E9X Macht Schnell Driver Side Clubsport Seat Mount

T#:16907171

Part#: 70.10.203

Ships in 7 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

Macht Schnell Passenger Side Clubsport Seat Mount - E9X BMW

T#:16907173

Part#: 70.10.204

Ships in 8 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

A/C Solutions BMW E30 R134a Retrofit Kit (82319067394)

T#:29466776

Part#: ACS-30-RETROFIT-

Ships in 3 Business Days

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross-compatible to the OEM BMW retrofit kit provided in the late 1990s. What's the difference between this and the full kit? Unlike our full A/C Solutions BMW E30 Conversion Kit, this product only provides the bare minimum components needed to refresh your factory system. This is a great solution for the 318i/is (M42) which uses the Denso compressor; however, for M20-based E30s that use the Bosch compressor, we highly recommend using our full conversion kit that contains a Sanden compressor, parallel flow condenser, and R134a specific expansion valve. What’s in the box? OE R134a filter drier Safety high/low-pressure cut off switch R134a low and high-pressure service fittings E30 R134a o-ring kit R134a retrofit label

Show More Show Less

A/C Solutions BMW E30 Bracket And Hardware Kit

T#:29466771

Part#: ACS-30-ABCD-KIT

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay. What’s in the box? A/C Solutions hose bracket holder (low-pressure line) (#1) Body spacer (high-pressure line) (#2) Hose clamp (large) (#3) Hose clamp (mid) (2x) (#4) Hose clamp (small) (2x) (#5) ST 10mm trim screw (long) (#6) ST 10mm trim screw (mid) (2x)(#7) ST 10mm trim screw (short) (3x) (#8) Expanding body nut (5x) (#9) M6 lock nut (#10) M6 lock washer (#11) M6 washer (#12) 10mm body speed clip (#13) Fitment notes: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram. For use with the following models: BMW E30 Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496

Show More Show Less

A/C Solutions R134a Retrofit Kit (82319067396) - E31, E32, E34 ...

T#:42638598

Part#: ACS-34-RETROFIT

Ships in 1 Business Day

$ 122.00 USD

Add to Wish List

Qty

$ 122.00 USD

Add to Wish List

This retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retrofit kit provided in the late 1990s.

A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...

T#:29466786

Part#: ACS-203038-KIT

Ships in 3 Business Days

$ 225.99 USD

Add to Wish List

Qty

$ 225.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) ...

For Vehicles Produced Up To 06/1987 with the M30B34 Engine & Without Rear A/C

T#:32350872

Part#: 24-635-S-B34

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

Seat Floor Adapters - E36, E46, E85 - Macht Schnell

T#:300563

Part#: 79.10.101B

Ships on Dec 1, 2026

$ 235.00 USD

Add to Wish List

Qty

$ 235.00 USD

Add to Wish List

In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or right sides of vehicle.

These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

This item fits the following BMWs:
1995-1999 E36 BMW 318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
2003-2008 E85 E86 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Macht Schnell Driver Side Clubsport Seat Mount - E46 BMW

T#:16907170

Part#: 70.10.201

Ships on Dec 4, 2026

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Performance Seat Mounting Kit

Revamp your racing seat setup with this comprehensive mounting kit, designed for precision, adjustability, and durability. Here are the key features:

Crafted from a single piece of 1/8” carbon steel for precise construction
SmoothGlide seat sliders with adjustment handle included
Installs onto factory bolt locations for precise fitment
Multiple adjustment options for precise centering
Offers 5 & 6 point sub belt mounting locations
Single-tool adjustments facilitated by bottom locking hardware
Utilizes high-grade 10.9 hardware for optimal strength
Powder-coated finish on base and side mounts for durability
Includes nylon side mount spacers for enhanced stability

Upgrade your racing setup with this top-notch mounting kit, available in standard and wide widths.

Show More Show Less

BMW R134a Safety Pressure Switch (Black)

T#:32118918

Part#: ACS-R134ASWITCHB

Back Ordered

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a safety high/low-pressure cut off switch Fitment notes: This switch is compatible with the late model E30 filter drier. For use with the following models: BMW E30 (all) Cross reference part numbers: 64538390971, 64531386813, SW11509C, 1711418, 36571

Show More Show Less

BMW E30 R134a Expansion Valve

T#:29666091

Part#: ACS-30-XV

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement component during any R134a retrofit. What’s included? R134a expansion valve Fitment notes: For use with the following models: BMW E30 (all)

Show More Show Less

BMW E30 R134a Filter Drier (Early Model)

