Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:11953
Part#: E9X-REAR-MOUNTS
In Stock
Sale - Save 15% $ 93.62

This product was last offered at the strikethrough price on
04-06-2026

$ 79.11 USD
Free Shipping
Sale - Save 15%
$ 93.62

This product was last offered at the strikethrough price on
04-06-2026

$ 79.11 USD
Free Shipping
A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
Febi Control Arm Bracket - Right - E30, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:376585
Part#: 31121139790
In Stock
$ 33.43

This product was last offered at the strikethrough price on
04-16-2026

$ 30.49 USD
Free Shipping on orders $49 and up
$ 30.49 USD
Free Shipping on orders $49 and up
Does not include a bushing
Febi Control Arm Bracket - Left - E30, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:376586
Part#: 31121139789
In Stock
$ 45.24

This product was last offered at the strikethrough price on
04-02-2026

$ 29.50 USD
Free Shipping on orders $49 and up
$ 29.50 USD
Free Shipping on orders $49 and up
Does not include a bushing

Febi Upper Strut Mount - E36, Z3, Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382546
Part#: 31336779613
In Stock
$ 37.99

This product was last offered at the strikethrough price on
04-20-2026

$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Should be replaced each time shocks are replaced due to this being a wearing item - made in Germany!

BMW Strut Mounting
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:5677345
Part#: 31306851879
In Stock at Vendor
$ 71.99

This product was last offered at the strikethrough price on
05-07-2026

$ 61.99 USD
Free Shipping on orders $49 and up
$ 61.99 USD
Free Shipping on orders $49 and up
Febi - Corporate Logo
T#:639975
Part#: 31306880438
In Stock
$ 93.99 USD
Free Shipping
$ 93.99 USD
Free Shipping

Febi - Corporate Logo
T#:374708
Part#: 33326775551
In Stock at Vendor
$ 27.42 USD
Free Shipping on orders $49 and up
Ideal for replacing worn or damaged components, the Febi Trailing Arm Ball Joint is an essential part for maintaining your vehicle's suspension system.
Packaged by Turner - Corporate Logo
T#:11958
Part#: E82MOUNTKIT
In Stock
Sale - Save 13% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 146.16 USD
Free Shipping
Sale - Save 13%
$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 146.16 USD
Free Shipping
Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:
  • front upper strut mounts (also known as a guide support), 31306775098
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!!

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i - Coupe
    2008-2012 E88 BMW 128i 135i - Convertible
  • Show More Show Less

    Febi Rear Shock Mount - E39
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382113
    Part#: 33521093416
    Ships in 2 Business Days
    $ 55.99

    This product was last offered at the strikethrough price on
    04-22-2026

    $ 47.99 USD
    Free Shipping on orders $49 and up
    $ 47.99 USD
    Free Shipping on orders $49 and up
    To be replaced when servicing rear shocks

    Packaged by Turner - Corporate Logo
    T#:21735879
    Part#: E30SUPRBM1042KT
    Ships in 6 Business Days
    Sale - Save 8% $ 1,011.00

    This product was last offered at the strikethrough price on
    07-07-2026

    $ 927.16 USD
    Free Shipping
    Sale - Save 8%
    $ 1,011.00

    This product was last offered at the strikethrough price on
    07-07-2026

    $ 927.16 USD
    Free Shipping
    Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:401618
    Part#: TSU4695PBX/16KT
    In Stock
    Sale - Save 19% $ 230.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 187.99 USD
    Free Shipping
    Sale - Save 19%
    $ 230.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 187.99 USD
    Free Shipping

    For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

     These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:11954
    Part#: TMS11954
    In Stock
    Sale - Save 4% $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 47.04 USD
    Free Shipping on orders $49 and up
    Sale - Save 4%
    $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 47.04 USD
    Free Shipping on orders $49 and up
    A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33506771737
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33506771738
    D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    The lower mount on the 1M/M3 is integrated on the shock absorber.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

    This item fits the following BMWs:
    2011-2012 E82 BMW 1M
    2008-2011 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Show More Show Less


    Front Upper Strut Mount - E39 540i M5 and Z8
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:2148
    Part#: 31331091708
    In Stock
    $ 62.99 USD
    Free Shipping on orders $49 and up
    Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This front shock tower bearing fits BMW E39 540i M5 and Z8.

