Burger Motorsports BMW Intake Parts

BMS Billet Intake For B58 - Z4/ Supra - Red

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857229

Part#: BMS-B58BI-R

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock up to 8whp with this plug-and-play air intake system, designed to enhance power, throttle response, and turbo spool while delivering an aggressive turbo sound under acceleration. Crafted from CNC-machined billet aluminum and anodized black for a sleek finish, this intake features a reusable S&B high-flow inverted cone filter for maximum airflow. The OEM cold air intake tube remains fully functional, ensuring optimal efficiency. Key Features & Benefits: ✅ Adds up to 8whp for increased performance ✅ Enhances throttle response & turbo spool ✅ Dramatic sound improvement – hear your turbo spool up ✅ High-quality CNC-machined billet aluminum construction ✅ Sleek black anodized finish for a clean look ✅ Reusable S&B high-flow inverted cone filter ✅ Quick & fully reversible installation in minutes 🔧 Made in the USA – Built for Performance Enthusiasts! 🔥

Show More Show Less

Burger Motorsports Billet Intake - A90 Supra G29 Z4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588195

Part#: BMSA90INF

Ships on Jul 28, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5788180

Part#: BMS-F-S55HE

Ships on Jul 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:556787

Part#: BMS-S55-INT

Ships on Jul 28, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Show More Show Less

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16175682

Part#: BMSS55INT

Ships on Jul 28, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

BMS Elite Performance Intake With Red Filters - G80/G82 M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3943329

Part#: G8X-ELT-INTK-R

Ships on Jul 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

BMS G20 B58 Billet Intake

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:597207

Part#: G20-B58-BIT

Ships on Jul 28, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

Show More Show Less

BMS Aluminum Performance Upper Chargepipe - N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:556773

Part#: BMS-N55-CP

Ships in 7 Business Days

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Tired of your factory plastic charge pipe blowing off or ripping apart under boost? Upgrade your flimsy OEM unit to our heavy-duty aluminum replacement for 1/3 of the price of the factory unit. Designed by Burger Motorsports and manufactured overseas our replacement charge pipe features all aluminum construction, high-quality matte black finish, CNC machined flanges, OEM style mounting hardware for a direct fit, and a lifetime warranty. Because we use the OEM mounting system, unlike other charge pipe solutions, this charge pipe installs in minutes, retains all emissions fittings, and is 100% reversible. Includes two 1/8" NPT bungs with optimal 180-degree placement. Lifetime warranty. Installation requires charge pipe gaskets and charge pipe clips to be transferred over from the removed factory charge pipe. Replaces OEM BMW Charge-Air Duct part #13717615026 What's Included (1) BMS Aluminum Replacement Charge Pipe (1) Heavy-duty silicone coupler (2) Heavy-duty clamps (2) 1/8 NPT bung plugs

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe w/ Tial BOV Flange - N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:556771

Part#: BMS-N54-CP-BOVF

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.

In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
Tial BOV Flange
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:556770

Part#: BMS-N54-CP-OEDV

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

BMS Drop-In Performance Air Filter - B48/B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857248

Part#: BMSIDIPAFB4858

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter outperforms OE quality with its layered, oiled cotton media, engineered for maximum airflow, effective contaminant filtration, and increased horsepower. This washable, reusable filter is designed to last the lifetime of your vehicle, providing a cost-effective, high-performance upgrade. With a quick and easy installation, it fits directly into the factory airbox for a seamless upgrade. Replaces OEM BMW Air Filter Part #13718577170

Show More Show Less

BMS Elite Front Mount Intake - F Chassis B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5108986

Part#: FB58FRONTMOUNT

Back Ordered

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Elite Intake With Turbo Inlet - F Chassis B58 - Red

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38789912

Part#: ELITEB58INTAKER

Back Ordered

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

### **BMS Elite B58 Performance Intake – Superior Flow & Power** The **BMS Elite B58 Performance Intake** enhances airflow while preserving the best aspects of the OEM system, including **cold air ducting** and the **lightweight heat-shielded airbox base**. It upgrades the top section with **larger, high-flow ducting**, a **heatshield**, and a **premium BMS inverted cone air filter** for maximum performance. Available as a **standalone intake** or bundled with the **B58 Turbo Inlet** to maintain **consistent high airflow** all the way to the turbo. ### **Proven Performance Gains** 📈 **Dyno-tested** – Adds up to **10+ horsepower to the wheels at 25+ psi** ⚡ **Faster Turbo Spool** – Improved throttle response & enhanced performance 🔊 **Enhanced Sound** – Hear your **turbo spool** like never before! ### **Key Features:** ✅ **Increases horsepower & throttle response** ✅ **Outflows stock intake for better performance** ✅ **Includes an upper heat shield & retains OEM airbox base** ✅ **Keeps factory cold air ducting for optimal efficiency** ✅ **Premium cleanable & reusable air filter** – lasts the **lifetime of your car** ✅ **Quick, easy, and fully reversible installation** 🔧 **Made in the USA. Built for Power. Designed for Enthusiasts.** 🔥

Show More Show Less

BMS Turbo Inlet Upgrade - F Chassis B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5108987

Part#: B58FTURBINLET

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

The Burger Motorsports upgraded turbo inlet pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions creating more power and better turbo efficiency. The Burger Motorsports turbo Inlet pipe is a direct replacement for the plastic restrictive OEM unit.

Show More Show Less

Replacement Intake Coupler - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:583384

Part#: INTAKECOUPLER

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

MINI BMS Billet Intake For 2014+ B36/B38/B46/B48 - PRE LCI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:557781

Part#: MINIBMSINTAKE

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Intake - S63tu M5/M6 - Red Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857245

Part#: BMS-INTAKE-F10R

In Stock

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

BMS B46/B48 Billet Intake For BMW

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:35019968

Part#: BMSB46B48BINTAKE

In Stock

$ 229.99

This product was last offered at the strikethrough price on
06-12-2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.

Burger Motorsports Competition Cold Air Intake - White Dry Filter - B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959268

Part#: BMSB48INTKD

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.

Show More Show Less

Burger Motorsports S58 Port Injection Intake Manifold And Intercooler...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993579

Part#: BMSS58PIIM

Ships on Jul 28, 2026

Starting at $ 2,499.00 USD

Add to Wish List

Starting at $ 2,499.00 USD

Add to Wish List

When it comes to S58 intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your factory plastic S58 manifold and intercooler with a direct-fit, high-flow, high-strength aluminum manifold. The intercooler core is double the size of the factory unit, and the manifold features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern. Includes high-quality o-rings and all required hardware. The BMS manifold has approximately 76.1% more internal volume than the OEM manifold

Show More Show Less

BMS Drop-In Performance Air Filter - B48/58 G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621411

Part#: BMW-DIPAF-B4858

Ships on Jul 28, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter exceeds OE quality, utilizing layered, oiled cotton media for optimal airflow, effective contaminant filtration, and increased horsepower. This high-performance filter is washable, reusable, and designed to last the lifetime of your vehicle. With a simple drop-in installation, it seamlessly fits into your factory airbox. Replaces OEM BMW air filter part number: 13718577170.

Show More Show Less

BMS Competition Cold Air Intake - Red Oiled Filter - BMW G42 G20 G22/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924986

Part#: G2B58BMSINT-R

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

Phoenix Racing Port Injection Intake Manifold With 750cc Injectors An...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47644944

Part#: N55PIIMINJECT

Ships on Jul 28, 2026

$ 1,038.00 USD

Add to Wish List

Qty

$ 1,038.00 USD

Add to Wish List

Burger Motorsports' N55 High-Flow Aluminum Intake Manifold is an upgrade designed to replace the factory plastic intake manifold, enhancing both durability and performance for BMW N55 engines. Built from high-strength, lightweight aluminum, this manifold supports high flow rates and integrates top-mount port injection bungs for optimized fuel delivery and injector spray patterns. The manifold also features additional expansion vacuum ports, making it ideal for connecting larger blow-off valves, gauges, Hobb’s switches, and more.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51883658

Part#: G1B48CPBOV

Ships on Jul 28, 2026

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.

Show More Show Less

BMS Drop-In Performance Air Filters - S63/68

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688928

Part#: BMS-DAF-S6368

Ships on Jul 28, 2026

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Burger Motorsports Performance S63/S68 BMW X5, X5M, X7, and XM Drop-In Air Filters exceed OE standards, utilizing layered, oiled cotton media that maximizes airflow while effectively trapping contaminants and increasing horsepower. These high-performance filters are washable, reusable, and engineered to last the life of your vehicle. Easy to install, they fit directly into your factory airboxes for a quick upgrade.

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Blue Filter - BMW G2X G42 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959269

Part#: B58GFMCAI-B

Ships on Jul 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

Intake - S63tu M5/M6 - Blue Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857243

Part#: BMS-INTAKE-F10B

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

BMS B46/B48 Billet Intake - Red

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54852048

Part#: BMSB46B48BRI

Ships on Jul 28, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.

BMS Elite Front Mount Intake - F Chassis B58 - Red

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38789908

Part#: FB58FRONTMOUNTR

Ships on Jul 28, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks. In addition to freeing up power, turbo spool speed is greatly improved and there's an incredible sound improvement. You'll finally be able to hear your turbos spooling! The proprietary high flow inverted cone filters can be cleaned every 15-20k miles using a cleaning kit and will last the life of the car. FEATURES AND BENEFITS Adds up to 12+ Horsepower Dramatic sound improvement Unique look Improves throttle response Huge 3.5" mandrel-bent aluminum tubing Classy gloss black powder coat finish CNC Billet aluminum fittings Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

Burger Motorsports Aluminum Chargepipes - S63TU M5 M6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:556806

Part#: BMS-F-M5-ACP

Ships on Jul 28, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Though functionally identical to the stock plastic pipes, these Burger Motorsports chargepipes are an improvement in both reliability and versatility. This is due to their black gloss powder coated aluminum construction, giving them greater strength and a better appearance, and the inclusion of a 1/8" NPT bung & cap included in each pipe.

Show More Show Less

BMW 5bar Sensor - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822565

Part#: BMSB585BS

Ships on Jul 28, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS B46/B48 Billet Intake - Dry Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54852049

Part#: BMSB46B48BDI

Ships on Jul 28, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Billet intake with low-maintenance dry filter eliminates B48 induction restriction.

BMS Replacement Intercooler For E Chassis BMW

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621402

Part#: BMS-INTCLR-N5455

Ships on Jul 28, 2026

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

The BMS N54/N55 Replacement E-Chassis Intercooler Upgrade for BMW improves cooling efficiency, boosts wheel horsepower, and maintains performance during extended driving sessions. With a larger core and expanded surface area compared to the stock intercooler, it reduces pressure drop and significantly enhances cooling capacity. Expect peak gains of around 10whp, with sustained increases of 20-30whp during long pulls or repeated runs versus the factory intercooler. This E-Chassis upgrade is ideal for setups up to 500whp, while the 7.5" RACE intercooler supports builds reaching 1000whp. Designed as a direct-fit replacement, the BMS intercooler is fully reversible and requires no additional hardware for installation. E-Chassis BMW FMIC Dimensions: 20" x 5.25" x 5.25".

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Red Filter - BMW G2X G42 G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959270

Part#: B58GFMCAI-R

Ships on Jul 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMS Front Mount Performance Silicone Intake - Blue Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255920

Part#: S58FMSILINT-BLU

Ships on Jul 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Elevate the capabilities of your G8x or F9x S58-powered BMW with an intake system engineered to true motorsport standards. The BMS Front-Mount Performance Intake completely eliminates the restrictive OEM induction setup, replacing it with a continuous 3.5" high-flow tract designed for maximum volumetric efficiency.

Show More Show Less

BMS Drop-In Performance Air Filters - BMW G2X G4X Gen2 B48/B58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993569

Part#: G2B48B58DIAF

Ships on Jul 28, 2026

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

The Burger Motorsports performance B48/B58 G Chassis BMW drop-in air filter is OE quality and features layered, oiled cotton media engineered to improve airflow, capture contaminants, and increase horsepower. Each Burger Motorsports performance air filter is washable, reusable, and will last the entire life of your vehicle. Installs easily into your factory airbox. Replaces air filter OEM BMW part numbers 13718635102 or 13718580428

Show More Show Less

BMS Competition Cold Air Intake - Dry Filter - BMW G42 G20 G22/23/26 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924987

Part#: G2B58BMSINT-D

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

Burger Motorsports Competition Cold Air Intake - Blue Oiled Filter - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37689739

Part#: BMSB48INTKB

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.

Show More Show Less

BMS G Chassis B48 BMW Aluminum Short Turbo Inlet Upgrade

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:53997736

Part#: BMSGB48STI

Ships on Jul 28, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

For use with the BMS B48 Competition Air Intakes - The Burger Motorsports G Chassis B48 BMW aluminum short turbo inlet pipe upgrade maximizes and smooths airflow from the intake to the turbo by removing all restrictions, creating more power and better turbo efficiency. The Burger Motorsports turbo Inlet pipe is a direct replacement for the plastic restrictive OEM unit, BMW # 13718656981.