T#:29500118

Part#: ACS-30-E-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the early high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For late-model applications, see ACS-30-L-FD For use with the following models (< 09/89): BMW E30 (all)

Show More Show Less

A/C Solutions BMW E30 LHD Interior Lines

T#:29300814

Part#: ACS-30-INT-SET

Ships in 3 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line

Show More Show Less

BMW F8X Macht Schnell Driver Side Clubsport Seat Mount

T#:16907176

Part#: 70.10.205

Ships on Dec 22, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

BMW F8X Macht Schnell Driver Side Clubsport Seat Mount provides a top-tier solution for securely mounting racing or aftermarket seats in your BMW. This high-quality seat mount kit includes everything needed for a straightforward installation, ensuring durability and precise fitment. Constructed from carbon steel and featuring smooth seat sliders, it offers a combination of strength, lightweight design, and ease of use.

Precision Engineering: Made from single-piece 1/8” carbon steel with laser-cut and formed construction for zero play and precise fitment.
Smooth Operation: Includes SmoothGlide seat sliders with an adjustment handle for easy seat positioning.
Factory Fitment: Mounts directly to factory bolt locations, providing a precise and secure fit.
Adjustability: Features multi-way adjustability for accurate seat centering and alignment.
Versatile Mounting: Includes 5 & 6-point sub belt mounting locations for added safety and customization.
Ease of Installation: Single-tool adjustments with locking hardware and no modifications required for installation.
Durability: Powder-coated base and side mounts with 10.9 Grade Hardware for long-lasting performance.
Reversible Installation: Fully reversible setup, allowing for easy changes or removal.

Specifications:

Material: 1/8” Carbon Steel
Included: Mounting brackets, sliders, adjustment mechanisms
Adjustability: Multi-way adjustability for precise centering
Mounting Locations: 5 & 6-point sub belt
Hardware: 10.9 Grade, single-tool adjustments
Finish: Powder-coated base and side mounts
Additional: Nylon side mount spacers

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - M6 (S38B35) W/ Rear A...

For Vehicles With Rear A/C Only

T#:32350876

Part#: 24-M6-R

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

For Vehicles Produced Up To 09/87 Only

T#:29666099

Part#: 30-325-EARLY-AC

Ships in 6 Business Days

Starting at $ 1,709.35 USD

Add to Wish List

Starting at $ 1,709.35 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)

T#:29466793

Part#: SD5H14-6630

Ships in 3 Business Days

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)

Show More Show Less

CSF E30 Parallel Flow Condenser + 13" SPAL Fan Combo

T#:29500098

Part#: ACS-30-CSF-SPAL-

Ships in 3 Business Days

$ 378.99 USD

Add to Wish List

Qty

$ 378.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser and SPAL fan upgrade will replace your factory condenser and auxiliary fan resulting in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. Note: In order to properly run any SPAL fan, additional wiring will be required What’s included? CSF parallel flow condenser (cross ref # 64538391509) Genuine SPAL 13" straight blade pusher fan 30A fuse Mounting hardware Detailed installation instructions Fitment notes: Additional wiring will be required For use with the following models: BMW E30 (all)

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (standard)

T#:29466797

Part#: SD5H14-6668

Ships in 3 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.

Show More Show Less

A/C Solutions E30 24v Swap Denso Compressor Manifold

T#:32284524

Part#: ACS-24V

Ships in 3 Business Days

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E30. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso Compressor (Denso 471-1114 or 471-1115) and the A/C Solutions E30 24v Swap Lines. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all) PATENT PENDING

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

T#:29466768

Part#: ACS-30-AB-SET

Ships in 3 Business Days

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

BMW R134a High-Pressure Cut Off Switch (Green)

T#:29666089

Part#: ACS-R134ASWITCHG

Ships in 3 Business Days

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307

Show More Show Less

A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And...

T#:32284525

Part#: ACS3024VABMFKIT1

Ships in 3 Business Days

$ 663.00 USD

Add to Wish List

Qty

$ 663.00 USD

Add to Wish List

Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E30 using the E36 M3 Denso compressor. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. This setup is designed to work with the S50, S52, S54, M50, M52, and M54 engines, offering seamless integration and reliable performance. Which model (chassis) should I choose? Select the model (chassis) assigned to your E30 when it left the factory to ensure the proper line routing. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Denso manifold o-ring Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso compressor (Denso 471-1114 or 471-1115). BMW compressor bracket (64551730768) will be required to support the Denso compressor. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all)

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) W/ Re...

For Vehicles Produced From 06/1987+ with the M30B35 Engine & With Rear A/C

T#:32350875

Part#: 24-635-R-B35

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) W/ Re...

For Vehicles Produced Up To 06/1987 with the M30B34 Engine & With Rear A/C

T#:32350874

Part#: 24-635-R-B34

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) ...

For Vehicles Produced From 06/1987+ with the M30B35 Engine & Without Rear A/C

T#:32350873

Part#: 24-635-S-B35

Special Order: No Guaranteed ETA

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

For Vehicles Produced From 09/87+ Only

T#:32350866

Part#: E3024VLATE

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Mid Model

For Vehicles Produced From 09/87 Up To 08/89 Only

T#:32317675

Part#: E30325MID

Ships in 3 Business Days

Starting at $ 1,756.00 USD

Add to Wish List

Starting at $ 1,756.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Mode...

T#:29300810

Part#: ACS-30-C-LATE-SE

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64538391041, 64531381741, 61627198552

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

For Vehicles Produced From 09/87+ Only

T#:32350825

Part#: E30M3LATE

Back Ordered

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

For Vehicles Produced Up To 09/87 Only

T#:32317688

Part#: E30M3EARLY

Ships in 3 Business Days

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

BMW E30 R134a Filter Drier (Late Model)

T#:29500124

Part#: ACS-30-L-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the late model high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For early model applications, see ACS-30-E-FD For use with the following models (≥ 09/89): BMW E30 (all)

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

For Vehicles Produced From 09/89+

T#:29666101

Part#: 30-325-LATE-AC

Ships in 3 Business Days

Starting at $ 1,709.99 USD

Add to Wish List

Starting at $ 1,709.99 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which model/year should I choose? Use the mfg. date on the driver's door of your E30 as well as our supplemental user guide to select the appropriate combination for your car. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc.

Show More Show Less

Macht Schnell Passenger Side Clubsport Seat Mount - F8X

T#:16907179

Part#: 70.10.206

Ships in 8 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

Macht Schnell Ashtray Gauge Panel - E82

T#:4648663

Part#: 50.10.020

Ships in 10 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Macht Schnell's gauge panel is designed to be a direct replacement for the stock ashtray in the E82. This panel mounts using factory ashtray mounting holes and no unnecessary modification is required. The textured plastic is composed of ABS plastic that resists warping or bending in high heat and feels similar in touch to OEM. *Please contact us for custom painting options. Designed for 52mm gauges.

Show More Show Less

Macht Schnell - Clubsport Seat Mount - Toyota A90 Supra (Passenger Si...

T#:36201636

Part#: MS.70.30.209

Ships in 8 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Macht Schnell - Clubsport Seat Mount - Toyota A90 Supra (Passenger Side) is the ultimate solution for performance-driven enthusiasts seeking precision fitment and superior durability in their Toyota Supra A90. Designed to enhance safety and deliver a custom driving experience, this high-quality seat mount is engineered specifically for the passenger side, ensuring a flawless installation in your vehicle.

Built for track day enthusiasts and professional racers alike, this seat mount provides optimal rigidity and stability while reducing unnecessary weight, making it an essential upgrade for anyone looking to achieve the perfect balance between performance and safety.

Precision-engineered fitment for the Toyota A90 Supra passenger side
Crafted from lightweight yet durable materials to enhance performance
Provides unparalleled stability and rigidity for high-performance driving
Ideal for aftermarket racing seats, ensuring compatibility and ease of installation
Corrosion-resistant finish for long-lasting durability
Designed and tested to meet the demands of motorsport applications

Turner Motorsport offers the Macht Schnell - Clubsport Seat Mount as part of its premium selection of aftermarket performance products. This upgrade ensures your Supra is ready for the track while retaining comfort and reliability for everyday use.

Show More Show Less

Seatbelt 4-point Race Harness Receptacles - Macht Schnell

T#:338505

Part#: 79.12.15X

Ships on Nov 17, 2026

Starting at $ 125.00 USD

Add to Wish List

Starting at $ 125.00 USD

Add to Wish List

If you're going to use a 4 point racing harness with your racing or sport seat and don't want to drill through your floor and carpet, these harness adapter plates are perfect*. These sandwich in between your slider and seat bracket for a strong and secure mounting point. They are made from high-strength steel and powedercoated in stealthy black. Choose from a bolt-in or clip-in style harness end. These will only work with the Macht Schnell floor mounts.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Macht Schnell Aluminum Floor Mount Set - F8X M3 / M4

T#:4648701

Part#: MS-F8X-FLOORMT

Ships on Nov 6, 2026

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

Race seats can offer a an immediate improvement in driver feedback while also keeping you planted to the seat and concentrated on driving, while offering a significant weight savings. However, most race seat companies leave it up to the driver for a mounting solution. Macht Schnell Floor Mounts are designed for the serous track enthusiast in mind. CAD designed and machined from 6061-T6 aerospace aluminum, these mounts are as strong as they are light. Multiple mounting positions allow driver to dial in an exact seat position that is most comfortable and perfectly centered to the steering wheel. Sold as set - one seat. *2 sets needed for driver and passenger seat install.

Show More Show Less

Macht Schnell - Clubsport Seat Mount - Toyota A90 Supra (Driver Side)...

T#:36201635

Part#: MS.70.30.208

Ships in 8 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Macht Schnell - Clubsport Seat Mount - Toyota A90 Supra (Driver Side) is the ultimate performance upgrade for driving enthusiasts and professional racers who demand precision and reliability. Specifically designed for the Toyota A90 Supra, this driver-side seat mount delivers an uncompromising fit, unmatched stability, and enhanced safety for track-focused and daily driving applications.

This premium-quality seat mount is engineered to accommodate aftermarket racing seats, ensuring optimal compatibility and ease of installation. Its lightweight construction minimizes added weight while maintaining exceptional durability, making it a must-have for maximizing your vehicle's performance potential.

Tailored for the Toyota A90 Supra driver side to ensure perfect fitment
Robust yet lightweight design for improved handling and reduced weight
Provides superior stability and safety for high-performance driving
Compatible with most aftermarket racing seats for seamless integration
Corrosion-resistant finish for extended lifespan and durability
Tested and proven in motorsport conditions for reliability and performance

Turner Motorsport proudly offers the Macht Schnell - Clubsport Seat Mount as part of its extensive selection of premium aftermarket products. Equip your A90 Supra with this essential upgrade to dominate on the track or enjoy a sportier ride on the road.

Show More Show Less

BMW E46 Macht Schnell Passenger Side Clubsport Seat Mount - E46 BMW ...

T#:16907172

Part#: 70.10.202

Special Order: No Guaranteed ETA

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Comes complete with mounting brackets, sliders, and adjustment mechanisms. Lightweight, strong and simple to install. Integrated locking stops for hardware provide single-tool adjustments. No modifications required for installation and fully reversible at any time. Available in standard (most race shells) and wide widths. Sold individually. Features: - Precision laser cut & formed from single piece of 1/8” carbon steel, allowing zero play. - SmoothGlide seat sliders included with adjustment handle - Mounts to factory bolt locations with precise factory fitment - Multi-way adjustability for precise centering - 5 & 6 point sub belt mounting locations - Single tool adjustments with bottom locking hardware - 10.9 Grade Hardware - Powdercoated base and side mounts - Nylon side mount spacers

Show More Show Less

Macht Schnell Clubsport Seat Mount - Right - E85/E86 Z4 & Z4M ...

T#:29566599

Part#: 70.30.203

In Stock

$ 325.00

This product was last offered at the strikethrough price on
05-03-2026

$ 300.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 325.00

This product was last offered at the strikethrough price on
05-03-2026

$ 300.99 USD

Limited Qty Sale

Add to Wish List

Achieve peak performance and effortless installation with this all-inclusive seating kit. Designed to provide everything you need—mounting brackets, seat sliders, and adjustment mechanisms—this kit combines lightweight construction with exceptional durability. Installation is straightforward, featuring integrated locking stops for quick, single-tool adjustments.

Reversible and modification-free, this seat kit delivers convenience and precision, perfect for discerning racers. Available as a single unit.

Features:

High-Strength Construction: Fabricated from a single 1/8” laser-cut carbon steel piece, ensuring unparalleled stability and zero play. SmoothGlide Seat Sliders: Comes with ergonomic adjustment handles for easy customization. Factory Fit: Mounts directly to factory bolt locations for an impeccable fit. Multi-Way Adjustability: Allows for precise centering and alignment. Belt Compatibility: Includes 5 & 6 point sub-belt mounting locations for enhanced safety. Easy Adjustments: Single-tool adjustments with integrated bottom-locking hardware. Durable Hardware: Includes 10.9 Grade high-strength bolts. Powder-Coated Finish: Base and side mounts are powder-coated for increased durability and aesthetic appeal. Convenient Spacers: Nylon side mount spacers are included for added ease during installation. Upgrade your race shell with this premium, turnkey seating kit and experience the perfect blend of performance and ease.

Show More Show Less

A/C Solutions BMW E30 E28 E24 R134a O-Ring Kit

T#:29466775

Part#: ACS-O-RING-KIT

Ships in 3 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system to the modern HNBR R134a standard. This is cross compatible with all versions of the E30, E28, E24, and E23, and may include additional o-rings as a result. What’s included? 2x #12 R134a o-rings 4x #10 R134a o-rings 6x #8 R134a o-rings 5x #6 R134a o-rings Fitment notes: For use with the following models: BMW E23, E24, E28, E30, E32 Cross-reference part numbers: 64508390602, 64508390601, 64508390603, 64508390604, 64508390605, 64531350491

Show More Show Less

A/C Solutions Box Sticker

T#:29466780

Part#: ACS-BOX-STICKER

Ships in 3 Business Days

$ 2.75 USD

Add to Wish List

Qty

$ 2.75 USD

Add to Wish List

The original A/C Solutions box sticker - perfect for your corner window, tool chest, laptop, desk, and more. Made in the USA. What’s included? A/C Solutions box sticker (4" wide)

A/C Solutions BMW E24 Complete Conversion Kit - 633CSi (09/1982+) ...

For Vehicles Produced From 09/1982+

T#:32350871

Part#: 24-633-S

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.

Show More Show Less

Denso Compressor Manifold R134a O-Ring

T#:32284523

Part#: 471-O-RING

Ships in 3 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

New HNBR manifold gasket designed for the E36 M3 Denso Compressor and/or our 24v Swap Denso Compressor Manifold to ensure your A/C system is properly sealed. This can be used with both R12 and R134a and meets or exceeds factory specifications. What’s included? Denso manifold o-ring Cross-reference part numbers: MT9519, 24156, 19188305, 88918403, 1531721, 471

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

T#:32284522

Part#: ACS-30-1014-AB-S

Ships in 3 Business Days

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

A/C Solutions BMW S14 M10 Sanden Compressor Bracket

T#:32118912

Part#: ACS-1014-KIT

Ships in 3 Business Days

$ 325.99 USD

Add to Wish List

Qty

$ 325.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using a fully isolated (bushed) design similar to that of the factory E30 M3 assembly. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and zinc-plated to withstand the toughest conditions without sacrificing the OEM look and feel. Overall package weight (including compressor) comes in at 17lbs (less than the original E30 M3 assembly) and boasts a tighter center of gravity for less stress on the isolator bushings. What’s included? A/C Solutions S14/M10 Sanden compressor bracket Yellow zinc 8.8 and 10.9 hardware Compressor ground wire Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. A larger V-belt will be required (Gates 13x875mm). For use with the following models: BMW E30 (318i, 320is, M3) PATENT PENDING Cross-reference part numbers: 64521268536, 64521277002, 64521706826, 07119932095, 07119904115, 07119901161, 07119905549, 07119932112, 07119932122, 07119904463, 07119900581, 07119902912, 07119913664, 64521268537, 64521268538, 32411705063, 07119900052, 07119907030, 07129946400, 07129905767, 64521278034, 07119912712, 07129964672, 64521278036, 64521276354, 07119901120, 07119903039

Show More Show Less

R12 To R134a Low And High-Pressure Service Port Adapter Fittings ...

T#:29666088

Part#: ACS-R134A-ADAPTE

Ships in 3 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Designed for use on the E24, E28, and E30, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports to charge the system with R134a. What’s included? R134a low and high-pressure service fittings Fitment notes: Low profile design allows for clearance around BMW E30 hood support. For use with the following models: BMW E23, E24, E28, E30

Show More Show Less

A/C Solutions R134a Retrofit Label

T#:29466781

Part#: ACS-RETROFIT-LAB

Ships in 3 Business Days

$ 6.95 USD

Add to Wish List

Qty

$ 6.95 USD

Add to Wish List

Designed to mimic the factory BMW and Porsche design language, this engine bay label is used to document the amount and date of R134a added to the system after completing any A/C repair. This sticker is designed for high temp engine bay applications and should be placed in a visible spot for future service technicians to reference. Made in the USA. What’s included? A/C Solutions R134a retrofit label (3.75" wide) Cross reference part numbers: 64508363254

Show More Show Less

CSF E30 Parallel Flow Condenser

T#:29500095

Part#: ACS-30-CSF-KIT

Ships in 3 Business Days

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser is used to replace your factory tube and fin condenser and is built to work with a SPAL 13" pusher fan (sold separately). This upgrade will result in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. What’s included? CSF parallel flow condenser (cross ref # 64538391509) Mounting hardware

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Interior Parts

Sub-Categories

Performance Seat Mounting Kit

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results