Find Parts That Fit Your Vehicle

A/C Solutions BMW Interior Parts

The interior of your BMW is where you will hopefully spend most of your time, so it should be ergonomic, comfortable, and safe. All interior components, from OEM replacement switches, trim, or steering wheels, to aftermarket upgrades like racing wheels, safety equipment, and racing seats, are available at Turner Motorsport.

Sub-Categories

Sort By:
A/C Solutions BMW E30 R134a Retrofit Kit (82319067394)
A/C Solutions BMW E30 R134a Retrofit Kit (82319067394)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466776
Part#: ACS-30-RETROFIT-
Ships in 4 Business Days
$ 108.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 108.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross-compatible to the OEM BMW retrofit kit provided in the late 1990s. What's the difference between this and the full kit? Unlike our full A/C Solutions BMW E30 Conversion Kit, this product only provides the bare minimum components needed to refresh your factory system. This is a great solution for the 318i/is (M42) which uses the Denso compressor; however, for M20-based E30s that use the Bosch compressor, we highly recommend using our full conversion kit that contains a Sanden compressor, parallel flow condenser, and R134a specific expansion valve. What’s in the box? OE R134a filter drier Safety high/low-pressure cut off switch R134a low and high-pressure service fittings E30 R134a o-ring kit R134a retrofit label
Show More Show Less
BMW E30 R134a Expansion Valve
BMW E30 R134a Expansion Valve
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29666091
Part#: ACS-30-XV
Ships in 4 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 35.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement component during any R134a retrofit. What’s included? R134a expansion valve Fitment notes: For use with the following models: BMW E30 (all)
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Late Model
A/C Solutions BMW E30 Complete Conversion Kit - Late Model
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/89+
A/C Solutions - Corporate Logo
T#:29666101
Part#: 30-325-LATE-AC
Ships in 3 Business Days
Starting at $ 1,709.99 USD
Add to Wish List
Starting at $ 1,709.99 USD
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which model/year should I choose? Use the mfg. date on the driver's door of your E30 as well as our supplemental user guide to select the appropriate combination for your car. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc.
Show More Show Less
A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E24, Etc.)
A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466786
Part#: ACS-203038-KIT
Ships in 4 Business Days
$ 225.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 225.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING
Show More Show Less
A/C Solutions BMW E30 Bracket And Hardware Kit
A/C Solutions BMW E30 Bracket And Hardware Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466771
Part#: ACS-30-ABCD-KIT
Ships in 4 Business Days
$ 79.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 79.99 USD
Free Shipping on orders $49 and up
Add to Wish List
For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay. What’s in the box? A/C Solutions hose bracket holder (low-pressure line) (#1) Body spacer (high-pressure line) (#2) Hose clamp (large) (#3) Hose clamp (mid) (2x) (#4) Hose clamp (small) (2x) (#5) ST 10mm trim screw (long) (#6) ST 10mm trim screw (mid) (2x)(#7) ST 10mm trim screw (short) (3x) (#8) Expanding body nut (5x) (#9) M6 lock nut (#10) M6 lock washer (#11) M6 washer (#12) 10mm body speed clip (#13) Fitment notes: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram. For use with the following models: BMW E30 Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496
Show More Show Less
A/C Solutions BMW E30 LHD Interior Lines
A/C Solutions BMW E30 LHD Interior Lines
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29300814
Part#: ACS-30-INT-SET
Ships in 4 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line
Show More Show Less
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34)
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 06/1987 with the M30B34 Engine & Without Rear A/C
A/C Solutions - Corporate Logo
T#:32350872
Part#: 24-635-S-B34
Ships in 4 Business Days
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
BMW R134a Safety Pressure Switch (Black)
BMW R134a Safety Pressure Switch (Black)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32118918
Part#: ACS-R134ASWITCHB
Ships in 4 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a safety high/low-pressure cut off switch Fitment notes: This switch is compatible with the late model E30 filter drier. For use with the following models: BMW E30 (all) Cross reference part numbers: 64538390971, 64531386813, SW11509C, 1711418, 36571
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Early Model
A/C Solutions BMW E30 Complete Conversion Kit - Early Model
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 09/87 Only
A/C Solutions - Corporate Logo
T#:29666099
Part#: 30-325-EARLY-AC
Ships in 6 Business Days
Starting at $ 1,709.35 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 1,709.35 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
Genuine Sanden 508 (SD5H14) Compressor (standard)
Genuine Sanden 508 (SD5H14) Compressor (standard)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466797
Part#: SD5H14-6668
Ships in 4 Business Days
$ 325.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 325.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.