    It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

    This item fits the following BMWs:
    1997-2003 E39 BMW 540i M5
    1997-2003 E39 BMW 528i 530i - only for cars with EDC - electronic damping control E52 BMW Z8 Z8 Alpina
    Show More Show Less
    Front Upper Strut Mount - E38 740i/il 750i/il
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:7741
    Part#: 31331090611
    Ships in 7 Business Days
    $ 28.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 24.99 USD
    Free Shipping on orders $49 and up
    $ 24.99 USD
    Free Shipping on orders $49 and up
    Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This shock tower bearing fits E38 7 series.

    It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

    Sold individually

    This item fits the following BMWs:
    1995-2001 E38 BMW 740i 740il 750il
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:339943
    Part#: E46-MY-DIFF
    In Stock
    $ 88.99

    This product was last offered at the strikethrough price on
    02-26-2026

    Starting at $ 55.99 USD
    Free Shipping on orders $49 and up
    Starting at $ 55.99 USD
    Free Shipping on orders $49 and up
    These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

    The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster
    Show More Show Less

    OEM BMW Rear Differential Mount - E46, E83 X3, E85 Z4
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:12525
    Part#: 33176751808
    In Stock
    $ 44.99

    This product was last offered at the strikethrough price on
    04-18-2026

    $ 27.99 USD
    Free Shipping on orders $49 and up
    $ 27.99 USD
    Free Shipping on orders $49 and up
    RUBBER MOUNTING REAR:331020

    Febi M3 Control Arm Bushing Set - E30, E36
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:363815
    Part#: 31129069035
    In Stock at Vendor
    $ 30.99 USD
    Free Shipping on orders $49 and up
    $ 30.99 USD
    Free Shipping on orders $49 and up
    Bushings only, need to be pressed into bracket
    Packaged by Turner - Corporate Logo
    T#:340289
    Part#: TMS11957
    In Stock
    Sale - Save 10% $ 166.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 149.83 USD
    Free Shipping
    Sale - Save 10%
    $ 166.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 149.83 USD
    Free Shipping
    New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There are no special tools required and don't take any extra time!

    Included in the Xi Mount Kit:
  • front upper strut mounts (also known as a guide support), 31336775097 or 31306785962
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!! Select the kit that fits the production date of your car below.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
  • Show More Show Less

    Febi Front Ball Joint - E90, E91, E92
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:381946
    Part#: 31126768988
    In Stock
    $ 43.99 USD
    Free Shipping on orders $49 and up
    Bolts to the curved control arm.
    Packaged by Turner - Corporate Logo
    T#:343068
    Part#: TSU9995PB3KT
    In Stock
    Sale - Save 18% $ 117.99

    This product was last offered at the strikethrough price on
    03-17-2026

    $ 97.30 USD
    Free Shipping
    Sale - Save 18%
    $ 117.99

    This product was last offered at the strikethrough price on
    03-17-2026

    $ 97.30 USD
    Free Shipping
    Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
    Show More Show Less

    Febi Rear Shock Mount - E83
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382610
    Part#: 33503450542
    In Stock
    $ 31.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 22.99 USD
    Limited Qty Sale
    Free Shipping on orders $49 and up
    $ 31.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 22.99 USD
    Limited Qty Sale
    Free Shipping on orders $49 and up
    Two required per vehicle

    Febi Front Strut Mount - E39, E46, E83
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382542
    Part#: 31336752735
    In Stock at Vendor
    $ 64.99 USD
    Free Shipping
    $ 64.99 USD
    Free Shipping
    Strut mount with bearing
    Febi Rear Shock Mount - E38
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382612
    Part#: 33521094091
    In Stock at Vendor
    $ 52.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 45.99 USD
    Free Shipping on orders $49 and up
    $ 45.99 USD
    Free Shipping on orders $49 and up
    Replacement is recommended when servicing rear shocks
    Febi - Corporate Logo
    T#:363781
    Part#: 33326770985
    In Stock at Vendor
    $ 56.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 55.99 USD
    Free Shipping on orders $49 and up
    $ 55.99 USD
    Free Shipping on orders $49 and up
    Located in the lower rear trailing arm


    Rear Subframe Bushings/Mounts - Rubber Street - E30 (Pair)
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:360171
    Part#: 33311129144KT
    In Stock
    $ 65.99 USD
    Free Shipping
    $ 65.99 USD
    Free Shipping
    The E30 rear subframe is held into the chassis by two bolts going through these rubber mounts. A lot of suspension motion, chassis flex, and driveline torque has to go through these two points, which makes them notorious for failure. When they do, the subframe will move around, playing havoc with your suspension's alignment and settings and making a very annoying clunk. These are direct replacement rubber mounts, sold as a pair.

