These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.

These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.

Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS sway bars (other brands may not need the hardware). 

At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.

*Note: these links will not work with factory or non-adjustable Eibach sway bars.

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
 

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"

Please select your length below. 

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

• Adjustable to neutralize preload on sway bar (balanced handling)
• The ability to set sway bar geometry and clearance
• Low friction ball joints
• High articulation
• Direct replacement for OEM sway bar links
• Watertight boot seal
• Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.

Lowering your BMW does wonders for appearance and handling, but it also changes suspension geometry in ways that can hurt performance. As ride height changes, angles between the sway bar, control arms, and axles shift, which can cause binding, poor fitment, and added stress on the factory fixed-length end links. This is especially noticeable on cars equipped with coilover suspension, where slight height differences side to side can preload the sway bar and lead to inconsistent handling.

Our team of dedicated BMW enthusiasts set out to remedy this common issue with a set of Adjustable Rear Sway Bar End Links. Designed with performance in mind, they offer a fully adjustable range from 100mm to 120mm, helping eliminate preload, restore proper suspension alignment, and improve overall sway bar function. Constructed from high-quality billet aluminum, these end links are built to outlast the factory cast components and are finished with a black anodized coating for excellent corrosion resistance. Laser-etched wrench size markings allow for quick, easy adjustments while installed on the vehicle. Unlike the factory design, these end links use spherical rod ends at the control arm for increased responsiveness and a more direct handling feel. A unique knurled bushing design also ensures compatibility with the OEM sway bar, offering a first-to-market solution for enthusiasts looking to retain factory components.

Features & Benefits:

Adjustable from 100mm to 120mm Strong 6061-T6 billet aluminum construction Black anodized finish resists corrosion Spherical rod ends improve response and handling feel Polyurethane bushing with knurled bore helps retain grease Fits factory rear sway bars on E23, E24, E28, E30, and E36 Laser-etched markings for quick and easy adjustments

Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.

• Direct replacement for stock sway bar links
• Over 10 times stronger and more rigid than stock plastic parts
• Improved sway bar response and increased wheel rate
• Sealed and permanently lubricated tie rod ends for longevity
• Corrosion-resistant finishes for durability
• Lifetime guarantee for all parts

There are a lot of enthusiasts still committed to the E30 3-series. For these owners, giving up their 318, 325, or M3 is out of the question. We've tried to make it harder for them to part with their cars by developing reinforcements for common weak areas of the E30 chassis. With these pieces, you can prevent a costly repair or total failure that could cost you lots of money. These are a must-have for any E30 restoration (yes, restoration is the right word these days) or even during normal suspension work. Included in this package are reinforcements for:

• front subframe
• rear sway bar / swaybar tabs (from trunk floor)
• rear lower sway bar tab (on trailing arm)
• optional front sway bar tab (M3 only)

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3

MAXX-G Adjustable Suspension Links, designed to add bind-free travel and straightforward camber adjustments to the rear suspension of any MINI. These links feature a solid aluminum 1" hex adjuster sleeve with opposing 3/4" left-hand and right-hand threads at each end, allowing effortless camber adjustment. The exclusive Hybrid Polymer MonoBall (HPMB) link end, a groundbreaking design in the industry, combines the benefits of a rod end for suspension movement with the vibration isolation and durability of a urethane bushing.

PRODUCT BENEFITS:

• Enhances cornering performance and suspension alignment
• Industry-first "Hybrid Polymer MonoBall" (HPMB) link ends
• Combines advantages of monoball rod ends and urethane bushings
• Offers bind-free high angular misalignment with noise-free operation
• Forged alloy steel main housing with a sealed polymer race for vibration dampening
• Serviceable, rebuildable, and greasable
• Military-grade 6061-T6 aluminum adjuster sleeve for easy length adjustments
• Made in the USA & GUARANTEED for LIFE!

MINI R60 R61 M7 Rally Sport Suspension Kit - Stage 1

The ultimate upgrade for MINI enthusiasts seeking top-tier performance. Enhance your driving experience with improved handling and control, designed specifically for rally sport enthusiasts.

• Enhanced handling and control
• Specifically designed for rally sport enthusiasts
• Top-tier performance upgrade
• Tailored for MINI R60 R61 M7 models

For MINI R Chassis M7 MAXX-G Heavy Duty Adjustable Swaybar Endlinks - 300-325mm (11.81-12.79"), look no further! These swaybar endlinks are designed specifically for MINI R Chassis models, offering heavy-duty construction and adjustable functionality. Crafted by M7, a trusted brand in performance parts, they provide enhanced stability and control during cornering. Upgrade your MINI's suspension system with these adjustable swaybar endlinks and experience improved handling and responsiveness on the road.

• Designed for MINI R Chassis models
• Heavy-duty construction for durability
• Adjustable functionality
• Enhances stability and control during cornering
• Improves handling and responsiveness