BMW Suspension Bushings & Mounts

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

The BMW E30 3 Series Front Sway Bar Bushing (22mm) is a vital suspension component for the E30 models produced from 1984 to 1991. These bushings play an important role in the performance of the front sway bar, enhancing stability and handling during dynamic driving situations.

Key Features:

1. Tailored for 22mm Sway Bars:

   • Specifically designed for E30 models with a 22mm front sway bar, ensuring a precise fit that optimizes performance and reduces body roll.

2. Functionality:

   • These bushings connect the sway bar to the chassis, allowing it to effectively minimize body roll when cornering. This connection enhances the vehicle’s stability and handling characteristics, resulting in a more confident driving experience.

3. Material Options:

   • Available in rubber and polyurethane:
     • Rubber bushings provide a comfortable and quiet ride but may wear out more quickly over time.
     • Polyurethane bushings offer increased durability and performance, minimizing flex for improved handling and responsiveness, making them a preferred choice for performance enthusiasts.

4. Performance Enhancement:

   • Replacing worn or degraded bushings can significantly improve handling dynamics, resulting in sharper steering response and better overall control during aggressive driving.

5. Compatibility:

   • Designed specifically for the BMW E30 3 Series, these bushings help preserve the classic driving dynamics that E30 enthusiasts cherish, making them ideal for both everyday driving and spirited outings.

6. Installation Process:

   • Installing new sway bar bushings typically involves detaching the sway bar from the suspension system. While some experienced DIYers can manage this task, professional installation is often recommended for optimal alignment and performance.

Benefits of Replacement or Upgrade:

• Enhanced Cornering Performance: New bushings improve the effectiveness of the sway bar, resulting in less body roll and improved cornering stability.
• Increased Steering Feedback: Fresh bushings provide better communication between the vehicle and driver, enhancing the overall driving experience.
• Longevity: Upgrading to polyurethane bushings increases the lifespan of the sway bar components, reducing the need for frequent replacements.

In summary, the BMW E30 3 Series Front Sway Bar Bushing (22mm) is an essential component for maintaining the performance and handling of these classic BMWs. Whether you’re replacing old bushings or upgrading to polyurethane for enhanced durability and performance, ensuring these components are in top condition is crucial for enjoying the legendary driving dynamics of the E30.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride. Factory upgrade for Non-M vehicles.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMW chassis:
E36,E46,Z3

he Powerflex Front Radius Arm Bushings for the BMW G80 M3 / G82, G83 M4 are performance upgrades designed to replace the factory rubber bushings with durable polyurethane ones. Here's a simplified description:

• Material: Made from tough polyurethane, which lasts longer than standard rubber and resists wear, oil, and contaminants.
• Improved Handling: Reduces flex in the suspension, leading to sharper handling, better steering feel, and more stability during cornering and braking.
• Enhanced Control: Reduces deflection, providing a more connected and responsive driving experience.
• Durability: Withstands harsh conditions, offering longer life and less maintenance.

These bushings are a direct fit for the BMW G80 M3 and G82/G83 M4 and are ideal for drivers looking for improved performance with minimal changes to ride comfort.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1995 - 2002 M Coupe Z3 2.8 Z3 3.0
1995 - 2002 M Roadster Z3 Z3 2.3 Z3 2.5 Z3 2.8 Z3 3.0