    This item fits the following BMWs:
    1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
    Show More Show Less
    Febi Tension Strut Bushing - E70, E71
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:376763
    Part#: 31106778015
    In Stock at Vendor
    $ 43.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 38.00 USD
    Free Shipping on orders $49 and up
    $ 38.00 USD
    Free Shipping on orders $49 and up
    Used on the tension strut
    Febi - Corporate Logo
    T#:3668
    Part#: 31331092885
    In Stock at Vendor
    $ 55.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 53.99 USD
    Free Shipping on orders $49 and up
    $ 53.99 USD
    Free Shipping on orders $49 and up
    The strut mounts (or guide support) locate the front strut to the chassis of the car. They are a very durable rubber meant to absorb vibration and impacts from bumps, potholes, etc. There is also a bearing inside that allows the strut shaft to turn independent of the rest of the suspension. Therefore, the front strut mount is a very critical piece on the E36 suspension. These mounts generally last 100,000 miles or more but it would be a good idea to change them with every strut replacement. Alternate part number - 31336779613 .
    Price is per mount. Left and Right are the same part.

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    Show More Show Less

    Differential Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382582
    Part#: 33171131903
    Ships in 6 Business Days
    $ 28.03 USD
    Free Shipping on orders $49 and up

    Febi Sway Bar Bushing - E36
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382547
    Part#: 31351091228
    Ships on Oct 20, 2026
    $ 20.99 USD
    Free Shipping on orders $49 and up
    $ 20.99 USD
    Free Shipping on orders $49 and up
    23.5mm diameter sway bar
    Febi Rear Shock Mount - E30, E36, E46, Z3, Z4
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:350799
    Part#: 33526779670
    Ships on Oct 19, 2026
    $ 20.99 USD
    Free Shipping on orders $49 and up
    $ 20.99 USD
    Free Shipping on orders $49 and up
    Two required per vehicle

    Febi - Corporate Logo
    T#:382607
    Part#: 33329061946
    Back Ordered
    $ 21.99 USD
    Free Shipping on orders $49 and up
    Sold individually. Two bushings are required to complete one side. Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338064
    Part#: 31129069035
    Ships on Jan 13, 2027
    Starting at $ 46.99 USD
    Free Shipping on orders $49 and up
    Starting at $ 46.99 USD
    Free Shipping on orders $49 and up
    Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

    These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

    For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1996-1999 E36 BMW M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
    Show More Show Less

    Febi - Corporate Logo
    T#:382536
    Part#: 31306775098
    Back Ordered
    $ 39.99 USD
    Free Shipping on orders $49 and up
    $ 39.99 USD
    Free Shipping on orders $49 and up
    Strut mount with bearing

    Packaged by Turner - Corporate Logo
    T#:554760
    Part#: E9XXISIKT
    In Stock
    Sale - Save 3% $ 373.99

    This product was last offered at the strikethrough price on
    07-16-2026

    $ 363.07 USD
    Free Shipping
    Sale - Save 3%
    $ 373.99

    This product was last offered at the strikethrough price on
    07-16-2026

    $ 363.07 USD
    Free Shipping

    Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs. 

    This item fits the following BMWs: 
    2006-2012 E9X BMW All xi models - 325xi 328xi 330xi 335xi

    Show More Show Less
    Febi Front Control Arm Bracket - Left - E36, Z3
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:381927
    Part#: 31121136531
    In Stock at Vendor
    $ 61.99 USD
    Free Shipping on orders $49 and up
    Includes pressed in bushings
    Febi Front Control Arm Bracket - Right - E36, Z3
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:381928
    Part#: 31121136532
    Ships in 2 Business Days
    $ 61.61

    This product was last offered at the strikethrough price on
    05-29-2026

    $ 54.65 USD
    Free Shipping on orders $49 and up
    $ 54.65 USD
    Free Shipping on orders $49 and up
    Includes pressed in bushings


    Packaged by Turner - Corporate Logo
    T#:11978
    Part#: TMS11978
    Ships in 3 Business Days
    $ 200.88

    This product was last offered at the strikethrough price on
    07-09-2026

    $ 195.16 USD
    Free Shipping
    $ 195.16 USD
    Free Shipping
    Some E34 5 series came equipped with self leveling suspension to provide a stable ride height when carrying extra passengers. While it helped to improve ride quality it is not always the best for performance, and the self leveling system parts can be very expensive to replace. Our self leveling delete kit provides all the parts required to convert your E34 sedan to a standard type suspension. Shocks and Springs are sold separately. We recommend Bilstein Shocks and H&R springs for improved performance.

    Kit includes:
    2 - 33521132270 - Rear Shock Mount / Guide Support
    2 - 33531133671 - Spring Pad Lower
    2 - 33521136063 - Support
    2 - 33531133670 - Spring Pad Upper
    4 - 33521129565 - Washer
    2 - 33531135624 - Additional Shock Absorber (bump stop)
    2 - 31331134314 - Shock Protection Tube
    2 - 34326757282 - Intermediate Piece


    This item fits the following BMWs:
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1991-1995 E34 BMW 525i 530i - Wagon - Factory Euro Non-Leveling Springs Recommended.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340768
    Part#: 33316770781KT
    In Stock at Vendor
    Sale - Save 35% $ 156.99

    This product was last offered at the strikethrough price on
    04-16-2026

    $ 101.44 USD
    Free Shipping on orders $49 and up
    Sale - Save 35%
    $ 156.99

    This product was last offered at the strikethrough price on
    04-16-2026

    $ 101.44 USD
    Free Shipping on orders $49 and up
    The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. This kit comprises OEM Lemforder and Meyle HD rubber subframe mounts. Solid aluminum mounts are also available with very little increase in NVH.
    Show More Show Less
    Febi Front Control Arm Bushing Set - E46, Z4
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:374072
    Part#: 31126783376
    In Stock at Vendor
    $ 107.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 104.99 USD
    Free Shipping
    $ 104.99 USD
    Free Shipping
    Includes brackets

    Febi Front Ball Joint - E53
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:361072
    Part#: 31126756491
    In Stock at Vendor
    $ 24.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 23.99 USD
    Free Shipping on orders $49 and up
    $ 23.99 USD
    Free Shipping on orders $49 and up
    This ball joint includes installation hardware

    Packaged by Turner - Corporate Logo
    T#:401688
    Part#: 33117512980KT
    Ships in 3 Business Days
    $ 366.99 USD
    Free Shipping
    $ 366.99 USD
    Free Shipping

    The perfect upgrade for any E46, this finned differential cover increases cooling to the rear differential to prevent over heating and possible damage. This is a complete kit including fluid and drain plugs.

    Includes the following

    • Aluminum finned differential cover
    • Drain & fill plug with sealing o-ring
    • 2 Quarts of Redline 75w90
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:386282
    Part#: E9X-DIFF-MOUNTS
    Ships in 3 Business Days
    $ 193.25 USD
    Free Shipping
    $ 193.25 USD
    Free Shipping

    This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.

    This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.

    E9X Diff Mount Set includes:

    • 33176760287 x 2, front differential mount
    • 33176770866 x 1, rear differential mount
    • (new hardware is optional and can be ordered separately below)

      This item fits the following BMWs:
      2008-2012 E82 BMW 128i 135i
      2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
      2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
      2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
      2007-2013 E93 BMW 328i 335i - Convertible
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:11950
    Part#: E9XM3MOUNTKIT
    In Stock
    $ 649.50 USD
    Free Shipping
    $ 649.50 USD
    Free Shipping
    Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

    The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

    This package is for cars NOT equipped with the EDC suspension.

    Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs without EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
  • Show More Show Less
    Febi Front Control Arm Bushings - Pair - E30
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382528
    Part#: 31129058931
    In Stock
    $ 27.99 USD
    Free Shipping on orders $49 and up
    Includes left and right bushings

    Packaged by Turner - Corporate Logo
    T#:338659
    Part#: E30MOUNTKIT
    Back Ordered
    Sale - Save 3% $ 286.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 278.38 USD
    Free Shipping
    Sale - Save 3%
    $ 286.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 278.38 USD
    Free Shipping
    This package of mounts includes the front and rear mounts that should also be installed when replacing your struts and shocks. Don't overlook your rubber suspension mounts as they wear out just as fast (or faster) as the shocks themselves. Installing these new mounts does not take any additional time, effort, or special tools. These are direct replacements for the mounts already on the car.