Show More Show Less
Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)
Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466793
Part#: SD5H14-6630
Ships in 4 Business Days
$ 285.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 285.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)
Show More Show Less
A/C Solutions R134a Retrofit Kit (82319067396) - E31, E32, E34
A/C Solutions R134a Retrofit Kit (82319067396) - E31, E32, E34 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:42638598
Part#: ACS-34-RETROFIT
Ships in 4 Business Days
$ 122.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 122.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retrofit kit provided in the late 1990s.
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35)
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 06/1987+ with the M30B35 Engine & Without Rear A/C
A/C Solutions - Corporate Logo
T#:32350873
Part#: 24-635-S-B35
Ships in 4 Business Days
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Mid Model
A/C Solutions BMW E30 Complete Conversion Kit - Mid Model
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87 Up To 08/89 Only
A/C Solutions - Corporate Logo
T#:32317675
Part#: E30325MID
Ships in 3 Business Days
Starting at $ 1,756.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 1,756.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) W/ Rear A/C
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B35) W/ Re...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 06/1987+ with the M30B35 Engine & With Rear A/C
A/C Solutions - Corporate Logo
T#:32350875
Part#: 24-635-R-B35
Ships in 4 Business Days
$ 949.00 USD
Free Shipping
Add to Wish List
$ 949.00 USD
Free Shipping
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
BMW R134a High-Pressure Cut Off Switch (Green)
BMW R134a High-Pressure Cut Off Switch (Green)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29666089
Part#: ACS-R134ASWITCHG
Ships in 4 Business Days
$ 52.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 52.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307
Show More Show Less
A/C Solutions BMW E24 Complete Conversion Kit - M6 (S38B35) W/ Rear A/C
A/C Solutions BMW E24 Complete Conversion Kit - M6 (S38B35) W/ Rear A...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles With Rear A/C Only
A/C Solutions - Corporate Logo
T#:32350876
Part#: 24-M6-R
Ships in 4 Business Days
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
CSF E30 Parallel Flow Condenser + 13" SPAL Fan Combo
CSF E30 Parallel Flow Condenser + 13" SPAL Fan Combo
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29500098
Part#: ACS-30-CSF-SPAL-
Ships in 4 Business Days
$ 378.99 USD
Add to Wish List
$ 378.99 USD
Add to Wish List
Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser and SPAL fan upgrade will replace your factory condenser and auxiliary fan resulting in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. Note: In order to properly run any SPAL fan, additional wiring will be required What’s included? CSF parallel flow condenser (cross ref # 64538391509) Genuine SPAL 13" straight blade pusher fan 30A fuse Mounting hardware Detailed installation instructions Fitment notes: Additional wiring will be required For use with the following models: BMW E30 (all)
Show More Show Less
BMW E30 R134a Filter Drier (Early Model)
BMW E30 R134a Filter Drier (Early Model)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29500118
Part#: ACS-30-E-FD
Ships in 4 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 35.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the early high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For late-model applications, see ACS-30-L-FD For use with the following models (< 09/89): BMW E30 (all)
Show More Show Less
BMW E30 R134a Filter Drier (Late Model)
BMW E30 R134a Filter Drier (Late Model)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29500124
Part#: ACS-30-L-FD
Ships in 4 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 35.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the late model high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For early model applications, see ACS-30-E-FD For use with the following models (≥ 09/89): BMW E30 (all)
Show More Show Less
A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And More)
A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32284525
Part#: ACS3024VABMFKIT1
Ships in 4 Business Days
$ 663.00 USD
Add to Wish List
$ 663.00 USD
Add to Wish List
Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E30 using the E36 M3 Denso compressor. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. This setup is designed to work with the S50, S52, S54, M50, M52, and M54 engines, offering seamless integration and reliable performance. Which model (chassis) should I choose? Select the model (chassis) assigned to your E30 when it left the factory to ensure the proper line routing. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Denso manifold o-ring Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso compressor (Denso 471-1114 or 471-1115). BMW compressor bracket (64551730768) will be required to support the Denso compressor. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all)
Show More Show Less
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) W/ Rear A/C