Show More Show Less

BMS Elite Intake - F Chassis B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5108984

Part#: ELITEB58INTAKE

Ships on Jul 28, 2026

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

The BMS Elite B58 Performance Intake outflows the OEM intake but retains everything that's good including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with larger higher flow ducting, a heatshield, and a quality BMS inverted cone air filter to match. Available alone or packaged with the B58 Turbo inlet maintaining that same high level of flow all the way to the turbo.

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - F22 F87 2 Series...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles equipped with a manual transmission only

T#:24677026

Part#: BMSF3XN55INTREDM

Ships on Jul 28, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling! Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway! Features: Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Looks great under the hood Cleanable and reusable filter Made in the USA *Not for sale or use in the state of California.

Show More Show Less

Burger Motorsports Competition Cold Air Intake - Red Oiled Filter - B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37689740

Part#: BMSB48INTKR

Ships on Jul 28, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.

Show More Show Less

Buger Motorsports 700HP Package - Blue Filters - BMW G8X S58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255925

Part#: S58700HP-BLUKT

Ships on Jul 28, 2026

$ 2,075.99

This product was last offered at the strikethrough price on
05-23-2026

$ 2,066.00 USD

Add to Wish List

Qty

$ 2,066.00 USD

Add to Wish List

Unleash 700+ HP with safe, proven JB4 tuning on your locked ECU while maintaining reliability and drivability. This package delivers maximum power, optimized airflow, and real-time performance monitoring—all with easy plug-and-play installation and no permanent modifications.

Show More Show Less

Burger Motorsports B46/B48 Billet Performance Intake System - Red Fil...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993583

Part#: BMS-G-INT-R

Ships on Jul 28, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug-and-play air intake system unlocks up to 8whp to the wheels from your B46/B48/B58 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for strength and a clean look. Includes a reusable high-flow inverted cone filter. The OEM cold air intake tube and insulating base remain fully functional. Installation takes only minutes and is fully reversible.

Show More Show Less

BMS Elite Intake - Blue Filters - F90 M5 F9X M8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12413843

Part#: F9XS63BLUE

Ships on Jul 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Blue Filter Variant. Includes all required hardware. It does NOT require any cutting or drilling. While the factory intake is very high flowing the BMS Elite intake provides power gains of up to 10whp range at 25psi+ boost levels. Sound and turbo spool-up speed are also improved. Made in the USA.

Show More Show Less

BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49752784

Part#: BMSS63TURACP

Ships on Jul 28, 2026

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

When you’re turning up the boost on your F-Chassis M5 or M6, the factory plastic charge pipes become a known weak link. The BMS Elite Replacement Aluminum Charge Pipes eliminate that failure point with a properly engineered, motorsport-grade solution built for the S63TU twin-turbo V8. Developed by Burger Motorsports specifically for the F10 M5 and F12/F13 M6, these mandrel-bent aluminum charge pipes provide a smooth, unrestricted airflow path from the turbos to the intercoolers, improving throttle response and maintaining consistent boost under load. More importantly, they’re built to survive where the OEM plastic pipes crack, split, and blow apart — especially on tuned or hard-driven cars. CNC-machined flanges, bead-rolled ends, and high-quality silicone couplers ensure a leak-free, secure connection, while all factory sensor ports and mounting locations are retained for a true bolt-on installation. No cutting, no tuning, no compromises — just a clean, OEM-plus upgrade that delivers the reliability your S63TU needs for street, track, and everything in between.

Show More Show Less

CANbus Flex Fuel Kit - Complete Kit W/ CABbus ECA & Universal Harness...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49613450

Part#: G8XS58CANFFUH

Ships on Jul 28, 2026

$ 479.99

This product was last offered at the strikethrough price on
05-22-2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

BMS Elite Intake - Red Filters - F90 M5 F9X M8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12413842

Part#: F9XS63RED

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Red Filter Variant. Includes all required hardware. It does NOT require any cutting or drilling. While the factory intake is very high flowing the BMS Elite intake provides power gains of up to 10whp range at 25psi+ boost levels. Sound and turbo spool-up speed are also improved. Made in the USA.

Show More Show Less

N54 Phoenix Racing BMW Front Facing Port Injection Manifold

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40072449

Part#: N54PHOENIXPORTIN

Ships on Jul 28, 2026

$ 649.00 USD

Add to Wish List

Qty

$ 649.00 USD

Add to Wish List

Manifold only!

BMS Competition Cold Air Intake - Dry Filter - BMW G20 G22/23/26 Gen3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924963

Part#: G3B58BMSINT-D

Ships on Jul 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.

Show More Show Less

Project Cars

SELECT YOUR BMW

Burger Motorsports BMW Intake Parts

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results