    E30 Mount Kit includes -
  • Front upper strut mounts (guide support), standard alignment settings (not offset)
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount gaskets
    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:348546
    Part#: TMS11812DK
    Ships on Oct 2, 2026
    Starting at $ 439.77 USD
    Free Shipping
    Starting at $ 439.77 USD
    Free Shipping

    This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:

    • Front strut mounts (also known as guide support)
    • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
    • Front strut tower paper washer gaskets
    • Front and rear self-locking mounting nuts
    • Rear Lifetime Warranty 'Repair Shop' shock mounts
    • Rear shock mount reinforcements (to prevent cracking of shock towers)
    • Rear shock mount gaskets

    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    1996-2002 Z3 BMW 2.5 2.5i 2.8 3.0i M Coupe

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:24344778
    Part#: ECSTMSPDBKT
    In Stock
    Sale - Save 8% $ 1,190.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,096.14 USD
    Free Shipping on orders $49 and up
    Sale - Save 8%
    $ 1,190.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,096.14 USD
    Free Shipping on orders $49 and up
    Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:11758
    Part#: E46REARBUSHINGS
    Back Ordered
    Sale - Save 10% $ 746.04

    This product was last offered at the strikethrough price on
    02-26-2026

    $ 672.66 USD
    Free Shipping
    Sale - Save 10%
    $ 746.04

    This product was last offered at the strikethrough price on
    02-26-2026

    $ 672.66 USD
    Free Shipping
    This package is a complete overhaul of the rear suspension bushings in the E46 3-series. If your car is not feeling as crisp, has irregular tire wear, or has inconsistent (and unsafe) handling it's likely the rear bushings. We put together this package as a total overhaul to restore your car back to its original feel. Depending on the symptoms and diagnosis from your mechanic, it may be logical to replace all of the bushings in the rear suspension (there are 19 total). This is especially true if the subframe is being removed to repair or reinforce the rear floor (prone to failure).

    Turner Motorsport is a big believer in using rubber bushings for street cars. Urethanes, Delrin, or aluminum are generally good for reducing compliance and limiting deflection - attributes that don't really work well on roads filled with potholes, railroad crossings, cracks, and expansion joints. The rubber bushings maintain the factory ride/handling traits that won the 3-series praise all over the world. Every bushing will need maintenance or replacement at some point and rubber has proven to last the longest and need less maintenance than anything else, even urethane. And unless competitive driving is your goal, the harder materials are only a gimmick.

    Individual Item Descriptions:
    Trailing Arm Bushings and Limiters (33 32 2 228 153 and TSU9990001) - our OEM rubber replacement trailing arm bushings (RTABs) are a perfect fit and help maintain rear toe alignment. The Limiters prevent premature bushing wear.
    Rear Inner Control Arm Bushings (upper 33 32 1 092 247 and lower 33 32 6 770 824) - new stock inner rubber bushings for the upper spring arm and the lower camber arm. These do not wear out very quickly but should be replaced as a 'While you're in there...' job.
    Rear Outer Control Arm Bushings (upper and lower) (33 32 6 775 551) - outer ball joints for the upper spring arm and the lower camber arm. These are the standard ball joint design found on the M3 and are a direct replacement upgrade on the other E46 models.
    Rear Shock Mounts (JTD909) - Our very best JT Designs rear shock mounts with gaskets and hardware. If your mounts have not been replaced in the last 40,000 miles, now is the perfect time. Skip this option if you recently replaced mounts or already have an upgraded mount.
    Rear Shock Mount Reinforcements (TSU9975100) - Even if your shock mounts are new or recent, the sheetmetal of the rear shock tower can still fatigue, leaving you with a very dangerous and expensive fix. These reinforcements are extra-thick, providing crucial strength to one of the weakest points on the car. They work with nearly every shock mount.
    Differential mounts (33 17 1 093 175MY and 33 17 6 751 808MY) - Now is a great time to replace the rubber-isolated differential mounts. The diff mounts take the bulk of the twisting and binding as power is transmitted through the differential. We use a Meyle HD rubber bushing for the rear mount as it's stronger than the factory part.
    Rear subframe mounts (33 31 6 770 783, 33 31 6 770 784, and 33 31 6 770 781 x 2) - The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    Show More Show Less