A/C Solutions BMW E24 Complete Conversion Kit - 635CSi (M30B34) W/ Re...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 06/1987 with the M30B34 Engine & With Rear A/C
A/C Solutions - Corporate Logo
T#:32350874
Part#: 24-635-R-B34
Ships in 4 Business Days
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
A/C Solutions BMW E30 Sanden Conversion Line Set
A/C Solutions BMW E30 Sanden Conversion Line Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466768
Part#: ACS-30-AB-SET
Ships in 4 Business Days
$ 375.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 375.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Early Model
A/C Solutions BMW E30 Complete Conversion Kit - Early Model
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 09/87 Only
A/C Solutions - Corporate Logo
T#:32317688
Part#: E30M3EARLY
Ships in 3 Business Days
Starting at $ 1,883.00 USD
Add to Wish List
Starting at $ 1,883.00 USD
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And More)
A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87+ Only
A/C Solutions - Corporate Logo
T#:32350866
Part#: E3024VLATE
Ships in 3 Business Days
Starting at $ 1,844.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 1,844.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Late Model
A/C Solutions BMW E30 Complete Conversion Kit - Late Model
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/87+ Only
A/C Solutions - Corporate Logo
T#:32350825
Part#: E30M3LATE
Ships in 3 Business Days
Starting at $ 1,883.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 1,883.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E30 E28 E24 R134a O-Ring Kit
A/C Solutions BMW E30 E28 E24 R134a O-Ring Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466775
Part#: ACS-O-RING-KIT
Ships in 4 Business Days
$ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system to the modern HNBR R134a standard. This is cross compatible with all versions of the E30, E28, E24, and E23, and may include additional o-rings as a result. What’s included? 2x #12 R134a o-rings 4x #10 R134a o-rings 6x #8 R134a o-rings 5x #6 R134a o-rings Fitment notes: For use with the following models: BMW E23, E24, E28, E30, E32 Cross-reference part numbers: 64508390602, 64508390601, 64508390603, 64508390604, 64508390605, 64531350491
Show More Show Less
CSF E30 Parallel Flow Condenser
CSF E30 Parallel Flow Condenser
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29500095
Part#: ACS-30-CSF-KIT
Ships in 4 Business Days
$ 259.99 USD
Add to Wish List
$ 259.99 USD
Add to Wish List
Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser is used to replace your factory tube and fin condenser and is built to work with a SPAL 13" pusher fan (sold separately). This upgrade will result in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. What’s included? CSF parallel flow condenser (cross ref # 64538391509) Mounting hardware
Show More Show Less
R12 To R134a Low And High-Pressure Service Port Adapter Fittings
R12 To R134a Low And High-Pressure Service Port Adapter Fittings ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29666088
Part#: ACS-R134A-ADAPTE
Ships in 4 Business Days
$ 9.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 9.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed for use on the E24, E28, and E30, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports to charge the system with R134a. What’s included? R134a low and high-pressure service fittings Fitment notes: Low profile design allows for clearance around BMW E30 hood support. For use with the following models: BMW E23, E24, E28, E30
Show More Show Less
A/C Solutions R134a Retrofit Label
A/C Solutions R134a Retrofit Label
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466781
Part#: ACS-RETROFIT-LAB
Ships in 4 Business Days
$ 6.95 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 6.95 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed to mimic the factory BMW and Porsche design language, this engine bay label is used to document the amount and date of R134a added to the system after completing any A/C repair. This sticker is designed for high temp engine bay applications and should be placed in a visible spot for future service technicians to reference. Made in the USA. What’s included? A/C Solutions R134a retrofit label (3.75" wide) Cross reference part numbers: 64508363254
Show More Show Less
A/C Solutions Box Sticker
A/C Solutions Box Sticker
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29466780
Part#: ACS-BOX-STICKER
Ships in 4 Business Days
$ 2.75 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2.75 USD
Free Shipping on orders $49 and up
Add to Wish List
The original A/C Solutions box sticker - perfect for your corner window, tool chest, laptop, desk, and more. Made in the USA. What’s included? A/C Solutions box sticker (4" wide)
A/C Solutions BMW E30 High-Pressure Condenser Return Line - Early Model
A/C Solutions BMW E30 High-Pressure Condenser Return Line - Early Mod...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29300811
Part#: ACS-30-C-EARLY-S
Ships in 4 Business Days
$ 125.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 125.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed specifically for the early model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64539067572, 64531377857, 64531372608
