Burger Motorsports BMW Intake Parts

BMS Elite Dual Intakes - Blue Oiled Filters - 2025+ BMW G90 G99 M5 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924991

Part#: G90ELINT-B

Ships on Jul 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Replace your restrictive factory intake with this Burger Motorsport Elite Dual Intake system for increased airflow to the turbos. Includes all required hardware. No cutting, drilling, or permanent modifications required. The BMS Elite Intake provides up to 10whp gains at 25psi+ boost levels. Sound and turbo spool-up speed are also improved.

Show More Show Less

BMS Competition Cold Air Intake - Red Oiled Filter - BMW G20 G22/23/2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924962

Part#: G3B58BMSINT-R

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

BMS Elite Dual Intakes - Dry Performance Filters - 2025+ G90 G99 BMW ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924993

Part#: G90ELINT-D

Ships on Jul 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Replace your restrictive factory intake with this Burger Motorsport Elite Dual Intake system for increased airflow to the turbos. Includes all required hardware. No cutting, drilling, or permanent modifications required. The BMS Elite Intake provides up to 10whp gains at 25psi+ boost levels. Sound and turbo spool-up speed are also improved.

Show More Show Less

BMS Silicone Intake Pipe Hose Upgrade - BMW Gen3 B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Factory Intakes & Gen 3 B58

T#:46959252

Part#: B58G3INTP

Ships on Jul 28, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports silicone intake pipe upgrade for the Gen 3 B58 BMW engine smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

BMS Elite Dual Intakes - Red Oiled Filters - 2025+ BMW G90 G99 M5 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924992

Part#: G90ELINT-R

Ships on Jul 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Replace your restrictive factory intake with this Burger Motorsport Elite Dual Intake system for increased airflow to the turbos. Includes all required hardware. No cutting, drilling, or permanent modifications required. The BMS Elite Intake provides up to 10whp gains at 25psi+ boost levels. Sound and turbo spool-up speed are also improved.

Show More Show Less

BMS Heat Exchanger Upgrade - G-Chassis B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5095728

Part#: GCHASB58HEATEXCH

Ships on Jul 28, 2026

$ 480.00 USD

Add to Wish List

Qty

$ 480.00 USD

Add to Wish List

This heat exchanger upgrade is a high-quality replacement that dramatically lowers engine oil and water temperatures by providing a 50% larger cooling surface than OEM. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Direct bolt-in installation.

Show More Show Less

Billet Intake For B58 - Z4/ Supra

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857221

Part#: BMS-B58BI-B

Ships on Jul 28, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock up to 8whp with this plug-and-play air intake system, designed to enhance power, throttle response, and turbo spool while delivering an aggressive turbo sound under acceleration. Crafted from CNC-machined billet aluminum and anodized black for a sleek finish, this intake features a reusable S&B high-flow inverted cone filter for maximum airflow. The OEM cold air intake tube remains fully functional, ensuring optimal efficiency. Key Features & Benefits: ✅ Adds up to 8whp for increased performance ✅ Enhances throttle response & turbo spool ✅ Dramatic sound improvement – hear your turbo spool up ✅ High-quality CNC-machined billet aluminum construction ✅ Sleek black anodized finish for a clean look ✅ Reusable S&B high-flow inverted cone filter ✅ Quick & fully reversible installation in minutes 🔧 Made in the USA – Built for Performance Enthusiasts! 🔥

Show More Show Less

Phoenix Racing Port Injection Intake Manifold - BMW N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40072445

Part#: N54PHOENIXPIMAN

Ships on Jul 28, 2026

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

Comes with 950cc injectors!

BMW N54 BOV Vaccuum Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589530

Part#: N54BOVVACADPT

Ships on Jul 28, 2026

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

BMS Elite Performance Intake - Flat Black W/ Blue Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39633149

Part#: G8XELTINFBBF

Ships on Jul 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

BMS Elite Performance Front Mount Intake - Red - G8X S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12413839

Part#: S58FMINTAKERED

Ships on Jul 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Red Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Gen 1 B58 BMW Aluminum Port Injection Manifold

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171924

Part#: BMSB58G1-PRM

Ships in 8 Business Days

Starting at $ 3,158.00 USD

Add to Wish List

Starting at $ 3,158.00 USD

Add to Wish List

Add more fuel via port Injection while increasing airflow in your Gen 1 B58 Powered BMW When it comes to intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your weak factory plastic B58 manifold with a direct fit high flow high strength aluminum manifold. Features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion vacuum ports perfect for gauges, BOV references, or Hobbs switches. Includes high-quality o-rings and all required hardware. Your factory high-quality intercooler core slides right in. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or ala-cart without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options. For most 700-800whp applications we suggest the 750cc injectors, while the 550cc injectors are suitable for applications below 700whp. This kit includes a FREE $99.00 Burger Motorsports B58 Phenolic Thermal Intake Manifold Spacer FEATURES AND BENEFITS Increased flow Integrated top mount port injection bungs Much stronger than stock Looks amazing under the hood Lightweight aluminum construction All factory connections Extra ports for a BOV, Hobb's switch, or boost gauge Includes upgraded high-temperature o-rings Optional Motiv Reflex + Injector Controller Optional Injector Block Off Plugs Optional Deasthwerks 1000cc Injectors

Show More Show Less

BMS Elite Performance Front Mount Intake - Blue - G8X S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12413838

Part#: S58FMINTAKEBLUE

Back Ordered

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Blue Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:44258354

Part#: BMW-N54PORT-750

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 3 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

JB4 Universal Water/Methanol Injection Kit & Stainless Steel Braided ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26271799

Part#: WMIK-UNI-12S3

In Stock

$ 810.00 USD

Add to Wish List

Qty

$ 810.00 USD

Add to Wish List

Upgrade your BMW with the JB4 Universal Water/Methanol Injection (WMI) Kit, a versatile solution designed to enhance both power and reliability. Engineered to seamlessly integrate with a variety of vehicles, this innovative kit offers a universal solution for enthusiasts seeking optimized performance and engine protection.

Enhanced Performance: Boost engine power and torque for an exhilarating driving experience.
Engine Protection: Safeguard your engine from potential damage with precise injection of water and methanol, reducing temperatures and preventing harmful detonation.
Improved Fuel Economy: Promote more efficient combustion, leading to better fuel economy and reduced emissions.
Easy Installation: With its universal design, installation is hassle-free, providing a convenient upgrade solution for a wide range of vehicles.
Advanced Technology: Equipped with adjustable injection rates and integrated safety mechanisms, ensuring optimal performance and reliability.

Upgrade your BMW's performance with the JB4 Universal Water/Methanol Injection Kit and enjoy the perfect blend of power, efficiency, and engine protection.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744064

Part#: GEN1B58WIS

Ships on Jul 28, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

3 Gallon F3x/F8x Stealth Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558169

Part#: 3G-STMT-F3XF8X

Ships on Jul 28, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 28, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 28, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Kit - S63TU F9x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308435

Part#: WMIK-S63TU

Ships on Jul 28, 2026

Starting at $ 809.00 USD

Add to Wish List

Starting at $ 809.00 USD

Add to Wish List

Water/Methanol/Alcohol injection commonly referred to as WMI allows you to make tremendous amounts of power on pump gas. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone. The key to a safe and effective WMI setup is tuning integration. The BMS S63TU F90 BMW M5/M6 WMI kit integrates into the JB4 tuning system allowing for precise mapping based on boost, throttle position, engine speed, intake temperature, advance, gear, and other data elements available to the JB4 through its CANbus system. In addition, a pump flow signal is fed back to the JB4 allowing for a safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid detonation. Boost is held low until WMI is properly flowing to avoid tip in knock common with non-integrated WMI setups. In addition, WMI can be activated or disabled right from the JB4 Mobile app , will automatically disengage during traction control or safety map situations, and WMI flow data can be displayed via your JB4 Mobile logging device. We suggest and include dual BM7 nozzles. 1 Gallon Kit contains: WMI Pump WMI solenoid & filter assembly JB4 FSB module for control and tuning integration F90 plug and play nozzle adapters Two BM7 nozzles Compression fittings for nozzles, solenoid, tee, & filter 1 gallon tank, black cap, and fittings 15' of WMI fluid line 15' black and red wiring 10 amp fuse Grounding forks for FSB, pump, and power splice 2 Gallon Kit contains: WMI Pump WMI solenoid & filter assembly JB4 FSB module for control and tuning integration F90 plug and play nozzle adapters Two BM7 nozzles Compression fittings for nozzles, solenoid, tee, & filter 2 gallon tank, black cap, and fittings 15' of WMI fluid line 15' black and red wiring 10 amp fuse Grounding forks for FSB, pump, and power splice

Show More Show Less

BMS Water/Methanol Port Injection (WMI) Kit - S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308440

Part#: WMIK-S58

Ships on Jul 28, 2026

Starting at $ 1,899.00 USD

Add to Wish List

Starting at $ 1,899.00 USD

Add to Wish List

The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay (1) 15' of red power wire (1) 15' of black power wire 3.5 Gallon Tank: What's included: (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

