Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

• Adds up to 10+ Horsepower
• Dramatic sound improvement
• Super fast install and removal
• Improves throttle response 
• Retains OEM airbox base as a heat shield
• Retains OEM cold air ducting
• Looks great under the hood
• Cleanable and reusable filter
• Made in the USA

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Introducing the Turner Motorsport Bavarian Autosport Idle Control Valve for BMW M50, M52, and M54 engines. This crucial component, situated in the intake system, addresses common idle issues experienced by BMW owners. Enhance your BMW's performance and ensure smooth idling with this Idle Control Valve.

• Turner Motorsport's Bavarian Autosport Idle Control Valve for M50, M52, M54 engines.
• Targets and resolves common idle issues.
• Promotes smooth and consistent idling.
• Essential for maintaining optimal engine performance.
• Reliable component for BMW enthusiasts.

Upgrade your BMW's idle control system with the Turner Motorsport Bavarian Autosport Idle Control Valve, ensuring a seamless driving experience.

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

• Adds up to 10+ Horsepower
• Dramatic sound improvement
• Super fast install and removal
• Improves throttle response 
• Retains OEM airbox base as a heat shield
• Retains OEM cold air ducting
• Looks great under the hood
• Cleanable and reusable filter
• Made in the USA

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Upgrade your BMW's performance with the BMS N54 BOV Vacuum Adapter, a plug-and-play solution that enhances engine vacuum functionality. Easily attachable to the throttle body/brake booster vacuum line, this adapter provides two extra 1/8" NPT vacuum ports, offering versatile applications like replacing vacuum lines to diverter valves, connecting boost gauges, and more.

• Quick and hassle-free installation
• Two additional 1/8" NPT vacuum ports for multiple applications
• Ideal for replacing engine vacuum lines to diverter valves
• Enables a larger diameter boost reference to aftermarket BOV
• Perfect for adding extra boost gauges and accessories
• CNC machined for precise fit and durability
• Dual internal O-rings and retaining clip for a secure, factory-like seal
• Basic kit includes adapter, two 1/8" NPT caps, and one 1/8" vacuum nipple
• BOV kit adds two push lock fittings and 1/4" line for Tial BOV installation
• Made in the USA for quality assurance

Enhance your BMW's performance and functionality with the BMS N54 BOV Vacuum Adapter – a versatile, plug-and-play solution made in the USA.

Elevate your Mini Turbo Models, including Cooper S and JCW, with the ALTA BOV Spring Upgrade. This replacement spring offers a cost-effective, high-performance solution for your stock Blow Off Valve (BOV). By holding more boost between shifts, it significantly reduces turbo lag, enhancing overall performance. The carefully designed stiffer spring ensures normal BOV operation while maintaining increased pressure in the boost tubes, preventing power gaps.

• Simple and cost-effective upgrade for improved turbo response
• Reduces turbo lag between shifts, boosting overall performance
• Designed with a custom-made heat-treated 17-7 Stainless Steel Spring
• Rated for over 7,000,000 cycles for long-lasting durability
• Holds and vents up to 40psi efficiently

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as our other popular silicone hose products, this OE replacement elbow offers enhanced durability and performance.

• Direct bolt-on OE replacement. No modifications required.
• OE part is not available from MINI
• Four-ply 100% silicone construction.
• Eliminates OE hose failure caused by age, environmental exposure, heat, and high boost pressure.
• Easy to install with basic hand tools.
• Comes with two stainless steel lined hose clamps.

Perfect for high-performance MINIs running increased boost, this M7 Speed Cold Side Lower Intercooler Elbow is designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit includes one silicone elbow and two high-quality lined stainless steel clamps. Currently available only in BLACK, this elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.77” (45mm) ID at the turbo inlet.
• Easy DIY installation.

Enhance your Mini's performance with this brand new replacement air filter element designed for the M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and the R56 AGS-R Ram Air System. Pre-oiled for convenience, it comes with a new clamp, making installation a breeze. Improve airflow and maintain optimal engine efficiency with this high-quality air filter element.

• Direct replacement for M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and R56 AGS-R Ram Air System
• Pre-oiled for immediate use
• Includes new clamp for hassle-free installation
• Enhances airflow for improved engine performance
• Maintains optimal engine efficiency