Show More Show Less
A/C Solutions BMW E24 Complete Conversion Kit - 633CSi (09/1982+)
A/C Solutions BMW E24 Complete Conversion Kit - 633CSi (09/1982+) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced From 09/1982+
A/C Solutions - Corporate Logo
T#:32350871
Part#: 24-633-S
Ships in 4 Business Days
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 949.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
Denso Compressor Manifold R134a O-Ring
Denso Compressor Manifold R134a O-Ring
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32284523
Part#: 471-O-RING
Ships in 4 Business Days
$ 9.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 9.99 USD
Free Shipping on orders $49 and up
Add to Wish List
New HNBR manifold gasket designed for the E36 M3 Denso Compressor and/or our 24v Swap Denso Compressor Manifold to ensure your A/C system is properly sealed. This can be used with both R12 and R134a and meets or exceeds factory specifications. What’s included? Denso manifold o-ring Cross-reference part numbers: MT9519, 24156, 19188305, 88918403, 1531721, 471
Show More Show Less
A/C Solutions BMW S14 M10 Sanden Compressor Bracket
A/C Solutions BMW S14 M10 Sanden Compressor Bracket
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32118912
Part#: ACS-1014-KIT
Ships in 4 Business Days
$ 325.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 325.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using a fully isolated (bushed) design similar to that of the factory E30 M3 assembly. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and zinc-plated to withstand the toughest conditions without sacrificing the OEM look and feel. Overall package weight (including compressor) comes in at 17lbs (less than the original E30 M3 assembly) and boasts a tighter center of gravity for less stress on the isolator bushings. What’s included? A/C Solutions S14/M10 Sanden compressor bracket Yellow zinc 8.8 and 10.9 hardware Compressor ground wire Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. A larger V-belt will be required (Gates 13x875mm). For use with the following models: BMW E30 (318i, 320is, M3) PATENT PENDING Cross-reference part numbers: 64521268536, 64521277002, 64521706826, 07119932095, 07119904115, 07119901161, 07119905549, 07119932112, 07119932122, 07119904463, 07119900581, 07119902912, 07119913664, 64521268537, 64521268538, 32411705063, 07119900052, 07119907030, 07129946400, 07129905767, 64521278034, 07119912712, 07129964672, 64521278036, 64521276354, 07119901120, 07119903039
Show More Show Less
A/C Solutions BMW E30 Sanden Conversion Line Set
A/C Solutions BMW E30 Sanden Conversion Line Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32284522
Part#: ACS-30-1014-AB-S
Ships in 4 Business Days
$ 385.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 385.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212
Show More Show Less
A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And More)
A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced Up To 09/87 Only
A/C Solutions - Corporate Logo
T#:32350849
Part#: E3024VEARLY
Ships in 3 Business Days
Starting at $ 1,844.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 1,844.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Model
A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Mode...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:29300810
Part#: ACS-30-C-LATE-SE
Ships in 4 Business Days
$ 125.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 125.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64538391041, 64531381741, 61627198552
Show More Show Less
A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Late Model)
A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Late Mo...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32118921
Part#: AC301014CLATESET
Ships in 4 Business Days
$ 154.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 154.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed specifically for the late model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (320is, M3) Cross-reference part numbers: 64539067578, 64531386565
Show More Show Less
A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Early Model)
A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Early M...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32118922
Part#: A301014CEARLYSET
Ships in 4 Business Days
$ 154.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 154.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed specifically for the early model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (320is, M3) Cross reference part numbers: 64539067578, 64531386565
Show More Show Less
A/C Solutions E30 24v Swap Denso Compressor Manifold
A/C Solutions E30 24v Swap Denso Compressor Manifold
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
A/C Solutions - Corporate Logo
T#:32284524
Part#: ACS-24V
Ships in 4 Business Days
$ 230.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 230.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E30. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso Compressor (Denso 471-1114 or 471-1115) and the A/C Solutions E30 24v Swap Lines. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all) PATENT PENDING
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping