mount Performance Silicone Intake - Blue Filters

T#:41255920

Part#: S58FMSILINT-BLU

Ships on Oct 20, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Elevate the capabilities of your G8x or F9x S58-powered BMW with an intake system engineered to true motorsport standards. The BMS Front-Mount Performance Intake completely eliminates the restrictive OEM induction setup, replacing it with a continuous 3.5" high-flow tract designed for maximum volumetric efficiency.

Show More Show Less

BMS Replacement Intercooler For E Chassis BMW

T#:38621402

Part#: BMS-INTCLR-N5455

Ships on Oct 20, 2026

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

The BMS N54/N55 Replacement E-Chassis Intercooler Upgrade for BMW improves cooling efficiency, boosts wheel horsepower, and maintains performance during extended driving sessions. With a larger core and expanded surface area compared to the stock intercooler, it reduces pressure drop and significantly enhances cooling capacity. Expect peak gains of around 10whp, with sustained increases of 20-30whp during long pulls or repeated runs versus the factory intercooler. This E-Chassis upgrade is ideal for setups up to 500whp, while the 7.5" RACE intercooler supports builds reaching 1000whp. Designed as a direct-fit replacement, the BMS intercooler is fully reversible and requires no additional hardware for installation. E-Chassis BMW FMIC Dimensions: 20" x 5.25" x 5.25".

Show More Show Less

Phoenix Racing Port Injection Intake Manifold With 750cc Injectors An...

T#:47644944

Part#: N55PIIMINJECT

In Stock

$ 1,038.00 USD

Add to Wish List

Qty

$ 1,038.00 USD

Add to Wish List

Burger Motorsports' N55 High-Flow Aluminum Intake Manifold is an upgrade designed to replace the factory plastic intake manifold, enhancing both durability and performance for BMW N55 engines. Built from high-strength, lightweight aluminum, this manifold supports high flow rates and integrates top-mount port injection bungs for optimized fuel delivery and injector spray patterns. The manifold also features additional expansion vacuum ports, making it ideal for connecting larger blow-off valves, gauges, Hobb’s switches, and more.

Show More Show Less

BMS Competition Cold Air Intake - Dry Filter - BMW G42 G20 G22/23/26 ...

T#:46924987

Part#: G2B58BMSINT-D

Ships on Oct 20, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

Burger Motorsports S58 Port Injection Intake Manifold And Intercooler...

T#:46993579

Part#: BMSS58PIIM

Ships on Oct 19, 2026

Starting at $ 2,499.00 USD

Add to Wish List

Starting at $ 2,499.00 USD

Add to Wish List

When it comes to S58 intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your factory plastic S58 manifold and intercooler with a direct-fit, high-flow, high-strength aluminum manifold. The intercooler core is double the size of the factory unit, and the manifold features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern. Includes high-quality o-rings and all required hardware. The BMS manifold has approximately 76.1% more internal volume than the OEM manifold

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Blue Filter - BMW G2X G42 ...

T#:46959269

Part#: B58GFMCAI-B

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMS Competition Cold Air Intake - Red Oiled Filter - BMW G42 G20 G22/...

T#:46924986

Part#: G2B58BMSINT-R

Ships on Oct 20, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

BMW 5bar Sensor - B58/S58

T#:49822565

Part#: BMSB585BS

Ships on Oct 20, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

Buger Motorsports 700HP Package - Blue Filters - BMW G8X S58 ...

T#:41255925

Part#: S58700HP-BLUKT

Back Ordered

$ 2,075.99

This product was last offered at the strikethrough price on
05-23-2026

$ 2,066.00 USD

Add to Wish List

Qty

$ 2,066.00 USD

Add to Wish List

Unleash 700+ HP with safe, proven JB4 tuning on your locked ECU while maintaining reliability and drivability. This package delivers maximum power, optimized airflow, and real-time performance monitoring—all with easy plug-and-play installation and no permanent modifications.

Show More Show Less

Burger Motorsports Competition Cold Air Intake - Blue Oiled Filter - ...

T#:37689739

Part#: BMSB48INTKB

In Stock

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - F22 F87 2 Series...

For vehicles equipped with a manual transmission only

T#:24677026

Part#: BMSF3XN55INTREDM

Ships on Oct 20, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling! Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway! Features: Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Looks great under the hood Cleanable and reusable filter Made in the USA *Not for sale or use in the state of California.

Show More Show Less

Burger Motorsports Competition Cold Air Intake - Red Oiled Filter - B...

T#:37689740

Part#: BMSB48INTKR

Ships on Oct 20, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.

Show More Show Less

BMS Competition Cold Air Intake - Red Oiled Filter - BMW G20 G22/23/2...

T#:46924962

Part#: G3B58BMSINT-R

Ships on Oct 20, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

BMS Elite Intake - F Chassis B58

T#:5108984

Part#: ELITEB58INTAKE

Ships on Oct 20, 2026

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

The BMS Elite B58 Performance Intake outflows the OEM intake but retains everything that's good including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with larger higher flow ducting, a heatshield, and a quality BMS inverted cone air filter to match. Available alone or packaged with the B58 Turbo inlet maintaining that same high level of flow all the way to the turbo.