BMS Water/Methanol Injection (WMI) Kit - Gen 2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308437

Part#: WMIK-B58G2

Ships on Jul 28, 2026

Starting at $ 799.00 USD

Add to Wish List

Starting at $ 799.00 USD

Add to Wish List

Make tremendous amounts of power on pump gas! Everything you need to get started with WMI in one convenient kit. JB4 compatible! Water/Methanol/Alcohol injection commonly referred to as WMI allows you to make tremendous amounts of power on pump gas. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone. For those that don't have easy E85 access WMI adds a on of power over pump gas, and for those running E85 WMI can still be very useful for its charge air cooling and fuel volume benefits. The key to a safe and effective WMI setup is tuning integration. The B58 BMS WMI kit integrates to the JB4 tuning system allowing for precise mapping based on boost, throttle position, engine speed, intake temperature, advance, gear, and other data elements available to the JB4 through its CANbus system. In addition, a pump flow signal is fed back to the JB4 allowing for a safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid detonation. Boost is held low until WMI is properly flowing to avoid tip in knock common with non-integrated WMI setups. In addition WMI can be activated or disabled right from the JB4 Mobile app and will automatically disengage during traction control or safety map situations. WMI flow data can be displayed via your JB4 Mobile logging device. This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap, a compression pump feed fitting, and 12" of vinyl WMI line for the non-pressure side of the WMI pump. This kit includes a BM10 (10 GPH or approx. 750 ml/min) injection nozzle suitable for most B58 applications. Mounting requires an 1/8" NPT port or the throttle plate adapter. What's included (1) G20 Stealth Tank and Mounting Hardware (1) FSB JB4 Water/Methanol Injection Controller (1) BMS water/methanol Injection pump (1) BM10 Water/Methanol Nozzle (1) 12.5' of steel braided hose (straight and 90º fitting) (1) 2' of steel braided hose (straight and 90º fitting) (1) 18" of PTFE line (tank to pump) (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Solenoid (1) 15' (-) Negative black wire (1) 15' (+) Positive red wire (7) wire wire nuts (1) inline fuse holder

Show More Show Less

FSB WMI Controller - v1 N54 JB4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176922

Part#: FSB-N54

Ships on Jul 28, 2026

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

The BMS JB4 FSB Water/Methanol Injection (WMI) controller allows the JB4 to control your WMI pump and solenoid for dynamic progressive flow mapping. It also allows the JB4 to monitor pump current to overlay it with CANbus feedback for tuning parameters such as fuel trims and fuel pressure to provide a comprehensive flow-based safety system.

Show More Show Less

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176934

Part#: BMS-WMI-SOL

Ships on Jul 28, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

F9x M5/M8 WMI Nozzle Adapters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176941

Part#: BMS-WMI-F9XAD

Ships on Jul 28, 2026

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

These plug and play WMI nozzle adapters allow you to cleanly install a WMI kit on your F9x BMW M5/M8 without having to disassemble or drill/tap the factory charge pipes. They retain the factory boost cross over and include all required hardware. Does not include WMI nozzles. Made in the USA.

Show More Show Less

Billet Water/Methanol Injection (WMI) Spacer - Gen 2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20782258

Part#: BMSB58WMISPG2

Ships on Jul 28, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Normally you'd replace the factory charge pipe to install a water/methanol kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug and play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/methanol applications we suggest dual CM5 nozzles.

Show More Show Less

2 Gallon Stealth Tank F10

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558168

Part#: 2G-STMT-F10

Ships on Jul 28, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

A clean, stealth installation providing peace of mind and making no compromises. This completely custom design fits cleanly within the existing trunk cavity in your F10 BMW for the ultimate ease of installation. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick and clean installation. The bottom of the tank includes a sump and baffle allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Pump mounts directly to the tank Works with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Bolts to an existing point in the vehicle Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 16.5" x W 6.5" x H 8.25"

Show More Show Less

WMI Inline Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176933

Part#: BMS-WMI-FIL

Ships on Jul 28, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS 3.5 Gallon Stealth Water/Methanol Injection (WMI) Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815187

Part#: BMW35G28

Ships on Jul 28, 2026

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

Safe, sleek, and ready to install out of the box! Your choice of color and accessories! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank (pump sold separately) Tank dimensions: L 20.5" x W 11" X H 13.5" What's included: (1) Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (2) 1/4 push male to female 90º to pump in (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Aug 10, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

Burger Motorsports BMW Intake Parts

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results