BMW F8X Maad Maxx Rear Exhaust Section 3 Can Valve - With Carbon Fiber Tips by Active Autowerke redefines performance and sound for your BMW M3 or M4. Engineered to eliminate the factory exhaust's unflattering sound while optimizing flow and resonance, this axle-back exhaust delivers a deep, throaty growl that enhances the car's aggressive profile. The valved design allows for adjustable sound levels, offering both performance and refinement in one package.

• Enhances exhaust sound with deep, throaty growl
• Valved design for adjustable sound levels
• Improves airflow for increased performance
• Made in the USA with high-quality materials
• Carbon fiber tips for a stylish finish

Upgrade your BMW F80 M3 or F82 M4 with the Active Autowerke Maad Maxx Rear Exhaust Section for improved performance and a commanding exhaust note.

Akrapovic Titanium Slip-On Line Exhaust w/ Carbon Fiber Tips - BMW F95 X5 M | F96 X6 M

The Akrapovic Titanium Slip-On Line Exhaust w/ Carbon Fiber Tips - BMW F95 X5 M | F96 X6 M is a high-performance exhaust system designed to elevate the driving experience of your BMW X5 M or X6 M. Crafted from lightweight, high-grade titanium alloys and finished with carbon-fibre and titanium tailpipes, this system delivers a distinctive exhaust tone, enhanced power, and improved torque. The Slip-On Line (Titanium) features dual valves that tailor gas flow to produce the unmistakable Akrapovič sound, setting it apart from the stock M Sport exhaust. Dyno tests have shown power gains of 12.1 hp and torque increases of 35.4 Nm at 2,400 rpm. For even greater customization, the optional Akrapovič Sound Kit and Evolution Link Pipe Set (Titanium) allow you to fine-tune the exhaust tone and performance. Additionally, the system’s sleek carbon-fibre tips and optional handmade carbon-fibre diffuser enhance the vehicle’s visual appeal, making it a perfect blend of performance and style.

Key Benefits:

• Lightweight, high-grade titanium construction for durability and performance.
• Carbon-fibre and titanium tailpipes for a sleek, premium finish.
• Dual-valve system for a distinctive Akrapovič exhaust tone.
• Power gains of 12.1 hp and torque increases of 35.4 Nm at 2,400 rpm.
• Compatible with optional Akrapovič Sound Kit and Evolution Link Pipe Set for enhanced sound and performance.
• Handmade carbon-fibre diffuser available for added visual appeal.
• Meets ECE type approval for road legality.

Upgrade your BMW F95 X5 M or F96 X6 M with the Akrapovic Titanium Slip-On Line Exhaust w/ Carbon Fiber Tips and experience the perfect combination of performance, sound, and style.

The Corsa sport mufflers for the F10 M5 boost horsepower and torque and make a nicer sound than hushed sounds of the stock M5 exhaust system. This Corsa Sport exhaust for the M5 works with the Active Sound to make more growl and rumble so you can actually enjoy the V8 sound. Using stainless steel tubing with their performance muffler design they are able to reduce exhaust restriction compared to the stock system. As well as the tuned exhaust note and drone-eliminating sound, the mufflers use a straight-thru flow design for maximum flow and the least amount of restriction. Decreasing the back-pressure helps the turbos work more efficiently, processing exhaust gases easier and releasing more horsepower and torque. Power gains on the dyno were measured at 13hp and 18ft-lbs of torque compared to stock.

Also included is the patented Corsa Reflective Sound Cancellation to eliminate drone (commonly found on most straight-through muffler designs.) We have tried this muffler upgrade on our own M5 and can report back that it makes slightly more burble and throatiness than stock while remaining composed and civilized. The new sound is especially noticeable from outside the car where there is a bit more 'boom' to go with the M5's immense punch.

Reflective Sound-Cancellation (RSC) technology - This feature is a patented non-electrical noise control system, where engine sound (pressure) waves are reflected in passages inside the muffler 180 degrees out of phase to cancel out unwanted sound waves. The result is a tuned muffler that "cleans up" the noise without eliminating the pure sound of power associated with a high-performance vehicle. Using the Corsa technology, the stainless steel mufflers are tuned to eliminate passenger cabin resonance and produce just the "right" sound. The result is quieter cruising with an awe-inspiring roar at full throttle. This system is amazingly quiet during normal cruising, due to the "no drone" RSC technology, yet still has an aggressive presence and full sound while under throttle. This makes for ideal sound for those that want an aggressive "roar" while driving hard, yet still want a more discrete lower volume for normal cruising.

This is an axle-back system, which replaces only the rear mufflers of the stock M5 exhaust. It's very easy and straightforward to install and the rest of the exhaust can remain on the car. The Corsa mufflers are designed to install at an existing cut-point in the factory exhaust which makes it easy to reinstall the original exhaust at any time (factory sleeve clamps required to reinstall). This system is 100% Made in the USA and carries a lifetime warranty from the manufacturer. This exhaust is emissions legal in all 50 states (no effect whatsoever on emissions, and there will not be any "Check Engine" warning lights).
 

section:rear mufflers

connects to:stock exhaust section up to the rear axle

tip style: 102mm quad round

material:T304 stainless steel

This item fits the following BMWs:
2012+ F10 BMW M5

• Seamless integration with BMW F80 and F82 models
• Precise control over drive modes and valve operation
• Easy installation process
• Reliable functionality for enhanced driving experience

Megan Racing Exhaust Systems for BMW

Upgrade your BMW's exhaust system with Megan Racing exhaust systems, crafted from 100% 304 stainless steel. Dyno-tested and proven to enhance power, these exhaust systems offer superior performance over your OEM restrictive exhaust. Enjoy a sportier exhaust note with the axle-back design. Constructed from stainless steel, Megan Racing exhausts are significantly lighter than OEM systems, improving the Power:Weight ratio and enhancing vehicle handling and performance. Plus, enjoy easy installation with no cutting or welding required.

• Made from 100% 304 stainless steel
• Dyno-tested for proven power gains
• Axle-back design for free-flowing performance
• Lightweight construction improves Power:Weight ratio
• Easy installation with no cutting or welding required