Show More Show Less

BMS B46/B48 Billet Intake - Red

T#:54852048

Part#: BMSB46B48BRI

Ships on Oct 20, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.

Phoenix Racing Port Injection Intake Manifold - BMW N54

T#:40072445

Part#: N54PHOENIXPIMAN

Ships on Oct 20, 2026

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

Comes with 950cc injectors!

Burger Motorsports Aluminum Chargepipes - S63TU M5 M6

Not for sale or use in the state of California.

T#:556806

Part#: BMS-F-M5-ACP

Ships on Oct 20, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Though functionally identical to the stock plastic pipes, these Burger Motorsports chargepipes are an improvement in both reliability and versatility. This is due to their black gloss powder coated aluminum construction, giving them greater strength and a better appearance, and the inclusion of a 1/8" NPT bung & cap included in each pipe.

Show More Show Less

CANbus Flex Fuel Kit - Complete Kit W/ CABbus ECA & Universal Harness...

T#:49613450

Part#: G8XS58CANFFUH

Ships on Oct 20, 2026

$ 479.99

This product was last offered at the strikethrough price on
05-22-2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

BMS Elite Intake - Blue Filters - F90 M5 F9X M8

T#:12413843

Part#: F9XS63BLUE

Ships on Oct 20, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Blue Filter Variant. Includes all required hardware. It does NOT require any cutting or drilling. While the factory intake is very high flowing the BMS Elite intake provides power gains of up to 10whp range at 25psi+ boost levels. Sound and turbo spool-up speed are also improved. Made in the USA.

Show More Show Less

BMS Competition Cold Air Intake - Dry Filter - BMW G20 G22/23/26 Gen3...

T#:46924963

Part#: G3B58BMSINT-D

Ships on Oct 20, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

BMS Drop-In Performance Air Filter - B48/58 G Chassis

T#:38621411

Part#: BMW-DIPAF-B4858

Ships on Oct 20, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter exceeds OE quality, utilizing layered, oiled cotton media for optimal airflow, effective contaminant filtration, and increased horsepower. This high-performance filter is washable, reusable, and designed to last the lifetime of your vehicle. With a simple drop-in installation, it seamlessly fits into your factory airbox. Replaces OEM BMW air filter part number: 13718577170.

Show More Show Less

Burger Motorsports N54 N55 7.5" High Density RACE Intercooler - BMSEC...

T#:58818980

Part#: BMSEC75INTERCOOL

Ships on Oct 20, 2026

$ 529.00 USD

Add to Wish List

Qty

$ 529.00 USD

Add to Wish List

A 7.5" high-density RACE intercooler for N54 and N55 E chassis cars. It delivers better cooling and more power, especially for upgraded turbo builds, and is rated for over 1000whp.

Burger Motorsports B46/B48 Billet Performance Intake System - Red Fil...

T#:46993583

Part#: BMS-G-INT-R

Ships on Oct 20, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug-and-play air intake system unlocks up to 8whp to the wheels from your B46/B48/B58 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for strength and a clean look. Includes a reusable high-flow inverted cone filter. The OEM cold air intake tube and insulating base remain fully functional. Installation takes only minutes and is fully reversible.

Show More Show Less

BMS Drop-In Performance Air Filters - S63/68

T#:38688928

Part#: BMS-DAF-S6368

Ships on Oct 20, 2026

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Burger Motorsports Performance S63/S68 BMW X5, X5M, X7, and XM Drop-In Air Filters exceed OE standards, utilizing layered, oiled cotton media that maximizes airflow while effectively trapping contaminants and increasing horsepower. These high-performance filters are washable, reusable, and engineered to last the life of your vehicle. Easy to install, they fit directly into your factory airboxes for a quick upgrade.

Show More Show Less

BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6

T#:49752784

Part#: BMSS63TURACP

Ships on Oct 20, 2026

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

When you’re turning up the boost on your F-Chassis M5 or M6, the factory plastic charge pipes become a known weak link. The BMS Elite Replacement Aluminum Charge Pipes eliminate that failure point with a properly engineered, motorsport-grade solution built for the S63TU twin-turbo V8. Developed by Burger Motorsports specifically for the F10 M5 and F12/F13 M6, these mandrel-bent aluminum charge pipes provide a smooth, unrestricted airflow path from the turbos to the intercoolers, improving throttle response and maintaining consistent boost under load. More importantly, they’re built to survive where the OEM plastic pipes crack, split, and blow apart — especially on tuned or hard-driven cars. CNC-machined flanges, bead-rolled ends, and high-quality silicone couplers ensure a leak-free, secure connection, while all factory sensor ports and mounting locations are retained for a true bolt-on installation. No cutting, no tuning, no compromises — just a clean, OEM-plus upgrade that delivers the reliability your S63TU needs for street, track, and everything in between.

Show More Show Less

Burger Motorsports Competition Cold Air Intake - White Dry Filter - B...

T#:46959268

Part#: BMSB48INTKD

Ships on Oct 20, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.

Show More Show Less

Project Cars

SELECT YOUR BMW

Burger Motorsports BMW Intake Parts

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results